[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addres
From: |
Marcel Apfelbaum |
Subject: |
Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addresses |
Date: |
Mon, 09 Sep 2013 17:10:50 +0300 |
On Mon, 2013-09-09 at 16:58 +0300, Michael S. Tsirkin wrote:
> On Mon, Sep 09, 2013 at 03:43:49PM +0300, Marcel Apfelbaum wrote:
> > On Mon, 2013-09-09 at 15:23 +0300, Michael S. Tsirkin wrote:
> > > On Mon, Sep 09, 2013 at 03:11:55PM +0300, Marcel Apfelbaum wrote:
> > > > On Mon, 2013-09-09 at 14:40 +0300, Michael S. Tsirkin wrote:
> > > > > On Mon, Sep 09, 2013 at 02:11:54PM +0300, Marcel Apfelbaum wrote:
> > > > > > Created a MemoryRegion with negative priority that
> > > > > > spans over all the pci address space.
> > > > > > It "intercepts" the accesses to unassigned pci
> > > > > > address space and will follow the pci spec:
> > > > > > 1. returns -1 on read
> > > > > > 2. does nothing on write
> > > > > > 3. sets the RECEIVED MASTER ABORT bit in the STATUS register
> > > > > > of the device that initiated the transaction
> > > > > >
> > > > > > Note: This implementation assumes that all the reads/writes to
> > > > > > the pci address space are done by the cpu.
> > > > > >
> > > > > > Signed-off-by: Marcel Apfelbaum <address@hidden>
> > > > > > ---
> > > > > > Changes from v1:
> > > > > > - "pci-unassigned-mem" MemoryRegion resides now in PCIBus and not
> > > > > > on
> > > > > > various Host Bridges
> > > > > > - "pci-unassgined-mem" does not have a ".valid.accept" field and
> > > > > > implements read write methods
> > > > > >
> > > > > > hw/pci/pci.c | 46
> > > > > > ++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > include/hw/pci/pci_bus.h | 1 +
> > > > > > 2 files changed, 47 insertions(+)
> > > > > >
> > > > > > diff --git a/hw/pci/pci.c b/hw/pci/pci.c
> > > > > > index d00682e..b6a8026 100644
> > > > > > --- a/hw/pci/pci.c
> > > > > > +++ b/hw/pci/pci.c
> > > > > > @@ -283,6 +283,43 @@ const char *pci_root_bus_path(PCIDevice *dev)
> > > > > > return rootbus->qbus.name;
> > > > > > }
> > > > > >
> > > > > > +static void unassigned_mem_access(PCIBus *bus)
> > > > > > +{
> > > > > > + /* FIXME assumption: memory access to the pci address
> > > > > > + * space is always initiated by the host bridge
> > > > >
> > > > > /* Always
> > > > > * like
> > > > > * this
> > > > > */
> > > > >
> > > > > /* Not
> > > > > * like this */
> > > > OK
> > > >
> > > > >
> > > > > > + * (device 0 on the bus) */
> > > > >
> > > > > Can't we pass the master device in?
> > > > > We are still left with the assumption that
> > > > > there's a single master, but at least
> > > > > we get rid of the assumption that it's
> > > > > always device 0 function 0.
> > > > >
> > > > >
> > > > > > + PCIDevice *d = bus->devices[0];
> > > > > > + if (!d) {
> > > > > > + return;
> > > > > > + }
> > > > > > +
> > > > > > + pci_word_test_and_set_mask(d->config + PCI_STATUS,
> > > > > > + PCI_STATUS_REC_MASTER_ABORT);
> > > > >
> > > > > Probably should check and set secondary status for
> > > > > a bridge device.
> > > > I wanted to add the support for bridges later,
> > > > I am struggling with some issues with PCI bridges.
> > >
> > > Shouldn't be very different.
> > The current implementation uses only one MemoryRegion that spans
> > over all pci address space. It catches all the accesses both to
> > primary bus addresses (bus 0), or to the regions covered by the bridges.
>
> That's not what I see in code.
>
> pci_bridge_initfn creates address spaces for IO and memory.
> Bridge windows are aliases created by pci_bridge_init_alias.
> All they do is forward transactions to the secondary bus,
> so these address spaces represent secondary bus addressing.
>
> What did I miss?
I was referring to *my* implementation of "unassigned mem" region,
not to pci bridge's regions.
>
> > The callback ALWAYS receive a pointer to the primary bus.
> >
> > What would be a better approach?
> > 1. Remain with a single MemoryRegion and check if the address
> > belongs to a bridge address range and recursively travel
> > the bridges tree and update the registers
> > 2. Model a MemoryRegion for each bridge that represents
> > the address range behind the bridge (not existing today).
>
> I think this is exactly what address_space_XXX represent.
Today I see (using info mtree) under the bridge:
1. A container memory region for all the space 0 - 2^64
2. Regions for the devices under the bridge
I do not see a region corresponding with the bridge "memory region"
that would be forwarded to the secondary bus.
Thanks,
Marcel
>
> > Add a MemoryRegion child to catch accesses to unassigned
> > addresses behind the bridge, then recursively travel the
> > bridges to top and update the registers.
>
> This bit sounds right.
