[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 4/5] qcow1: Validate image size (CVE-2014-022
From: |
Benoît Canet |
Subject: |
Re: [Qemu-devel] [PATCH v2 4/5] qcow1: Validate image size (CVE-2014-0223) |
Date: |
Fri, 16 May 2014 13:22:47 +0200 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
The Friday 16 May 2014 à 12:47:56 (+0200), Kevin Wolf wrote :
> Am 15.05.2014 um 18:35 hat Benoît Canet geschrieben:
> > The Thursday 15 May 2014 à 16:21:56 (+0200), Kevin Wolf wrote :
> > > A huge image size could cause s->l1_size to overflow. Make sure that
> > > images never require a L1 table larger than what fits in s->l1_size.
> > >
> > > This cannot only cause unbounded allocations, but also the allocation of
> > > a too small L1 table, resulting in out-of-bounds array accesses (both
> > > reads and writes).
> > >
> > > Cc: address@hidden
> > > Signed-off-by: Kevin Wolf <address@hidden>
> > > ---
> > > block/qcow.c | 16 ++++++++++++++--
> > > tests/qemu-iotests/092 | 9 +++++++++
> > > tests/qemu-iotests/092.out | 7 +++++++
> > > 3 files changed, 30 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/block/qcow.c b/block/qcow.c
> > > index e8038e5..3566c05 100644
> > > --- a/block/qcow.c
> > > +++ b/block/qcow.c
> > > @@ -61,7 +61,7 @@ typedef struct BDRVQcowState {
> > > int cluster_sectors;
> > > int l2_bits;
> > > int l2_size;
> > > - int l1_size;
> > > + unsigned int l1_size;
> > > uint64_t cluster_offset_mask;
> > > uint64_t l1_table_offset;
> > > uint64_t *l1_table;
> > > @@ -166,7 +166,19 @@ static int qcow_open(BlockDriverState *bs, QDict
> > > *options, int flags,
> > >
> > > /* read the level 1 table */
> > > shift = s->cluster_bits + s->l2_bits;
> > > - s->l1_size = (header.size + (1LL << shift) - 1) >> shift;
> > > + if (header.size > UINT64_MAX - (1LL << shift)) {
> > > + error_setg(errp, "Image too large");
> > > + ret = -EINVAL;
> > > + goto fail;
> > > + } else {
> > > + uint64_t l1_size = (header.size + (1LL << shift) - 1) >> shift;
> > > + if (l1_size > INT_MAX / sizeof(uint64_t)) {
> > > + error_setg(errp, "Image too large");
> > > + ret = -EINVAL;
> > > + goto fail;
> > > + }
> > > + s->l1_size = l1_size;
> > > + }
> > >
> > > s->l1_table_offset = header.l1_table_offset;
> > > s->l1_table = g_malloc(s->l1_size * sizeof(uint64_t));
> > > diff --git a/tests/qemu-iotests/092 b/tests/qemu-iotests/092
> > > index fb8bacc..ae6ca76 100755
> > > --- a/tests/qemu-iotests/092
> > > +++ b/tests/qemu-iotests/092
> > > @@ -43,6 +43,7 @@ _supported_fmt qcow
> > > _supported_proto generic
> > > _supported_os Linux
> > >
> > > +offset_size=24
> > > offset_cluster_bits=32
> > > offset_l2_bits=33
> > >
> > > @@ -72,6 +73,14 @@ poke_file "$TEST_IMG" "$offset_l2_bits" "\x0e"
> > > poke_file "$TEST_IMG" "$offset_l2_bits" "\x1b"
> > > { $QEMU_IO -c "read 0 512" $TEST_IMG; } 2>&1 | _filter_qemu_io |
> > > _filter_testdir
> > >
> > > +echo
> > > +echo "== Invalid size =="
> > > +_make_test_img 64M
> > > +poke_file "$TEST_IMG" "$offset_size" "\xee\xee\xee\xee\xee\xee\xee\xee"
> > > +{ $QEMU_IO -c "read 0 512" $TEST_IMG; } 2>&1 | _filter_qemu_io |
> > > _filter_testdir
> > > +poke_file "$TEST_IMG" "$offset_size" "\x7f\xff\xff\xff\xff\xff\xff\xff"
> > > +{ $QEMU_IO -c "write 0 64M" $TEST_IMG; } 2>&1 | _filter_qemu_io |
> > > _filter_testdir
> > > +
> > > # success, all done
> > > echo "*** done"
> > > rm -f $seq.full
> > > diff --git a/tests/qemu-iotests/092.out b/tests/qemu-iotests/092.out
> > > index 73918b3..ac03302 100644
> > > --- a/tests/qemu-iotests/092.out
> > > +++ b/tests/qemu-iotests/092.out
> > > @@ -21,4 +21,11 @@ qemu-io: can't open device TEST_DIR/t.qcow: L2 table
> > > size must be between 512 an
> > > no file open, try 'help open'
> > > qemu-io: can't open device TEST_DIR/t.qcow: L2 table size must be
> > > between 512 and 64k
> > > no file open, try 'help open'
> > > +
> > > +== Invalid size ==
> > > +Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
> > > +qemu-io: can't open device TEST_DIR/t.qcow: Image too large
> > > +no file open, try 'help open'
> > > +qemu-io: can't open device TEST_DIR/t.qcow: Image too large
> > > +no file open, try 'help open'
> > > *** done
> > > --
> > > 1.8.3.1
> > >
> >
> > I still not understand this one :)
>
> I know, and I'm sorry about that, but I can't explain better than I did.
>
> Last attempt: There is this code line in the original source:
>
> s->l1_size = (header.size + (1LL << shift) - 1) >> shift;
>
> There are two different integer overflows that can happen in this line.
> header.size + (1LL << shift) could exceed UINT64_MAX (header.size is
> uint64_t), and the whole calculation could exceed INT_MAX (s->l1_size is
> int).
>
> My patch checks for these two conditions and leaves everything else as
> it is. It has nothing to do with any L2 table sizes or anything.
I understand now.
Thanks.
Best regards
Benoît
>
> Kevin
- Re: [Qemu-devel] [PATCH v2 1/5] qcow1: Make padding in the header explicit, (continued)
[Qemu-devel] [PATCH v2 2/5] qcow1: Check maximum cluster size, Kevin Wolf, 2014/05/15
[Qemu-devel] [PATCH v2 3/5] qcow1: Validate L2 table size (CVE-2014-0222), Kevin Wolf, 2014/05/15
[Qemu-devel] [PATCH v2 4/5] qcow1: Validate image size (CVE-2014-0223), Kevin Wolf, 2014/05/15
[Qemu-devel] [PATCH v2 5/5] qcow1: Stricter backing file length check, Kevin Wolf, 2014/05/15