[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH V5 7/8] virtio-blk: cleanup: QOM cast
From: |
fred . konrad |
Subject: |
[Qemu-devel] [PATCH V5 7/8] virtio-blk: cleanup: QOM cast |
Date: |
Mon, 18 Feb 2013 15:15:48 +0100 |
From: KONRAD Frederic <address@hidden>
Use QOM casts inside virtio-blk.
Signed-off-by: KONRAD Frederic <address@hidden>
---
hw/virtio-blk.c | 33 ++++++++++++++-------------------
hw/virtio-blk.h | 2 +-
2 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c
index 4502122..6f36d68 100644
--- a/hw/virtio-blk.c
+++ b/hw/virtio-blk.c
@@ -23,14 +23,6 @@
#endif
#include "virtio-bus.h"
-/*
- * Moving to QOM later in this series.
- */
-static VirtIOBlock *to_virtio_blk(VirtIODevice *vdev)
-{
- return (VirtIOBlock *)vdev;
-}
-
typedef struct VirtIOBlockReq
{
VirtIOBlock *dev;
@@ -46,12 +38,13 @@ typedef struct VirtIOBlockReq
static void virtio_blk_req_complete(VirtIOBlockReq *req, int status)
{
VirtIOBlock *s = req->dev;
+ VirtIODevice *vdev = VIRTIO_DEVICE(s);
trace_virtio_blk_req_complete(req, status);
stb_p(&req->in->status, status);
virtqueue_push(s->vq, &req->elem, req->qiov.size + sizeof(*req->in));
- virtio_notify(&s->vdev, s->vq);
+ virtio_notify(vdev, s->vq);
}
static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
@@ -396,7 +389,7 @@ static void virtio_blk_handle_request(VirtIOBlockReq *req,
static void virtio_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq)
{
- VirtIOBlock *s = to_virtio_blk(vdev);
+ VirtIOBlock *s = VIRTIO_BLK(vdev);
VirtIOBlockReq *req;
MultiReqBuffer mrb = {
.num_writes = 0,
@@ -464,7 +457,7 @@ static void virtio_blk_dma_restart_cb(void *opaque, int
running,
static void virtio_blk_reset(VirtIODevice *vdev)
{
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
- VirtIOBlock *s = to_virtio_blk(vdev);
+ VirtIOBlock *s = VIRTIO_BLK(vdev);
if (s->dataplane) {
virtio_blk_data_plane_stop(s->dataplane);
@@ -482,7 +475,7 @@ static void virtio_blk_reset(VirtIODevice *vdev)
*/
static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
{
- VirtIOBlock *s = to_virtio_blk(vdev);
+ VirtIOBlock *s = VIRTIO_BLK(vdev);
struct virtio_blk_config blkcfg;
uint64_t capacity;
int blk_size = s->conf->logical_block_size;
@@ -521,7 +514,7 @@ static void virtio_blk_update_config(VirtIODevice *vdev,
uint8_t *config)
static void virtio_blk_set_config(VirtIODevice *vdev, const uint8_t *config)
{
- VirtIOBlock *s = to_virtio_blk(vdev);
+ VirtIOBlock *s = VIRTIO_BLK(vdev);
struct virtio_blk_config blkcfg;
memcpy(&blkcfg, config, sizeof(blkcfg));
@@ -530,7 +523,7 @@ static void virtio_blk_set_config(VirtIODevice *vdev, const
uint8_t *config)
static uint32_t virtio_blk_get_features(VirtIODevice *vdev, uint32_t features)
{
- VirtIOBlock *s = to_virtio_blk(vdev);
+ VirtIOBlock *s = VIRTIO_BLK(vdev);
features |= (1 << VIRTIO_BLK_F_SEG_MAX);
features |= (1 << VIRTIO_BLK_F_GEOMETRY);
@@ -552,7 +545,7 @@ static uint32_t virtio_blk_get_features(VirtIODevice *vdev,
uint32_t features)
static void virtio_blk_set_status(VirtIODevice *vdev, uint8_t status)
{
- VirtIOBlock *s = to_virtio_blk(vdev);
+ VirtIOBlock *s = VIRTIO_BLK(vdev);
uint32_t features;
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
@@ -573,9 +566,10 @@ static void virtio_blk_set_status(VirtIODevice *vdev,
uint8_t status)
static void virtio_blk_save(QEMUFile *f, void *opaque)
{
VirtIOBlock *s = opaque;
+ VirtIODevice *vdev = VIRTIO_DEVICE(s);
VirtIOBlockReq *req = s->rq;
- virtio_save(&s->vdev, f);
+ virtio_save(vdev, f);
while (req) {
qemu_put_sbyte(f, 1);
@@ -588,12 +582,13 @@ static void virtio_blk_save(QEMUFile *f, void *opaque)
static int virtio_blk_load(QEMUFile *f, void *opaque, int version_id)
{
VirtIOBlock *s = opaque;
+ VirtIODevice *vdev = VIRTIO_DEVICE(s);
int ret;
if (version_id != 2)
return -EINVAL;
- ret = virtio_load(&s->vdev, f);
+ ret = virtio_load(vdev, f);
if (ret) {
return ret;
}
@@ -615,9 +610,9 @@ static int virtio_blk_load(QEMUFile *f, void *opaque, int
version_id)
static void virtio_blk_resize(void *opaque)
{
- VirtIOBlock *s = opaque;
+ VirtIODevice *vdev = VIRTIO_DEVICE(opaque);
- virtio_notify_config(&s->vdev);
+ virtio_notify_config(vdev);
}
static const BlockDevOps virtio_block_ops = {
diff --git a/hw/virtio-blk.h b/hw/virtio-blk.h
index 4f86597..44354c0 100644
--- a/hw/virtio-blk.h
+++ b/hw/virtio-blk.h
@@ -116,7 +116,7 @@ struct VirtIOBlkConf
};
typedef struct VirtIOBlock {
- VirtIODevice vdev;
+ VirtIODevice parent_obj;
BlockDriverState *bs;
VirtQueue *vq;
void *rq;
--
1.7.11.7
- [Qemu-devel] [PATCH V5 0/8] virtio-blk refactoring., fred . konrad, 2013/02/18
- [Qemu-devel] [PATCH V5 2/8] virtio-blk: add the virtio-blk device., fred . konrad, 2013/02/18
- [Qemu-devel] [PATCH V5 1/8] virtio-blk: don't use pointer for configuration., fred . konrad, 2013/02/18
- [Qemu-devel] [PATCH V5 3/8] virtio-blk-pci: switch to new API., fred . konrad, 2013/02/18
- [Qemu-devel] [PATCH V5 4/8] virtio-blk-s390: switch to the new API., fred . konrad, 2013/02/18
- [Qemu-devel] [PATCH V5 5/8] virtio-blk-ccw switch to new API., fred . konrad, 2013/02/18
- [Qemu-devel] [PATCH V5 6/8] virtio-blk: cleanup: init and exit functions., fred . konrad, 2013/02/18
- [Qemu-devel] [PATCH V5 8/8] virtio-blk: cleanup: remove qdev field., fred . konrad, 2013/02/18
- [Qemu-devel] [PATCH V5 7/8] virtio-blk: cleanup: QOM cast,
fred . konrad <=