qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [RFC PATCH v2 47/49] replay: replay_break command


From: Pavel Dovgalyuk
Subject: [Qemu-devel] [RFC PATCH v2 47/49] replay: replay_break command
Date: Thu, 17 Jul 2014 15:06:22 +0400
User-agent: StGit/0.16

This patch adds support for replay_break monitor command. This command
sets the step (measured in executed instructions) where replay should be
stopped.

Signed-off-by: Pavel Dovgalyuk <address@hidden>
---
 hmp-commands.hx     |   14 ++++++++++++++
 monitor.c           |   15 +++++++++++++++
 qapi-schema.json    |   11 +++++++++++
 qmp-commands.hx     |   23 +++++++++++++++++++++++
 replay/replay-qmp.c |   13 +++++++++++++
 replay/replay.c     |   24 +++++++++++++++++++++++-
 replay/replay.h     |    2 ++
 7 files changed, 101 insertions(+), 1 deletions(-)

diff --git a/hmp-commands.hx b/hmp-commands.hx
index 19174f1..3eaa80e 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1801,6 +1801,20 @@ STEXI
 Shows information about replay process.
 ETEXI
 
+    {
+        .name       = "replay_break",
+        .args_type  = "step:l",
+        .params     = "step",
+        .help       = "stop replaying at the specified replay step",
+        .mhandler.cmd = do_replay_break,
+    },
+
+STEXI
address@hidden replay_break @var{step}
+Stops replaying at the specified @var{step}.
+
+ETEXI
+
 STEXI
 @end table
 ETEXI
diff --git a/monitor.c b/monitor.c
index f336b91..4710a59 100644
--- a/monitor.c
+++ b/monitor.c
@@ -1190,6 +1190,21 @@ static void do_replay_info(Monitor *mon, const QDict 
*qdict)
     }
 }
 
+static void do_replay_break(Monitor *mon, const QDict *qdict)
+{
+    if (replay_mode == REPLAY_PLAY) {
+        uint64_t step = qdict_get_int(qdict, "step");
+        if (step >= replay_get_current_step()) {
+            monitor_printf(mon, "Setting break at step: %" PRId64 "\n", step);
+            replay_set_break(step);
+        } else {
+            monitor_printf(mon, "Cannot stop on the preceding step.\n");
+        }
+    } else {
+        monitor_printf(mon, "You can stop at the specific step only in PLAY 
mode.\n");
+    }
+}
+
 static void monitor_printc(Monitor *mon, int c)
 {
     monitor_printf(mon, "'");
diff --git a/qapi-schema.json b/qapi-schema.json
index c45f795..d0a4651 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -3518,3 +3518,14 @@
 # Since:  2.2
 ##
 { 'command': 'replay_info', 'returns': 'ReplayInfo' }
+
+##
+# @replay_break
+#
+# Sets breakpoint at the specified step of replaying
+#
+# @step: step where breakpoint should be set
+#
+# Since:  2.2
+##
+{ 'command': 'replay_break', 'data': { 'step': 'uint64' } }
diff --git a/qmp-commands.hx b/qmp-commands.hx
index d475633..575db76 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -3769,3 +3769,26 @@ replay_info
 Shows information about replay process.
 
 EQMP
+
+    {
+        .name       = "replay_break",
+        .args_type  = "step:l",
+        .mhandler.cmd_new = qmp_marshal_input_replay_break,
+    },
+
+SQMP
+replay_break
+------------
+
+Sets breakpoint at the specified replay step.
+
+Arguments:
+
+- "step": step where breakpoint should be set
+
+Example:
+
+-> { "execute": "replay_break", "arguments": { "step": 1024 } }
+<- { "return": {} }
+
+EQMP
diff --git a/replay/replay-qmp.c b/replay/replay-qmp.c
index 966bd4d..a9f30da 100755
--- a/replay/replay-qmp.c
+++ b/replay/replay-qmp.c
@@ -27,3 +27,16 @@ ReplayInfo *qmp_replay_info(Error **errp)
 
     return info;
 }
+
+void qmp_replay_break(uint64_t step, Error **errp)
+{
+    if (replay_mode == REPLAY_PLAY) {
+        if (step >= replay_get_current_step()) {
+            replay_set_break(step);
+        } else {
+            error_setg(errp, "Cannot stop on the preceding step");
+        }
+    } else {
+        error_setg(errp, "replay_break can be used only in PLAY mode");
+    }
+}
diff --git a/replay/replay.c b/replay/replay.c
index f711c26..d6949d6 100755
--- a/replay/replay.c
+++ b/replay/replay.c
@@ -31,6 +31,8 @@ static char *replay_filename;
 char *replay_image_suffix;
 
 ReplayState replay_state;
+/*! Step for stopping execution at. */
+static uint64_t replay_break_step = -1;
 
 /* 
     Auto-saving for VM states data 
@@ -284,6 +286,19 @@ void replay_instruction(int process_events)
         } else if (replay_mode == REPLAY_PLAY) {
             skip_async_events_until(EVENT_INSTRUCTION);
             if (first_cpu->instructions_count >= 1) {
+                if (replay_get_current_step() == replay_break_step) {
+                    replay_break_step = -1;
+
+                    /* for stopping VM */
+                    if (play_submode == REPLAY_PLAY_NORMAL) {
+                        first_cpu->exception_index = EXCP_DEBUG;
+                        monitor_printf(default_mon, "Execution has 
stopped.\n");
+                        vm_stop(EXCP_DEBUG);
+                    }
+                    /* for breaking execution loop */
+                    cpu_exit(first_cpu);
+                    return;
+                }
                 ++replay_state.current_step;
                 --first_cpu->instructions_count;
                 if (first_cpu->instructions_count == 0) {
@@ -312,7 +327,8 @@ bool replay_has_async_request(void)
     }
 
     if (replay_mode == REPLAY_PLAY) {
-        if (skip_async_events(EVENT_ASYNC)) {
+        if (skip_async_events(EVENT_ASYNC)
+            || replay_get_current_step() == replay_break_step) {
             return true;
         }
 
@@ -470,6 +486,7 @@ static void replay_enable(const char *fname, int mode)
     replay_state.skipping_instruction = 0;
     replay_state.current_step = 0;
     current_saved_state = 0;
+    replay_break_step = -1;
 
     replay_net_init();
 
@@ -663,3 +680,8 @@ const char *replay_get_play_submode_name(void)
         return "unknown";
     }
 }
+
+void replay_set_break(uint64_t step)
+{
+    replay_break_step = step;
+}
diff --git a/replay/replay.h b/replay/replay.h
index ee0460f..9a20a3b 100755
--- a/replay/replay.h
+++ b/replay/replay.h
@@ -65,6 +65,8 @@ void replay_configure(struct QemuOpts *opts, int mode);
 void replay_init_timer(void);
 /*! Closes replay log file and frees other resources. */
 void replay_finish(void);
+/*! Sets step where execution should be stopped. */
+void replay_set_break(uint64_t step);
 
 /* Processing the instructions */
 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]