[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT |
Date: |
Mon, 16 Dec 2013 21:30:14 +0200 |
On Fri, Dec 13, 2013 at 05:22:14PM +0100, Igor Mammedov wrote:
> .. and report range used by it to OSPM via _CRS.
> PRST is needed in SSDT since its base will depend on
> chipset and will be dynamically set by QEMU.
> Also move PRSC() method along with PRST since cross
> table reference to PRST doesn't work.
Could you clarify this last sentence?
I don't mind where it is but I'd like to know
where does the limitation come from.
>
> Signed-off-by: Igor Mammedov <address@hidden>
> ---
> hw/i386/acpi-dsdt-cpu-hotplug.dsl | 39 +----------------------
> hw/i386/acpi-dsdt.dsl | 2 +-
> hw/i386/q35-acpi-dsdt.dsl | 2 +-
> hw/i386/ssdt-misc.dsl | 65
> +++++++++++++++++++++++++++++++++++++++
> 4 files changed, 68 insertions(+), 40 deletions(-)
>
> diff --git a/hw/i386/acpi-dsdt-cpu-hotplug.dsl
> b/hw/i386/acpi-dsdt-cpu-hotplug.dsl
> index 995b415..f26f81b 100644
> --- a/hw/i386/acpi-dsdt-cpu-hotplug.dsl
> +++ b/hw/i386/acpi-dsdt-cpu-hotplug.dsl
> @@ -20,6 +20,7 @@
> Scope(\_SB) {
> /* Objects filled in by run-time generated SSDT */
> External(NTFY, MethodObj)
> + External(\_SB.CPHD.PRSC, MethodObj)
> External(CPON, PkgObj)
>
> /* Methods called by run-time generated SSDT Processor objects */
> @@ -51,42 +52,4 @@ Scope(\_SB) {
> // _EJ0 method - eject callback
> Sleep(200)
> }
> -
> - OperationRegion(PRST, SystemIO, 0xaf00, 32)
> - Field(PRST, ByteAcc, NoLock, Preserve) {
> - PRS, 256
> - }
> - Method(PRSC, 0) {
> - // Local5 = active cpu bitmap
> - Store(PRS, Local5)
> - // Local2 = last read byte from bitmap
> - Store(Zero, Local2)
> - // Local0 = Processor ID / APIC ID iterator
> - Store(Zero, Local0)
> - While (LLess(Local0, SizeOf(CPON))) {
> - // Local1 = CPON flag for this cpu
> - Store(DerefOf(Index(CPON, Local0)), Local1)
> - If (And(Local0, 0x07)) {
> - // Shift down previously read bitmap byte
> - ShiftRight(Local2, 1, Local2)
> - } Else {
> - // Read next byte from cpu bitmap
> - Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2)
> - }
> - // Local3 = active state for this cpu
> - Store(And(Local2, 1), Local3)
> -
> - If (LNotEqual(Local1, Local3)) {
> - // State change - update CPON with new state
> - Store(Local3, Index(CPON, Local0))
> - // Do CPU notify
> - If (LEqual(Local3, 1)) {
> - NTFY(Local0, 1)
> - } Else {
> - NTFY(Local0, 3)
> - }
> - }
> - Increment(Local0)
> - }
> - }
> }
> diff --git a/hw/i386/acpi-dsdt.dsl b/hw/i386/acpi-dsdt.dsl
> index 90efce0..fa9f2d4 100644
> --- a/hw/i386/acpi-dsdt.dsl
> +++ b/hw/i386/acpi-dsdt.dsl
> @@ -311,7 +311,7 @@ DefinitionBlock (
> }
> Method(_E02) {
> // CPU hotplug event
> - \_SB.PRSC()
> + \_SB.CPHD.PRSC()
> }
> Method(_L03) {
> }
> diff --git a/hw/i386/q35-acpi-dsdt.dsl b/hw/i386/q35-acpi-dsdt.dsl
> index 22baa58..9ccc543 100644
> --- a/hw/i386/q35-acpi-dsdt.dsl
> +++ b/hw/i386/q35-acpi-dsdt.dsl
> @@ -420,7 +420,7 @@ DefinitionBlock (
> }
> Method(_E02) {
> // CPU hotplug event
> - \_SB.PRSC()
> + \_SB.CPHD.PRSC()
> }
> Method(_L03) {
> }
> diff --git a/hw/i386/ssdt-misc.dsl b/hw/i386/ssdt-misc.dsl
> index a4484b8..ec8893c 100644
> --- a/hw/i386/ssdt-misc.dsl
> +++ b/hw/i386/ssdt-misc.dsl
