[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v3] e600 core for MPC86xx processors
From: |
Julio Guerra |
Subject: |
[Qemu-devel] [PATCH v3] e600 core for MPC86xx processors |
Date: |
Mon, 24 Jun 2013 23:15:54 +0200 |
MPC86xx processors are based on the e600 core, which is not the case
in qemu where it is based on the 7400 processor.
This patch creates the e600 core and instantiates the MPC86xx
processors based on it. Therefore, adding the high BATs, the SPRG
4..7 registers, which are e600-specific [1], and a HW MMU model (as 7400).
This allows to define the MPC8610 processor too.
Tested with a kernel using the HW TLB misses.
[1] http://cache.freescale.com/files/32bit/doc/ref_manual/E600CORERM.pdf
Signed-off-by: Julio Guerra <address@hidden>
---
target-ppc/cpu-models.c | 10 ++--
target-ppc/cpu-models.h | 4 +-
target-ppc/translate_init.c | 125 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 130 insertions(+), 9 deletions(-)
diff --git a/target-ppc/cpu-models.c b/target-ppc/cpu-models.c
index 17f56b7..8a2ab50 100644
--- a/target-ppc/cpu-models.c
+++ b/target-ppc/cpu-models.c
@@ -792,17 +792,15 @@
POWERPC_DEF_SVR("MPC8572E", "MPC8572E",
CPU_POWERPC_MPC8572E, POWERPC_SVR_8572E, e500v2)
/* e600 family */
- POWERPC_DEF("e600", CPU_POWERPC_e600, 7400,
+ POWERPC_DEF("e600", CPU_POWERPC_e600, e600,
"PowerPC e600 core")
/* PowerPC e600 microcontrollers */
-#if defined(TODO)
POWERPC_DEF_SVR("MPC8610", "MPC8610",
- CPU_POWERPC_MPC8610, POWERPC_SVR_8610, 7400)
-#endif
+ CPU_POWERPC_MPC8610, POWERPC_SVR_8610, e600)
POWERPC_DEF_SVR("MPC8641", "MPC8641",
- CPU_POWERPC_MPC8641, POWERPC_SVR_8641, 7400)
+ CPU_POWERPC_MPC8641, POWERPC_SVR_8641, e600)
POWERPC_DEF_SVR("MPC8641D", "MPC8641D",
- CPU_POWERPC_MPC8641D, POWERPC_SVR_8641D, 7400)
+ CPU_POWERPC_MPC8641D, POWERPC_SVR_8641D, e600)
/* 32 bits "classic" PowerPC */
/* PowerPC 6xx family */
POWERPC_DEF("601_v0", CPU_POWERPC_601_v0, 601,
diff --git a/target-ppc/cpu-models.h b/target-ppc/cpu-models.h
index a94f835..8ba96bb 100644
--- a/target-ppc/cpu-models.h
+++ b/target-ppc/cpu-models.h
@@ -731,9 +731,7 @@ enum {
POWERPC_SVR_8568E = 0x807D0011 | POWERPC_SVR_E500,
POWERPC_SVR_8572 = 0x80E00010 | POWERPC_SVR_E500,
POWERPC_SVR_8572E = 0x80E80010 | POWERPC_SVR_E500,
-#if 0
- POWERPC_SVR_8610 = xxx,
-#endif
+ POWERPC_SVR_8610 = 0x80A00011,
POWERPC_SVR_8641 = 0x80900021,
POWERPC_SVR_8641D = 0x80900121,
};
diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c
index 021a31e..371390b 100644
--- a/target-ppc/translate_init.c
+++ b/target-ppc/translate_init.c
@@ -6525,6 +6525,131 @@ POWERPC_FAMILY(7457)(ObjectClass *oc, void *data)
POWERPC_FLAG_BUS_CLK;
}
+static void init_proc_e600 (CPUPPCState *env)
+{
+ gen_spr_ne_601(env);
+ gen_spr_7xx(env);
+ /* Time base */
+ gen_tbl(env);
+ /* 74xx specific SPR */
+ gen_spr_74xx(env);
+ /* XXX : not implemented */
+ spr_register(env, SPR_UBAMR, "UBAMR",
+ &spr_read_ureg, SPR_NOACCESS,
+ &spr_read_ureg, SPR_NOACCESS,
+ 0x00000000);
+ /* XXX : not implemented */
+ spr_register(env, SPR_LDSTCR, "LDSTCR",
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_generic, &spr_write_generic,
+ 0x00000000);
+ /* XXX : not implemented */
+ spr_register(env, SPR_ICTRL, "ICTRL",
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_generic, &spr_write_generic,
+ 0x00000000);
+ /* XXX : not implemented */
