qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 06/14] spapr_pci: populate DRC dt entries for PHBs


From: Michael Roth
Subject: [Qemu-devel] [PATCH 06/14] spapr_pci: populate DRC dt entries for PHBs
Date: Wed, 4 Dec 2013 19:19:46 -0600

Reserve 32 entries of type PCI in each PHB's initial FDT. This
advertises to guests that each PHB is DR-capable device with
physical hotpluggable slots. This is necessary for allowing
hotplugging of devices to it later via bus rescan or guest rpaphp
hotplug module.

Each entry is assigned a name of "Slot <<bus_idx>*32 +1>",
advertised as a hotpluggable PCI slot, and assigned to power domain
-1 to indicate to the guest that power management is handled by the
hardware.

This models a DR-capable PCI expansion device attached to a host/lpar
via a single PHB with 32 physical hotpluggable slots (as opposed to a
virtual bridge device with external management console). Hotplug will
be handled by the guest via bus rescan or the rpaphp hotplug module.

Signed-off-by: Michael Roth <address@hidden>
---
 hw/ppc/spapr.c              |    3 +-
 hw/ppc/spapr_pci.c          |  101 +++++++++++++++++++++++++++++++++++++++++++
 include/hw/pci-host/spapr.h |    1 +
 3 files changed, 104 insertions(+), 1 deletion(-)

diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index ec3ba43..0607559 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -739,7 +739,8 @@ static void spapr_finalize_fdt(sPAPREnvironment *spapr,
     QLIST_FOREACH(phb, &spapr->phbs, list) {
         drc_entry = spapr_add_phb_to_drc_table(phb->buid, 2 /* Unusable */);
         g_assert(drc_entry);
-        ret = spapr_populate_pci_dt(phb, PHANDLE_XICP, fdt);
+        ret = spapr_populate_pci_dt(phb, PHANDLE_XICP, drc_entry->drc_index,
+                                    fdt);
     }
 
     if (ret < 0) {
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 5eb6852..4a88212 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1041,8 +1041,103 @@ PCIHostState *spapr_create_phb(sPAPREnvironment *spapr, 
int index)
 #define b_fff(x)        b_x((x), 8, 3)  /* function number */
 #define b_rrrrrrrr(x)   b_x((x), 0, 8)  /* register number */
 
