[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC PATCH 09/13] qmp: add NBD server commands
From: |
Luiz Capitulino |
Subject: |
Re: [Qemu-devel] [RFC PATCH 09/13] qmp: add NBD server commands |
Date: |
Tue, 18 Sep 2012 17:11:59 -0300 |
On Mon, 27 Aug 2012 17:00:22 +0200
Paolo Bonzini <address@hidden> wrote:
> Adding an NBD server inside QEMU is trivial, since all the logic is
> in nbd.c and can be shared easily between qemu-nbd and QEMU itself.
> The main difference is that qemu-nbd serves a single unnamed export,
> while QEMU serves named exports.
Quickly reviewed the qmp part and it looks good to me (apart from TODOs
of course, specially on error handling).
I've only a few minor comments to the schema.
>
> Signed-off-by: Paolo Bonzini <address@hidden>
> ---
> Makefile.objs | 2 +-
> blockdev-nbd.c | 93
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> qapi-schema.json | 69 +++++++++++++++++++++++++++++++++++++++++
> qmp-commands.hx | 16 ++++++++++
> 4 file modificati, 179 inserzioni(+). 1 rimozione(-)
> create mode 100644 blockdev-nbd.c
>
> diff --git a/Makefile.objs b/Makefile.objs
> index 4412757..c42affc 100644
> --- a/Makefile.objs
> +++ b/Makefile.objs
> @@ -59,7 +59,7 @@ endif
> # suppress *all* target specific code in case of system emulation, i.e. a
> # single QEMU executable should support all CPUs and machines.
>
> -common-obj-y = $(block-obj-y) blockdev.o
> +common-obj-y = $(block-obj-y) blockdev.o blockdev-nbd.o
> common-obj-y += net.o net/
> common-obj-y += qom/
> common-obj-y += readline.o console.o cursor.o
> diff --git a/blockdev-nbd.c b/blockdev-nbd.c
> new file mode 100644
> index 0000000..5a415be
> --- /dev/null
> +++ b/blockdev-nbd.c
> @@ -0,0 +1,93 @@
> +/*
> + * QEMU host block devices
> + *
> + * Copyright (c) 2003-2008 Fabrice Bellard
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or
> + * later. See the COPYING file in the top-level directory.
> + */
> +
> +#include "blockdev.h"
> +#include "hw/block-common.h"
> +#include "monitor.h"
> +#include "qerror.h"
> +#include "sysemu.h"
> +#include "qmp-commands.h"
> +#include "trace.h"
> +#include "nbd.h"
> +#include "qemu_socket.h"
> +
> +static int server_fd = -1;
> +
> +static void nbd_accept(void *opaque)
> +{
> + struct sockaddr_in addr;
> + socklen_t addr_len = sizeof(addr);
> +
> + int fd = accept(server_fd, (struct sockaddr *)&addr, &addr_len);
> + if (fd >= 0) {
> + nbd_client_new(NULL, fd, NULL);
> + }
> +}
> +
> +static void nbd_server_start(QemuOpts *opts, Error **errp)
> +{
> + if (server_fd != -1) {
> + /* TODO: error */
> + return;
> + }
> +
> + server_fd = inet_listen_opts(opts, 0, errp);
> + if (server_fd != -1) {
> + qemu_set_fd_handler2(server_fd, NULL, nbd_accept, NULL, NULL);
> + }
> +}
> +
> +void qmp_nbd_server_start(IPSocketAddress *addr, Error **errp)
> +{
> + QemuOpts *opts;
> +
> + opts = qemu_opts_create(&socket_opts, NULL, 0, NULL);
> + qemu_opt_set(opts, "host", addr->host);
> + qemu_opt_set(opts, "port", addr->port);
> +
> + addr->ipv4 |= !addr->has_ipv4;
> + addr->ipv6 |= !addr->has_ipv6;
> + if (!addr->ipv4 || !addr->ipv6) {
> + qemu_opt_set_bool(opts, "ipv4", addr->ipv4);
> + qemu_opt_set_bool(opts, "ipv6", addr->ipv6);
> + }
> +
> + nbd_server_start(opts, errp);
> + qemu_opts_del(opts);
> +}
> +
> +
> +void qmp_nbd_server_add(const char *device, bool has_writable, bool writable,
> + Error **errp)
> +{
> + BlockDriverState *bs;
> + NBDExport *exp;
> +
> + bs = bdrv_find(device);
> + if (!bs) {
> + error_set(errp, QERR_DEVICE_NOT_FOUND, device);
> + return;
> + }
> +
> + if (nbd_export_find(bdrv_get_device_name(bs))) {
> + /* TODO: error */
> + return;
> + }
> +
> + exp = nbd_export_new(bs, 0, -1, writable ? 0 : NBD_FLAG_READ_ONLY);
> + nbd_export_set_name(exp, device);
> +}
> +
> +void qmp_nbd_server_stop(Error **errp)
> +{
> + nbd_export_close_all();
> + qemu_set_fd_handler2(server_fd, NULL, NULL, NULL, NULL);
> + close(server_fd);
> + server_fd = -1;
> +}
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 3d2b2d1..d792d2c 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -2275,6 +2275,30 @@
> 'opts': 'NetClientOptions' } }
>
> ##
> +# @IPSocketAddress
> +#
> +# Captures the destination address of an IP socket
> +#
> +# @host: host part of the address
> +#
> +# @port: port part of the address, or lowest port if @to is present
> +#
> +# @to: highest port to try
Doesn't exist in data. If you add, please use a more descriptive name.
