qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v3 30/32] target-arm: make PAR banked


From: Aggeler Fabian
Subject: Re: [Qemu-devel] [PATCH v3 30/32] target-arm: make PAR banked
Date: Tue, 17 Jun 2014 07:15:10 +0000

On 14 Jun 2014, at 00:49, Greg Bellows <address@hidden<mailto:address@hidden>> 
wrote:




On 10 June 2014 18:55, Fabian Aggeler <address@hidden<mailto:address@hidden>> 
wrote:
When EL3 is running in Aarch32 (or ARMv7 with Security Extensions)
PAR has a secure and a non-secure instance.

Signed-off-by: Fabian Aggeler <address@hidden<mailto:address@hidden>>
---
 target-arm/cpu.h    | 10 +++++++++-
 target-arm/helper.c | 25 ++++++++++++++-----------
 2 files changed, 23 insertions(+), 12 deletions(-)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 7f5124c..048ede9 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -299,7 +299,15 @@ typedef struct CPUARMState {
             };
         };
         uint64_t far_el3;
-        uint64_t par_el1;  /* Translation result. */
+        struct { /* Translation result. */
+            union {
+                uint64_t par_ns;
+                uint64_t par_s;
+            };
+            union {
+                uint64_t par_el1;
+            };
+        };

This is broken.  This should be a union of structs rather than a struct of 
unions.  Should instead be.

union {
    struct {
        uint64_t par_ns;
        uint64_t par_s;
    };
    struct {
        uint64_t par_el1;
    };
};


Right, that should have been the other way round, like you said.

         uint32_t c9_insn; /* Cache lockdown registers.  */
         uint32_t c9_data;
         uint32_t c9_pmcr; /* performance monitor control register */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 47bf7a7..c3195bd 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1281,7 +1281,7 @@ static void ats_write(CPUARMState *env, const 
ARMCPRegInfo *ri, uint64_t value)
              * fault.
              */
         }
-        env->cp15.par_el1 = par64;
+        A32_BANKED_CURRENT_REG_SET(env, par, par64);
     } else {
         /* ret is a DFSR/IFSR value for the short descriptor
          * translation table format (with WnR always clear).
@@ -1291,14 +1291,16 @@ static void ats_write(CPUARMState *env, const 
ARMCPRegInfo *ri, uint64_t value)
             /* We do not set any attribute bits in the PAR */
             if (page_size == (1 << 24)
                 && arm_feature(env, ARM_FEATURE_V7)) {
-                env->cp15.par_el1 = (phys_addr & 0xff000000) | 1 << 1;
+                A32_BANKED_CURRENT_REG_SET(env, par,
+                        (phys_addr & 0xff000000) | 1 << 1);
             } else {
-                env->cp15.par_el1 = phys_addr & 0xfffff000;
+                A32_BANKED_CURRENT_REG_SET(env, par, phys_addr & 0xfffff000);
             }
         } else {
-            env->cp15.par_el1 = ((ret & (1 << 10)) >> 5) |
-                ((ret & (1 << 12)) >> 6) |
-                ((ret & 0xf) << 1) | 1;
+            A32_BANKED_CURRENT_REG_SET(env, par,
+                    ((ret & (1 << 10)) >> 5) |
+                    ((ret & (1 << 12)) >> 6) |
+                    ((ret & 0xf) << 1) | 1);
         }
     }
 }
@@ -1306,9 +1308,9 @@ static void ats_write(CPUARMState *env, const 
ARMCPRegInfo *ri, uint64_t value)

 static const ARMCPRegInfo vapa_cp_reginfo[] = {
     { .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0,
-      .access = PL1_RW, .resetvalue = 0,
-      .fieldoffset = offsetoflow32(CPUARMState, cp15.par_el1),
-      .writefn = par_write },
+      .access = PL1_RW, .resetvalue = 0, .writefn = par_write,
+      .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.par_s),
+                             offsetoflow32(CPUARMState, cp15.par_ns) } },
 #ifndef CONFIG_USER_ONLY
     { .name = "ATS", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = CP_ANY,
       .access = PL1_W, .accessfn = ats_access,
@@ -1755,8 +1757,9 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
     { .name = "DBGDSAR", .cp = 14, .crm = 2, .opc1 = 0,
       .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 },
     { .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0,
-      .access = PL1_RW, .type = ARM_CP_64BIT,
-      .fieldoffset = offsetof(CPUARMState, cp15.par_el1), .resetvalue = 0 },
+      .access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0,
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.par_s),
+                             offsetof(CPUARMState, cp15.par_ns)} },
     { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
       .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
       .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
--
1.8.3.2






reply via email to

[Prev in Thread] Current Thread [Next in Thread]