+static void spapr_create_drc_phb_dt_entries(void *fdt, int bus_off, int 
phb_index)
+{
+    char char_buf[1024];
+    uint32_t int_buf[SPAPR_DRC_PHB_SLOT_MAX + 1];
+    uint32_t *entries;
+    int i, ret, offset;
+
+    /* ibm,drc-indexes */
+    memset(int_buf, 0 , sizeof(int_buf));
+    int_buf[0] = SPAPR_DRC_PHB_SLOT_MAX;
+
+    for (i = 1; i <= SPAPR_DRC_PHB_SLOT_MAX; i++) {
+        int_buf[i] = SPAPR_DRC_DEV_ID_BASE + (phb_index << 8) + ((i - 1) << 3);
+    }
+
+    ret = fdt_setprop(fdt, bus_off, "ibm,drc-indexes", int_buf,
+                      sizeof(int_buf));
+    if (ret) {
+        g_warning("error adding 'ibm,drc-indexes' field for PHB FDT");
+    }
+
+    /* ibm,drc-power-domains */
+    memset(int_buf, 0, sizeof(int_buf));
+    int_buf[0] = SPAPR_DRC_PHB_SLOT_MAX;
+
+    for (i = 1; i <= SPAPR_DRC_PHB_SLOT_MAX; i++) {
+        int_buf[i] = 0xffffffff;
+    }
+
+    ret = fdt_setprop(fdt, bus_off, "ibm,drc-power-domains", int_buf,
+                      sizeof(int_buf));
+    if (ret) {
+        g_warning("error adding 'ibm,drc-power-domains' field for PHB FDT");
+    }
+
+    /* ibm,drc-names */
+    memset(char_buf, 0, sizeof(char_buf));
+    entries = (uint32_t *)&char_buf[0];
+    *entries = SPAPR_DRC_PHB_SLOT_MAX;
+    offset = sizeof(*entries);
+
+    for (i = 1; i <= SPAPR_DRC_PHB_SLOT_MAX; i++) {
+        offset += sprintf(char_buf + offset, "Slot %d",
+                          (phb_index * SPAPR_DRC_PHB_SLOT_MAX) + i - 1);
+        char_buf[offset++] = '\0';
+    }
+
+    ret = fdt_setprop(fdt, bus_off, "ibm,drc-names", char_buf, offset);
+    if (ret) {
+        g_warning("error adding 'ibm,drc-names' field for PHB FDT");
+    }
+
+    /* ibm,drc-types */
+    memset(char_buf, 0, sizeof(char_buf));
+    entries = (uint32_t *)&char_buf[0];
+    *entries = SPAPR_DRC_PHB_SLOT_MAX;
+    offset = sizeof(*entries);
+
+    for (i = 0; i < SPAPR_DRC_PHB_SLOT_MAX; i++) {
+        offset += sprintf(char_buf + offset, "28");
+        char_buf[offset++] = '\0';
+    }
+
+    ret = fdt_setprop(fdt, bus_off, "ibm,drc-types", char_buf, offset);
+    if (ret) {
+        g_warning("error adding 'ibm,drc-types' field for PHB FDT");
+    }
+
+    /* we want the initial indicator state to be 0 - "empty", when we
+     * hot-plug an adaptor in the slot, we need to set the indicator
+     * to 1 - "present."
+     */
+
+    /* ibm,indicator-9003 */
+    memset(int_buf, 0, sizeof(int_buf));
+    int_buf[0] = SPAPR_DRC_PHB_SLOT_MAX;
+
+    ret = fdt_setprop(fdt, bus_off, "ibm,indicator-9003", int_buf,
+                      sizeof(int_buf));
+    if (ret) {
+        g_warning("error adding 'ibm,indicator-9003' field for PHB FDT");
+    }
+
+    /* ibm,sensor-9003 */
+    memset(int_buf, 0, sizeof(int_buf));
+    int_buf[0] = SPAPR_DRC_PHB_SLOT_MAX;
+
+    ret = fdt_setprop(fdt, bus_off, "ibm,sensor-9003", int_buf,
+                      sizeof(int_buf));
+    if (ret) {
+        g_warning("error adding 'ibm,sensor-9003' field for PHB FDT");
+    }
+}
+
 int spapr_populate_pci_dt(sPAPRPHBState *phb,
                           uint32_t xics_phandle,
+                          uint32_t drc_index,
                           void *fdt)
 {
     int bus_off, i, j;
@@ -1124,6 +1219,12 @@ int spapr_populate_pci_dt(sPAPRPHBState *phb,
                  phb->dma_liobn, phb->dma_window_start,
                  phb->dma_window_size);
 
+    spapr_create_drc_phb_dt_entries(fdt, bus_off, phb->index);
+    if (drc_index) {
+        _FDT(fdt_setprop(fdt, bus_off, "ibm,my-drc-index", &drc_index,
+                         sizeof(drc_index)));
+    }
+
     return 0;
 }
 
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index 970b4a9..43d19a5 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -86,6 +86,7 @@ PCIHostState *spapr_create_phb(sPAPREnvironment *spapr, int 
index);
 
 int spapr_populate_pci_dt(sPAPRPHBState *phb,
                           uint32_t xics_phandle,
+                          uint32_t drc_index,
                           void *fdt);
 
 void spapr_pci_msi_init(sPAPREnvironment *spapr, hwaddr addr);
-- 
1.7.9.5




reply via email to

[Prev in Thread] Current Thread [Next in Thread]