> +#
> +# @ipv4: whether to accept IPv4 addresses, default try both IPv4 and IPv6
> +#
> +# @ipv6: whether to accept IPv6 addresses, default try both IPv4 and IPv6
Both are missing #optional.
> +#
> +# Since 1.3
> +##
> +{ 'type': 'IPSocketAddress',
> + 'data': {
> + 'host': 'str',
> + 'port': 'str',
> + '*ipv4': 'bool',
> + '*ipv6': 'bool' } }
> +
> +##
> # @getfd:
> #
> # Receive a file descriptor via SCM rights and assign it a name
> @@ -2454,3 +2478,46 @@
> #
> ##
> { 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
> +
> +##
> +# @nbd-server-start:
> +#
> +# Start an NBD server listening on the given host and port.
> +#
> +# @addr: Interface on which to listen, nothing for all interfaces.
> +#
> +# Since: 1.3.0
> +#
> +##
> +{ 'command': 'nbd-server-start',
> + 'data': { 'addr': 'IPSocketAddress' } }
> +
> +##
> +# @nbd-server-add:
> +#
> +# Export a device to QEMU's embedded NBD server.
> +#
> +# @device: Block device to be exported
> +#
> +# @writable: Whether clients should be able to write to the device via the
> +# NBD connection (default false).
Missing #optional.
> +#
> +# Returns: error if the device is already marked for export.
> +#
> +# Since: 1.3.0
> +#
> +##
> +{ 'command': 'nbd-server-add', 'data': {'device': 'str', '*writable':
> 'bool'} }
> +
> +##
> +# @nbd-server-stop:
> +#
> +# Stop QEMU's embedded NBD server, and unregister all devices previously
> +# added via nbd-server-add
> +#
> +# Returns: error if the server is already running.
That error pertains to nbd-start-start.
> +#
> +# Since: 1.3.0
> +#
> +##
> +{ 'command': 'nbd-server-stop' }
> diff --git a/qmp-commands.hx b/qmp-commands.hx
> index 2ce4ce6..1f7d6fe 100644
> --- a/qmp-commands.hx
> +++ b/qmp-commands.hx
> @@ -2481,6 +2481,22 @@ EQMP
> },
>
> {
> + .name = "nbd-server-start",
> + .args_type = "addr:q",
> + .mhandler.cmd_new = qmp_marshal_input_nbd_server_start,
> + },
> + {
> + .name = "nbd-server-add",
> + .args_type = "device:B,writable:b?",
> + .mhandler.cmd_new = qmp_marshal_input_nbd_server_add,
> + },
> + {
> + .name = "nbd-server-stop",
> + .args_type = "",
> + .mhandler.cmd_new = qmp_marshal_input_nbd_server_stop,
> + },
> +
> + {
> .name = "change-vnc-password",
> .args_type = "password:s",
> .mhandler.cmd_new = qmp_marshal_input_change_vnc_password,
- Re: [Qemu-devel] [RFC PATCH 09/13] qmp: add NBD server commands,
Luiz Capitulino <=