|
From: | Muhammad Irshad |
Subject: | Re: [Qemu-devel] Qemu-devel Digest, Vol 133, Issue 739 |
Date: | Sat, 26 Apr 2014 17:13:06 -0400 |
Send Qemu-devel mailing list submissions to
address@hidden
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.nongnu.org/mailman/listinfo/qemu-devel
or, via email, send a message with subject or body 'help' to
address@hidden
You can reach the person managing the list at
address@hidden
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Qemu-devel digest..."
Today's Topics:
1. Re: [PATCH v2] usb-ohci: Add vmstate descriptor
(Alexey Kardashevskiy)
----------------------------------------------------------------------
Message: 1
Date: Sat, 26 Apr 2014 23:02:47 +1000
From: Alexey Kardashevskiy <address@hidden>
To: address@hidden
Cc: Peter Maydell <address@hidden>, Gerd Hoffmann
<address@hidden>
Subject: Re: [Qemu-devel] [PATCH v2] usb-ohci: Add vmstate descriptor
Message-ID: <address@hidden>
Content-Type: text/plain; charset=KOI8-R
On 04/13/2014 08:42 PM, Alexey Kardashevskiy wrote:
> This adds migration support for OHCI.
>
> This defines a descriptor for OHCIState.
> This changes some OHCIState field types to be migration compatible.
> This adds a descriptor for OHCIPort.
> This migrates the EOF timer if the USB was started at the time of
> migration.
>
> Cc: Gerd Hoffmann <address@hidden>
> Cc: Peter Maydell <address@hidden>
> Signed-off-by: Alexey Kardashevskiy <address@hidden>
Ping, anyone, please? Is it bad/good/ugly? Thanks.
> ---
> Changes:
> v2:
> * added OHCIState migration (previously only PCI state was migrated).
>
> To test this patch, the guest booted from USB disk on a OHCI bus was
> migrated from one physical host to another (with another patch to
> correctly migrate timebase on POWERPC). The disk image was on
> an NFS share. The guest was executing "fdisk -l" in a loop. Without
> the patch, this was happening (other disk-related commands failed too):
> address@hidden ~]# fdisk -l
> usb-ohci: HCCA read error at 0
> ohci_die: DMA error
>
> This is the QEMU command line from the test:
> /home/aik/qemu-system-ppc64 \
> -enable-kvm \
> -m 1024 \
> -machine pseries \
> -nographic \
> -vga none \
> -device pci-ohci,id=id0 \
> -drive id=id1,if=none,readonly=off,werror=stop,rerror=stop,\
> discard=on,file=ka1/fc19_16GB.qcow2,format=qcow2 \
> -device usb-storage,id=id2,drive=id1 \
>
>
>
> As I am lacking knowledge of USB, please comment, especially the EOF timer part.
> Thanks!
>
>
> ---
> hw/usb/hcd-ohci.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 111 insertions(+), 8 deletions(-)
>
> diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c
> index 93f186f..cd87074 100644
> --- a/hw/usb/hcd-ohci.c
> +++ b/hw/usb/hcd-ohci.c
> @@ -80,13 +80,13 @@ typedef struct {
> uint32_t bulk_head, bulk_cur;
> uint32_t per_cur;
> uint32_t done;
> - int done_count;
> + int32_t done_count;
>
> /* Frame counter partition */
> - uint32_t fsmps:15;
> - uint32_t fit:1;
> - uint32_t fi:14;
> - uint32_t frt:1;
> + uint16_t fsmps;
> + uint8_t fit;
> + uint16_t fi;
> + uint8_t frt;
> uint16_t frame_number;
> uint16_t padding;
> uint32_t pstart;
> @@ -111,7 +111,7 @@ typedef struct {
> USBPacket usb_packet;
> uint8_t usb_buf[8192];
> uint32_t async_td;
> - int async_complete;
> + bool async_complete;
>
> } OHCIState;
>
> @@ -693,7 +693,7 @@ static void ohci_async_complete_packet(USBPort *port, USBPacket *packet)
> #ifdef DEBUG_PACKET
> DPRINTF("Async packet complete\n");
> #endif
> - ohci->async_complete = 1;
> + ohci->async_complete = true;
> ohci_process_lists(ohci, 1);
> }
>
> @@ -1058,7 +1058,7 @@ static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed)
> #endif
> if (completion) {
> ohci->async_td = 0;
> - ohci->async_complete = 0;
> + ohci->async_complete = false;
> } else {
> if (ohci->async_td) {
