[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 09/14] i386: define pc guest info
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH v3 09/14] i386: define pc guest info |
Date: |
Sun, 28 Jul 2013 10:36:49 +0300 |
On Sun, Jul 28, 2013 at 02:41:51AM +0200, Andreas Färber wrote:
> Am 24.07.2013 18:02, schrieb Michael S. Tsirkin:
> > This defines a structure that will be used to fill in guest info table.
> > This structure will be filled in in follow-up patches, using QOM. Fill
> > in NUMA node info is not available in QOM so it is filled in directly.
> >
> > Signed-off-by: Michael S. Tsirkin <address@hidden>
> > Reviewed-by: Laszlo Ersek <address@hidden>
> > ---
> > hw/i386/pc.c | 33 +++++++++++++++++++++++++++++++++
> > include/hw/i386/pc.h | 31 +++++++++++++++++++++++++++++++
> > include/qemu/typedefs.h | 1 +
> > 3 files changed, 65 insertions(+)
> >
> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
> > index b0b98a8..b9b8f92 100644
> > --- a/hw/i386/pc.c
> > +++ b/hw/i386/pc.c
> > @@ -1017,6 +1017,27 @@ static void pc_fw_cfg_guest_info(PcGuestInfo
> > *guest_info)
> > fw_cfg_add_file(guest_info->fw_cfg, "etc/pci-info", info, sizeof
> > *info);
> > }
> >
> > +static void pc_set_cpu_guest_info(CPUState *cpu, void *arg)
> > +{
> > + PcGuestInfo *guest_info = arg;
> > + CPUClass *klass = CPU_GET_CLASS(cpu);
> > + uint64_t apic_id = klass->get_arch_id(cpu);
>
> Please use "cc" to avoid the dreaded "klass".
>
> > + int j;
> > +
> > + assert(apic_id <= MAX_CPUMASK_BITS);
> > + assert(apic_id < guest_info->apic_id_limit);
> > +
> > + set_bit(apic_id, guest_info->found_cpus);
> > +
> > + for (j = 0; j < guest_info->numa_nodes; j++) {
> > + assert(cpu->cpu_index < max_cpus);
> > + if (test_bit(cpu->cpu_index, node_cpumask[j])) {
> > + guest_info->node_cpu[apic_id] = cpu_to_le64(j);
> > + break;
> > + }
> > + }
> > +}
> > +
> > typedef struct PcGuestInfoState {
> > PcGuestInfo info;
> > Notifier machine_done;
> > @@ -1037,6 +1058,18 @@ PcGuestInfo *pc_guest_info_init(ram_addr_t
> > below_4g_mem_size,
> > PcGuestInfoState *guest_info_state = g_malloc0(sizeof
> > *guest_info_state);
> > PcGuestInfo *guest_info = &guest_info_state->info;
> >
> > + guest_info->ram_size = below_4g_mem_size + above_4g_mem_size;
> > + guest_info->apic_id_limit = pc_apic_id_limit(max_cpus);
> > + guest_info->apic_xrupt_override = kvm_allows_irq0_override();
> > + guest_info->numa_nodes = nb_numa_nodes;
> > + guest_info->node_mem = g_memdup(node_mem, guest_info->numa_nodes *
> > + sizeof *guest_info->node_mem);
> > + guest_info->node_cpu = g_malloc0(guest_info->apic_id_limit *
> > + sizeof *guest_info->node_cpu);
> > +
> > + memset(&guest_info->found_cpus, 0, sizeof guest_info->found_cpus);
> > + qemu_for_each_cpu(pc_set_cpu_guest_info, guest_info);
> > +
> > guest_info->pci_info.w32.end = IO_APIC_DEFAULT_ADDRESS;
> > if (sizeof(hwaddr) == 4) {
> > guest_info->pci_info.w64.begin = 0;
> > diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
> > index 7fb97b0..7c0bd50 100644
> > --- a/include/hw/i386/pc.h
> > +++ b/include/hw/i386/pc.h
> > @@ -9,6 +9,9 @@
> > #include "hw/i386/ioapic.h"
> >
> > #include "qemu/range.h"
> > +#include "qemu/bitmap.h"
> > +#include "sysemu/sysemu.h"
> > +#include "hw/pci/pci.h"
> >
> > /* PC-style peripherals (also used by other machines). */
> >
> > @@ -17,9 +20,37 @@ typedef struct PcPciInfo {
> > Range w64;
> > } PcPciInfo;
> >
> > +/* Matches the value hard-coded in BIOS */
> > +#define PC_GUEST_PORT_ACPI_PM_BASE 0xb000
> > +
> > +struct AcpiPmInfo {
> > + bool s3_disabled;
> > + bool s4_disabled;
> > + uint8_t s4_val;
> > + uint16_t sci_int;
> > + uint8_t acpi_enable_cmd;
> > + uint8_t acpi_disable_cmd;
> > + uint32_t gpe0_blk;
> > + uint32_t gpe0_blk_len;
> > +};
> > +
> > struct PcGuestInfo {
> > PcPciInfo pci_info;
>
> These capitalizations look weird. Can't we use at least PM rather than Pm?
>
> Andreas
I prefer making a first letter in each work upper case consistently but
I don't mind so much.
> > bool has_pci_info;
> > + hwaddr ram_size;
> > + unsigned apic_id_limit;
> > + bool apic_xrupt_override;
> > + bool has_hpet;
> > + uint64_t numa_nodes;
> > + uint64_t *node_mem;
> > + uint64_t *node_cpu;
> > + DECLARE_BITMAP(found_cpus, MAX_CPUMASK_BITS + 1);
> > + DECLARE_BITMAP(slot_hotplug_enable, PCI_SLOT_MAX);
> > + AcpiPmInfo pm;
> > + uint64_t mcfg_base;
> > + const unsigned char *dsdt_code;
> > + unsigned dsdt_size;
> > + uint16_t pvpanic_port;
> > FWCfgState *fw_cfg;
> > };
> >
> > diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
> > index ac9f8d4..cb66e19 100644
> > --- a/include/qemu/typedefs.h
> > +++ b/include/qemu/typedefs.h
> > @@ -65,5 +65,6 @@ typedef struct QEMUSGList QEMUSGList;
> > typedef struct SHPCDevice SHPCDevice;
> > typedef struct FWCfgState FWCfgState;
> > typedef struct PcGuestInfo PcGuestInfo;
> > +typedef struct AcpiPmInfo AcpiPmInfo;
> >
> > #endif /* QEMU_TYPEDEFS_H */
> >
>
>
> --
> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
- Re: [Qemu-devel] [PATCH v3 07/14] loader: support for unmapped ROM blobs, (continued)
- [Qemu-devel] [PATCH v3 05/14] loader: use file path size from fw_cfg.h, Michael S. Tsirkin, 2013/07/24
- [Qemu-devel] [PATCH v3 08/14] loader: allow adding ROMs in done callbacks, Michael S. Tsirkin, 2013/07/24
- [Qemu-devel] [PATCH v3 09/14] i386: define pc guest info, Michael S. Tsirkin, 2013/07/24
- [Qemu-devel] [PATCH v3 10/14] ich9: APIs for pc guest info, Michael S. Tsirkin, 2013/07/24
- [Qemu-devel] [PATCH v3 04/14] acpi: pre-compiled ASL files, Michael S. Tsirkin, 2013/07/24
- [Qemu-devel] [PATCH v3 12/14] pvpanic: add API to access io port, Michael S. Tsirkin, 2013/07/24