[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 1175513] Re: Qemu 1.5-git gpu clock control doesn`t wo
From: |
commiethebeastie |
Subject: |
[Qemu-devel] [Bug 1175513] Re: Qemu 1.5-git gpu clock control doesn`t work after guest reboot |
Date: |
Tue, 07 May 2013 17:11:58 -0000 |
>Are you attempting to rebind the HD6850 to host drivers after qemu is
shutdown
No, I did not rebind HD6850 to the host system. System hangs at shutdown
guest
>HD6850 - works fully, host hang on guest poweroff
Yes.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1175513
Title:
Qemu 1.5-git gpu clock control doesn`t work after guest reboot
Status in The Linux Kernel:
New
Status in QEMU:
New
Bug description:
I run qemu from git with such command:
qemu-system-x86_64 -nodefaults -m 4096 -smp 8,cores=4,threads=2,sockets=1
-cpu 'kvm64' -device usb-mouse -M q35 -vga qxl -no-hpet -boot once=c,menu=on
-device vfio-pci,host=02:00.0,x-vga=on \
-enable-kvm -monitor stdio -chardev
socket,path=/tmp/qga.sock,server,nowait,id=qga0 -device virtio-serial -device
virtserialport,chardev=qga0,name=org.qemu.guest_agent.0 -net
nic,vlan=0,model=e1000 -net tap,ifname=tap0,script=/etc/guest-ifup -usb -device
intel-hda -device hda-duplex \
-drive
file='/home/<user>/qemu/win7',if=none,id=drive-virtio-disk0,cache=writeback,aio=native,format=qed,discard=on
-device virtio-blk-pci,drive=drive-virtio-disk0,id=virtio-disk \
-drive
file='/dev/sr0',if=none,id=drive-ide1-0-0,media=cdrom,snapshot=off,format=raw
-device ide-drive,bus=ide.1,unit=0,drive=drive-ide1-0-0,id=ide1-0-0 \
-spice port=5930,disable-ticketing
Before guest (Windows 7) reboot, videocard works in 3D mode with full
frequency. But after reboot videocard works in 3D only with powersafe
frequency. Then I must reboot host for recover gpu clock control.
To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1175513/+subscriptions
- [Qemu-devel] [PATCH v4 0/6] KVM flash memory support, Jordan Justen, 2013/05/07
- [Qemu-devel] [PATCH v4 2/6] kvm: add kvm_readonly_mem_enabled, Jordan Justen, 2013/05/07
- [Qemu-devel] [PATCH v4 4/6] pflash_cfi01: memory region should be set to enable readonly mode, Jordan Justen, 2013/05/07
- [Qemu-devel] [PATCH v4 5/6] pc_sysfw: allow flash (-pflash) memory to be used with KVM, Jordan Justen, 2013/05/07
- [Qemu-devel] [PATCH v4 3/6] kvm: support using KVM_MEM_READONLY flag for readonly regions, Jordan Justen, 2013/05/07
- [Qemu-devel] [PATCH v4 1/6] isapc: Fix non-KVM qemu boot (read/write memory for isapc BIOS), Jordan Justen, 2013/05/07
- [Qemu-devel] [PATCH v4 6/6] pc_sysfw: change rom_only default to 0, Jordan Justen, 2013/05/07