> @@ -116,4 +116,69 @@ DefinitionBlock ("ssdt-misc.aml", "SSDT", 0x01, "BXPC",
> "BXSSDTSUSP", 0x1)
> }
> }
> }
> + Scope(\_SB) {
> + External(NTFY, MethodObj)
> + External(CPON, PkgObj)
> +
> + Device(CPHD) {
> + Name(_HID, EISAID("PNP0C08"))
> + Name(CPPL, 32) // cpu-gpe length
> + Name(CPHP, 0xaf00)
> +
> + OperationRegion(PRST, SystemIO, CPHP, CPPL)
> + Field(PRST, ByteAcc, NoLock, Preserve) {
> + PRS, 256
> + }
> +
> + Method(PRSC, 0) {
> + // Local5 = active cpu bitmap
> + Store(PRS, Local5)
> + // Local2 = last read byte from bitmap
> + Store(Zero, Local2)
> + // Local0 = Processor ID / APIC ID iterator
> + Store(Zero, Local0)
> + While (LLess(Local0, SizeOf(CPON))) {
> + // Local1 = CPON flag for this cpu
> + Store(DerefOf(Index(CPON, Local0)), Local1)
> + If (And(Local0, 0x07)) {
> + // Shift down previously read bitmap byte
> + ShiftRight(Local2, 1, Local2)
> + } Else {
> + // Read next byte from cpu bitmap
> + Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))),
> Local2)
> + }
> + // Local3 = active state for this cpu
> + Store(And(Local2, 1), Local3)
> +
> + If (LNotEqual(Local1, Local3)) {
> + // State change - update CPON with new state
> + Store(Local3, Index(CPON, Local0))
> + // Do CPU notify
> + If (LEqual(Local3, 1)) {
> + NTFY(Local0, 1)
> + } Else {
> + NTFY(Local0, 3)
> + }
> + }
> + Increment(Local0)
> + }
> + }
> +
> + /* Leave bit 0 cleared to avoid Windows BSOD */
> + Name(_STA, 0xA)
> +
> + Method(_CRS, 0) {
> + Store(ResourceTemplate() {
> + IO(Decode16, 0x00, 0x00, 0x01, 0x15, IO)
> + }, Local0)
> +
> + CreateWordField(Local0, IO._MIN, IOMN)
> + CreateWordField(Local0, IO._MAX, IOMX)
> +
> + Store(CPHP, IOMN)
> + Subtract(Add(CPHP, CPPL), 1, IOMX)
> + Return(Local0)
> + }
> + } // Device(CPHD)
> + } // Scope(\_SB)
> }
> --
> 1.8.3.1
- [Qemu-devel] [PATCH 00/11] pc: CPU hotplug support for Q35, Igor Mammedov, 2013/12/13
- [Qemu-devel] [PATCH 01/11] acpi: piix4: remove not needed GPE0 mask, Igor Mammedov, 2013/12/13
- [Qemu-devel] [PATCH 04/11] acpi/piix4: add readonly "cpu-hotplug-io-base" property, Igor Mammedov, 2013/12/13
- [Qemu-devel] [PATCH 06/11] acpi/ich9: add CPU hotplug handling to Q35 machine, Igor Mammedov, 2013/12/13
- [Qemu-devel] [PATCH 08/11] ACPI/DSDT-CPU: cleanup bogus comment, Igor Mammedov, 2013/12/13
- [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Igor Mammedov, 2013/12/13
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT,
Michael S. Tsirkin <=
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Igor Mammedov, 2013/12/16
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Laszlo Ersek, 2013/12/16
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Laszlo Ersek, 2013/12/16
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Igor Mammedov, 2013/12/16
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Michael S. Tsirkin, 2013/12/17
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Laszlo Ersek, 2013/12/16
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Igor Mammedov, 2013/12/16
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Laszlo Ersek, 2013/12/16
- Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Igor Mammedov, 2013/12/16
Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT, Michael S. Tsirkin, 2013/12/16