>
> >
> > >
> > > > >
> > > > > > +}
> > > > > > +
> > > > > > +static uint64_t unassigned_mem_read(void *opaque, hwaddr addr,
> > > > > > unsigned size)
> > > > > > +{
> > > > > > + PCIBus *bus = opaque;
> > > > > > + unassigned_mem_access(bus);
> > > > > > +
> > > > > > + return -1ULL;
> > > > > > +}
> > > > > > +
> > > > > > +static void unassigned_mem_write(void *opaque, hwaddr addr,
> > > > > > uint64_t val,
> > > > > > + unsigned size)
> > > > > > +{
> > > > > > + PCIBus *bus = opaque;
> > > > > > + unassigned_mem_access(bus);
> > > > > > +}
> > > > > > +
> > > > > > +static const MemoryRegionOps unassigned_mem_ops = {
> > > > > > + .read = unassigned_mem_read,
> > > > > > + .write = unassigned_mem_write,
> > > > > > + .endianness = DEVICE_NATIVE_ENDIAN,
> > > > > > +};
> > > > > > +
> > > > > > +#define UNASSIGNED_MEM_PRIORITY -1
> > > > > > +
> > > > > > static void pci_bus_init(PCIBus *bus, DeviceState *parent,
> > > > > > const char *name,
> > > > > > MemoryRegion *address_space_mem,
> > > > >
> > > > >
> > > > > I would rename "unassigned" to "pci_master_Abort_" everywhere.
> > > > Are you sure about the capital "A"?
> > >
> > > Ugh no, that's a typo.
> > >
> > > >
> > > > For the memory ops I suppose is OK, but the MemoryRegion name
> > > > I think it should remain "unassigned_mem"; it will be strange
> > > > to name it pci_master_Abort_mem.
> > >
> > > Why would it be strange?
> > 1. Because it states what happens when there is a an access to
> > unassigned memory and not that IS an unassigned memory.
> > 2. This name is already used for unassigned IO ports and
> > maybe is better to follow this convension
> > >
> > > > >
> > > > > Call things by what they do not how they are used.
> > > > >
> > > > > > @@ -294,6 +331,15 @@ static void pci_bus_init(PCIBus *bus,
> > > > > > DeviceState *parent,
> > > > > > bus->address_space_mem = address_space_mem;
> > > > > > bus->address_space_io = address_space_io;
> > > > > >
> > > > > > +
> > > > > > + memory_region_init_io(&bus->unassigned_mem, OBJECT(bus),
> > > > > > + &unassigned_mem_ops, bus,
> > > > > > "pci-unassigned",
> > > > > > +
> > > > > > memory_region_size(bus->address_space_mem));
> > > > > > + memory_region_add_subregion_overlap(bus->address_space_mem,
> > > > > > +
> > > > > > bus->address_space_mem->addr,
> > > > > > + &bus->unassigned_mem,
> > > > > > + UNASSIGNED_MEM_PRIORITY);
> > > > > > +
> > > > > > /* host bridge */
> > > > > > QLIST_INIT(&bus->child);
> > > > > >
> > > > >
> > > > > It seems safer to add an API for enabling this functionality.
> > > > > Something like
> > > > >
> > > > > pci_set_master_for_master_abort(PCIBus *, PCIDevice *);
> > > > I started to implement that way, but it would be strange (I think)
> > > > to see in the code the above method because almost all the pci devices
> > > > can be master devices.
> > >
> > > In theory yes in practice no one programs devices
> > > with addresses that trigger master abort.
> > >
> > > Addressing this theorectical issue would require
> > > memory ops to get the bus master pointer.
> > > When this happens the new API can go away,
> > > but we can do this gradually.
> > >
> > > > I selected an "implicit" implementation so for this reason exactly.
> > > > We do not really select a master, but a "master for writes/reads on
> > > > pci address space". Selecting device 0 on the bus automatically for
> > > > this makes more sense to me.
> > >
> > > No because you don't know that device 0 function 0 is the
> > > pci host bridge.
> > The scenario is covered only for the primary bus and not for buses
> > behind the PCI bridge (the later being handled differently.)
> > In this case, isn't the Host Bridge always device 00.0?
> > If not, can we find a way to scan all bus devices and find
> > the host bridge so we will not have to manually add it to each
> > host bridge?
> >
> > >
> > > And this won't work for bridges at all.
> > For bridges I follow a different path, please see above.
> >
> > Thanks!
> > Marcel
> >
> > >
> > > > What do you think?
> > > > Marcel
> > > >
> > > > >
> > > > >
> > > > > > diff --git a/include/hw/pci/pci_bus.h b/include/hw/pci/pci_bus.h
> > > > > > index 9df1788..4cc25a3 100644
> > > > > > --- a/include/hw/pci/pci_bus.h
> > > > > > +++ b/include/hw/pci/pci_bus.h
> > > > > > @@ -23,6 +23,7 @@ struct PCIBus {
> > > > > > PCIDevice *parent_dev;
> > > > > > MemoryRegion *address_space_mem;
> > > > > > MemoryRegion *address_space_io;
> > > > > > + MemoryRegion unassigned_mem;
> > > > > >
> > > > > > QLIST_HEAD(, PCIBus) child; /* this will be replaced by qdev
> > > > > > later */
> > > > > > QLIST_ENTRY(PCIBus) sibling;/* this will be replaced by qdev
> > > > > > later */
> > > > > > --
> > > > > > 1.8.3.1
> > > > >
> > > >
> >
- Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addresses, (continued)
- Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addresses, Michael S. Tsirkin, 2013/09/09
- Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addresses, Marcel Apfelbaum, 2013/09/09
- Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addresses, Peter Maydell, 2013/09/09
- Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addresses, Marcel Apfelbaum, 2013/09/09
- Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addresses, Michael S. Tsirkin, 2013/09/09
- Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addresses, Michael S. Tsirkin, 2013/09/09
- Re: [Qemu-devel] [PATCH RFC v2 2/2] hw/pci: handle unassigned pci addresses,
Marcel Apfelbaum <=