+ spr_register(env, SPR_MSSSR0, "MSSSR0",
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_generic, &spr_write_generic,
+ 0x00000000);
+ /* XXX : not implemented */
+ spr_register(env, SPR_PMC5, "PMC5",
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_generic, &spr_write_generic,
+ 0x00000000);
+ /* XXX : not implemented */
+ spr_register(env, SPR_UPMC5, "UPMC5",
+ &spr_read_ureg, SPR_NOACCESS,
+ &spr_read_ureg, SPR_NOACCESS,
+ 0x00000000);
+ /* XXX : not implemented */
+ spr_register(env, SPR_PMC6, "PMC6",
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_generic, &spr_write_generic,
+ 0x00000000);
+ /* XXX : not implemented */
+ spr_register(env, SPR_UPMC6, "UPMC6",
+ &spr_read_ureg, SPR_NOACCESS,
+ &spr_read_ureg, SPR_NOACCESS,
+ 0x00000000);
+ /* SPRGs */
+ spr_register(env, SPR_SPRG4, "SPRG4",
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_generic, &spr_write_generic,
+ 0x00000000);
+ spr_register(env, SPR_USPRG4, "USPRG4",
+ &spr_read_ureg, SPR_NOACCESS,
+ &spr_read_ureg, SPR_NOACCESS,
+ 0x00000000);
+ spr_register(env, SPR_SPRG5, "SPRG5",
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_generic, &spr_write_generic,
+ 0x00000000);
+ spr_register(env, SPR_USPRG5, "USPRG5",
+ &spr_read_ureg, SPR_NOACCESS,
+ &spr_read_ureg, SPR_NOACCESS,
+ 0x00000000);
+ spr_register(env, SPR_SPRG6, "SPRG6",
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_generic, &spr_write_generic,
+ 0x00000000);
+ spr_register(env, SPR_USPRG6, "USPRG6",
+ &spr_read_ureg, SPR_NOACCESS,
+ &spr_read_ureg, SPR_NOACCESS,
+ 0x00000000);
+ spr_register(env, SPR_SPRG7, "SPRG7",
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_generic, &spr_write_generic,
+ 0x00000000);
+ spr_register(env, SPR_USPRG7, "USPRG7",
+ &spr_read_ureg, SPR_NOACCESS,
+ &spr_read_ureg, SPR_NOACCESS,
+ 0x00000000);
+ /* Memory management */
+ gen_low_BATs(env);
+ gen_high_BATs(env);
+ gen_74xx_soft_tlb(env, 128, 2);
+ init_excp_7450(env);
+ env->dcache_line_size = 32;
+ env->icache_line_size = 32;
+ /* Allocate hardware IRQ controller */
+ ppc6xx_irq_init(env);
+}
+
+POWERPC_FAMILY(e600)(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PowerPCCPUClass *pcc = POWERPC_CPU_CLASS(oc);
+
+ dc->desc = "PowerPC e600";
+ pcc->init_proc = init_proc_e600;
+ pcc->check_pow = check_pow_hid0_74xx;
+ pcc->insns_flags = PPC_INSNS_BASE | PPC_STRING | PPC_MFTB |
+ PPC_FLOAT | PPC_FLOAT_FSEL | PPC_FLOAT_FRES |
+ PPC_FLOAT_FSQRT | PPC_FLOAT_FRSQRTE |
+ PPC_FLOAT_STFIWX |
+ PPC_CACHE | PPC_CACHE_ICBI |
+ PPC_CACHE_DCBA | PPC_CACHE_DCBZ |
+ PPC_MEM_SYNC | PPC_MEM_EIEIO |
+ PPC_MEM_TLBIE | PPC_MEM_TLBSYNC |
+ PPC_MEM_TLBIA | PPC_74xx_TLB |
+ PPC_SEGMENT | PPC_EXTERN |
+ PPC_ALTIVEC;
+ pcc->insns_flags2 = PPC_NONE;
+ pcc->msr_mask = 0x000000000205FF77ULL;
+ pcc->mmu_model = POWERPC_MMU_32B;
+#if defined(CONFIG_SOFTMMU)
+ pcc->handle_mmu_fault = ppc_hash32_handle_mmu_fault;
+#endif
+ pcc->excp_model = POWERPC_EXCP_74xx;
+ pcc->bus_model = PPC_FLAGS_INPUT_6xx;
+ pcc->bfd_mach = bfd_mach_ppc_7400;
+ pcc->flags = POWERPC_FLAG_VRE | POWERPC_FLAG_SE |
+ POWERPC_FLAG_BE | POWERPC_FLAG_PMM |
+ POWERPC_FLAG_BUS_CLK;
+}
+
#if defined (TARGET_PPC64)
#if defined(CONFIG_USER_ONLY)
#define POWERPC970_HID5_INIT 0x00000080
--
1.8.1.4
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [PATCH v3] e600 core for MPC86xx processors,
Julio Guerra <=