> /* ??? The hardware should allow one active packet per
> @@ -1984,6 +1984,108 @@ static Property ohci_pci_properties[] = {
> DEFINE_PROP_END_OF_LIST(),
> };
>
> +static const VMStateDescription vmstate_ohci_state_port = {
> + .name = "ohci-core/port",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .minimum_version_id_old = 1,
> + .fields = (VMStateField []) {
> + VMSTATE_UINT32(ctrl, OHCIPort),
> + VMSTATE_END_OF_LIST()
> + },
> +};
> +
> +static bool ohci_eof_timer_needed(void *opaque)
> +{
> + OHCIState *ohci = opaque;
> +
> + return ohci->eof_timer != NULL;
> +}
> +
> +static int ohci_eof_timer_pre_load(void *opaque)
> +{
> + OHCIState *ohci = opaque;
> +
> + ohci_bus_start(ohci);
> +
> + return 0;
> +}
> +
> +static const VMStateDescription vmstate_ohci_eof_timer = {
> + .name = "ohci-core/eof-timer",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .minimum_version_id_old = 1,
> + .pre_load = ohci_eof_timer_pre_load,
> + .fields = (VMStateField []) {
> + VMSTATE_TIMER(eof_timer, OHCIState),
> + VMSTATE_END_OF_LIST()
> + },
> +};
> +
> +const VMStateDescription vmstate_ohci_state = {
> + .name = "ohci-core",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_INT64(sof_time, OHCIState),
> + VMSTATE_UINT32(ctl, OHCIState),
> + VMSTATE_UINT32(status, OHCIState),
> + VMSTATE_UINT32(intr_status, OHCIState),
> + VMSTATE_UINT32(intr, OHCIState),
> + VMSTATE_UINT32(hcca, OHCIState),
> + VMSTATE_UINT32(ctrl_head, OHCIState),
> + VMSTATE_UINT32(ctrl_cur, OHCIState),
> + VMSTATE_UINT32(bulk_head, OHCIState),
> + VMSTATE_UINT32(bulk_cur, OHCIState),
> + VMSTATE_UINT32(per_cur, OHCIState),
> + VMSTATE_UINT32(done, OHCIState),
> + VMSTATE_INT32(done_count, OHCIState),
> + VMSTATE_UINT16(fsmps, OHCIState),
> + VMSTATE_UINT8(fit, OHCIState),
> + VMSTATE_UINT16(fi, OHCIState),
> + VMSTATE_UINT8(frt, OHCIState),
> + VMSTATE_UINT16(frame_number, OHCIState),
> + VMSTATE_UINT16(padding, OHCIState),
> + VMSTATE_UINT32(pstart, OHCIState),
> + VMSTATE_UINT32(lst, OHCIState),
> + VMSTATE_UINT32(rhdesc_a, OHCIState),
> + VMSTATE_UINT32(rhdesc_b, OHCIState),
> + VMSTATE_UINT32(rhstatus, OHCIState),
> + VMSTATE_STRUCT_ARRAY(rhport, OHCIState, OHCI_MAX_PORTS, 0,
> + vmstate_ohci_state_port, OHCIPort),
> + VMSTATE_UINT32(hstatus, OHCIState),
> + VMSTATE_UINT32(hmask, OHCIState),
> + VMSTATE_UINT32(hreset, OHCIState),
> + VMSTATE_UINT32(htest, OHCIState),
> + VMSTATE_UINT32(old_ctl, OHCIState),
> + VMSTATE_UINT8_ARRAY(usb_buf, OHCIState, 8192),
> + VMSTATE_UINT32(async_td, OHCIState),
> + VMSTATE_BOOL(async_complete, OHCIState),
> + VMSTATE_END_OF_LIST()
> + },
> + .subsections = (VMStateSubsection []) {
> + {
> + .vmsd = &vmstate_ohci_eof_timer,
> + .needed = ohci_eof_timer_needed,
> + } , {
> + /* empty */
> + }
> + }
> +};
> +
> +static const VMStateDescription vmstate_ohci = {
> + .name = "ohci",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .minimum_version_id_old = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_PCI_DEVICE(parent_obj, OHCIPCIState),
> + VMSTATE_STRUCT(state, OHCIPCIState, 1, vmstate_ohci_state, OHCIState),
> + VMSTATE_END_OF_LIST()
> + }
> +};
> +
> static void ohci_pci_class_init(ObjectClass *klass, void *data)
> {
> DeviceClass *dc = DEVICE_CLASS(klass);
> @@ -1997,6 +2099,7 @@ static void ohci_pci_class_init(ObjectClass *klass, void *data)
> dc->desc = "Apple USB Controller";
> dc->props = ohci_pci_properties;
> dc->hotpluggable = false;
> + dc->vmsd = &vmstate_ohci;
> }
>
> static const TypeInfo ohci_pci_info = {
>
--
Alexey
------------------------------
_______________________________________________
Qemu-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/qemu-devel
End of Qemu-devel Digest, Vol 133, Issue 739
********************************************
[Prev in Thread] | Current Thread | [Next in Thread] |