qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 11/22] usb: Move clearing of queue on halt to the co


From: Hans de Goede
Subject: [Qemu-devel] [PATCH 11/22] usb: Move clearing of queue on halt to the core
Date: Mon, 15 Oct 2012 12:38:20 +0200

hcds which queue up more then one packet at once (uhci, ehci and xhci),
must clear the queue after an error which has caused the queue to halt.

Currently this is handled as a special case inside the hcd code, this
patch instead adds an USB_RET_REMOVE_FROM_QUEUE packet result code, teaches
the 3 hcds about this and moves the clearing of the queue on a halt into
the USB core.

Signed-off-by: Hans de Goede <address@hidden>
---
 hw/usb.h          |  1 +
 hw/usb/core.c     |  8 +++++++-
 hw/usb/hcd-ehci.c | 22 ++++++++--------------
 hw/usb/hcd-uhci.c | 22 ++++++----------------
 hw/usb/hcd-xhci.c |  4 ++++
 5 files changed, 26 insertions(+), 31 deletions(-)

diff --git a/hw/usb.h b/hw/usb.h
index 435cd42..ead03c9 100644
--- a/hw/usb.h
+++ b/hw/usb.h
@@ -45,6 +45,7 @@
 #define USB_RET_IOERROR           (-5)
 #define USB_RET_ASYNC             (-6)
 #define USB_RET_ADD_TO_QUEUE      (-7)
+#define USB_RET_REMOVE_FROM_QUEUE (-8)
 
 #define USB_SPEED_LOW   0
 #define USB_SPEED_FULL  1
diff --git a/hw/usb/core.c b/hw/usb/core.c
index 014e3ac..5a97a0e 100644
--- a/hw/usb/core.c
+++ b/hw/usb/core.c
@@ -442,8 +442,14 @@ void usb_packet_complete(USBDevice *dev, USBPacket *p)
     usb_packet_check_state(p, USB_PACKET_ASYNC);
     usb_packet_complete_one(dev, p);
 
-    while (!ep->halted && !QTAILQ_EMPTY(&ep->queue)) {
+    while (!QTAILQ_EMPTY(&ep->queue)) {
         p = QTAILQ_FIRST(&ep->queue);
+        if (ep->halted) {
+            /* Empty the queue on a halt */
+            p->result = USB_RET_REMOVE_FROM_QUEUE;
+            dev->port->ops->complete(dev->port, p);
+            continue;
+        }
         if (p->state == USB_PACKET_ASYNC) {
             break;
         }
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index 29365d9..e6f7642 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -1456,8 +1456,15 @@ static void ehci_async_complete_packet(USBPort *port, 
USBPacket *packet)
     }
 
     p = container_of(packet, EHCIPacket, packet);
-    trace_usb_ehci_packet_action(p->queue, p, "wakeup");
     assert(p->async == EHCI_ASYNC_INFLIGHT);
+
+    if (packet->result == USB_RET_REMOVE_FROM_QUEUE) {
+        trace_usb_ehci_packet_action(p->queue, p, "remove");
+        ehci_free_packet(p);
+        return;
+    }
+
+    trace_usb_ehci_packet_action(p->queue, p, "wakeup");
     p->async = EHCI_ASYNC_FINISHED;
     p->usb_status = packet->result;
 
@@ -2214,19 +2221,6 @@ static int ehci_state_writeback(EHCIQueue *q)
      * bit is clear.
      */
     if (q->qh.token & QTD_TOKEN_HALT) {
-        /*
-         * We should not do any further processing on a halted queue!
-         * This is esp. important for bulk endpoints with pipelining enabled
-         * (redirection to a real USB device), where we must cancel all the
-         * transfers after this one so that:
-         * 1) If they've completed already, they are not processed further
-         *    causing more stalls, originating from the same failed transfer
-         * 2) If still in flight, they are cancelled before the guest does
-         *    a clear stall, otherwise the guest and device can loose sync!
-         */
-        while ((p = QTAILQ_FIRST(&q->packets)) != NULL) {
-            ehci_free_packet(p);
-        }
         ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH);
         again = 1;
     } else {
diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c
index 46e544b..00dc9d5 100644
--- a/hw/usb/hcd-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -744,22 +744,6 @@ static int uhci_complete_td(UHCIState *s, UHCI_TD *td, 
UHCIAsync *async, uint32_
     return TD_RESULT_COMPLETE;
 
 out:
-    /*
-     * We should not do any further processing on a queue with errors!
-     * This is esp. important for bulk endpoints with pipelining enabled
-     * (redirection to a real USB device), where we must cancel all the
-     * transfers after this one so that:
-     * 1) If they've completed already, they are not processed further
-     *    causing more stalls, originating from the same failed transfer
-     * 2) If still in flight, they are cancelled before the guest does
-     *    a clear stall, otherwise the guest and device can loose sync!
-     */
-    while (!QTAILQ_EMPTY(&async->queue->asyncs)) {
-        UHCIAsync *as = QTAILQ_FIRST(&async->queue->asyncs);
-        uhci_async_unlink(as);
-        uhci_async_cancel(as);
-    }
-
     switch(ret) {
     case USB_RET_STALL:
         td->ctrl |= TD_CTRL_STALL;
@@ -918,6 +902,12 @@ static void uhci_async_complete(USBPort *port, USBPacket 
*packet)
     UHCIAsync *async = container_of(packet, UHCIAsync, packet);
     UHCIState *s = async->queue->uhci;
 
+    if (packet->result == USB_RET_REMOVE_FROM_QUEUE) {
+        uhci_async_unlink(async);
+        uhci_async_cancel(async);
+        return;
+    }
+
     if (async->isoc) {
         UHCI_TD td;
         uint32_t link = async->td;
diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index 53e1ea3..5648cc7 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -2834,6 +2834,10 @@ static void xhci_complete(USBPort *port, USBPacket 
*packet)
 {
     XHCITransfer *xfer = container_of(packet, XHCITransfer, packet);
 
+    if (packet->result == USB_RET_REMOVE_FROM_QUEUE) {
+        xhci_ep_nuke_one_xfer(xfer);
+        return;
+    }
     xhci_complete_packet(xfer, packet->result);
     xhci_kick_ep(xfer->xhci, xfer->slotid, xfer->epid);
 }
-- 
1.7.12.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]