[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] target-arm: Prepare cpreg writefns/readfns for
From: |
Aggeler Fabian |
Subject: |
Re: [Qemu-devel] [PATCH] target-arm: Prepare cpreg writefns/readfns for EL3/SecExt |
Date: |
Fri, 30 May 2014 11:12:37 +0000 |
Ping. This patch was suggested to be sent separately but I can also
include it to the TZ patchset again.
http://patchwork.ozlabs.org/patch/349592/
Thanks,
Fabian
On 16 May 2014, at 14:43, Fabian Aggeler <address@hidden> wrote:
> This patch changes some readfns/writefns to use raw_write
> and raw_read functions, wich use the fieldoffset specified
> in ARMCPRegInfo instead of directly accessing the field.
> This will simplify patches for EL3 & Security Extensions.
>
> Signed-off-by: Fabian Aggeler <address@hidden>
> ---
> This patch was previously part of the Security Extension patchset
> but is not really Sec-Ext specific.
>
> target-arm/helper.c | 30 +++++++++++++++---------------
> 1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/target-arm/helper.c b/target-arm/helper.c
> index 417161e..6302d67 100644
> --- a/target-arm/helper.c
> +++ b/target-arm/helper.c
> @@ -319,7 +319,7 @@ static void dacr_write(CPUARMState *env, const
> ARMCPRegInfo *ri, uint64_t value)
> {
> ARMCPU *cpu = arm_env_get_cpu(env);
>
> - env->cp15.c3 = value;
> + raw_write(env, ri, value);
> tlb_flush(CPU(cpu), 1); /* Flush TLB as domain not tracked in TLB */
> }
>
> @@ -327,12 +327,12 @@ static void fcse_write(CPUARMState *env, const
> ARMCPRegInfo *ri, uint64_t value)
> {
> ARMCPU *cpu = arm_env_get_cpu(env);
>
> - if (env->cp15.c13_fcse != value) {
> + if (raw_read(env, ri) != value) {
> /* Unlike real hardware the qemu TLB uses virtual addresses,
> * not modified virtual addresses, so this causes a TLB flush.
> */
> tlb_flush(CPU(cpu), 1);
> - env->cp15.c13_fcse = value;
> + raw_write(env, ri, value);
> }
> }
>
> @@ -341,7 +341,7 @@ static void contextidr_write(CPUARMState *env, const
> ARMCPRegInfo *ri,
> {
> ARMCPU *cpu = arm_env_get_cpu(env);
>
> - if (env->cp15.contextidr_el1 != value && !arm_feature(env,
> ARM_FEATURE_MPU)
> + if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_MPU)
> && !extended_addresses_enabled(env)) {
> /* For VMSA (when not using the LPAE long descriptor page table
> * format) this register includes the ASID, so do a TLB flush.
> @@ -349,7 +349,7 @@ static void contextidr_write(CPUARMState *env, const
> ARMCPRegInfo *ri,
> */
> tlb_flush(CPU(cpu), 1);
> }
> - env->cp15.contextidr_el1 = value;
> + raw_write(env, ri, value);
> }
>
> static void tlbiall_write(CPUARMState *env, const ARMCPRegInfo *ri,
> @@ -657,7 +657,7 @@ static void vbar_write(CPUARMState *env, const
> ARMCPRegInfo *ri,
> * contexts. (ARMv8 would permit us to do no masking at all, but ARMv7
> * requires the bottom five bits to be RAZ/WI because they're UNK/SBZP.)
> */
> - env->cp15.c12_vbar = value & ~0x1FULL;
> + raw_write(env, ri, value & ~0x1Ful);
> }
>
> static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri)
> @@ -669,7 +669,7 @@ static uint64_t ccsidr_read(CPUARMState *env, const
> ARMCPRegInfo *ri)
> static void csselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
> uint64_t value)
> {
> - env->cp15.c0_cssel = value & 0xf;
> + raw_write(env, ri, value & 0xf);
> }
>
> static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri)
> @@ -1192,11 +1192,11 @@ static const ARMCPRegInfo generic_timer_cp_reginfo[]
> = {
> static void par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t
> value)
> {
> if (arm_feature(env, ARM_FEATURE_LPAE)) {
> - env->cp15.par_el1 = value;
> + raw_write(env, ri, value);
> } else if (arm_feature(env, ARM_FEATURE_V7)) {
> - env->cp15.par_el1 = value & 0xfffff6ff;
> + raw_write(env, ri, value & 0xfffff6ff);
> } else {
> - env->cp15.par_el1 = value & 0xfffff1ff;
> + raw_write(env, ri, value & 0xfffff1ff);
> }
> }
>
> @@ -1399,7 +1399,7 @@ static void vmsa_ttbcr_raw_write(CPUARMState *env,
> const ARMCPRegInfo *ri,
> * for long-descriptor tables the TTBCR fields are used differently
> * and the c2_mask and c2_base_mask values are meaningless.
> */
> - env->cp15.c2_control = value;
> + raw_write(env, ri, value);
> env->cp15.c2_mask = ~(((uint32_t)0xffffffffu) >> maskshift);
> env->cp15.c2_base_mask = ~((uint32_t)0x3fffu >> maskshift);
> }
> @@ -1421,7 +1421,7 @@ static void vmsa_ttbcr_write(CPUARMState *env, const
> ARMCPRegInfo *ri,
> static void vmsa_ttbcr_reset(CPUARMState *env, const ARMCPRegInfo *ri)
> {
> env->cp15.c2_base_mask = 0xffffc000u;
> - env->cp15.c2_control = 0;
> + raw_write(env, ri, 0);
> env->cp15.c2_mask = 0;
> }
>
> @@ -1432,7 +1432,7 @@ static void vmsa_tcr_el1_write(CPUARMState *env, const
> ARMCPRegInfo *ri,
>
> /* For AArch64 the A1 bit could result in a change of ASID, so TLB flush.
> */
> tlb_flush(CPU(cpu), 1);
> - env->cp15.c2_control = value;
> + raw_write(env, ri, value);
> }
>
> static void vmsa_ttbr_write(CPUARMState *env, const ARMCPRegInfo *ri,
> @@ -2081,14 +2081,14 @@ static void sctlr_write(CPUARMState *env, const
> ARMCPRegInfo *ri,
> {
> ARMCPU *cpu = arm_env_get_cpu(env);
>
> - if (env->cp15.c1_sys == value) {
> + if (raw_read(env, ri) == value) {
> /* Skip the TLB flush if nothing actually changed; Linux likes
> * to do a lot of pointless SCTLR writes.
> */
> return;
> }
>
> - env->cp15.c1_sys = value;
> + raw_write(env, ri, value);
> /* ??? Lots of these bits are not implemented. */
> /* This may enable/disable the MMU, so do a TLB flush. */
> tlb_flush(CPU(cpu), 1);
> --
> 1.8.3.2
>
>
>