[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC-v2 3/6] vhost-scsi: add -vhost-scsi host device fo
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [RFC-v2 3/6] vhost-scsi: add -vhost-scsi host device for use with tcm-vhost |
Date: |
Sun, 19 Aug 2012 11:44:26 +0300 |
On Sat, Aug 18, 2012 at 05:36:26PM -0700, Nicholas A. Bellinger wrote:
> On Sat, 2012-08-18 at 22:12 +0300, Michael S. Tsirkin wrote:
> > On Tue, Aug 14, 2012 at 01:31:14PM -0700, Nicholas A. Bellinger wrote:
> > > On Mon, 2012-08-13 at 11:53 +0300, Michael S. Tsirkin wrote:
> > > > On Mon, Aug 13, 2012 at 08:35:14AM +0000, Nicholas A. Bellinger wrote:
> > > > > From: Stefan Hajnoczi <address@hidden>
>
> <SNIP>
>
> > > > > +static VHostSCSI *vhost_scsi_add(const char *id, const char *wwpn,
> > > > > + uint16_t tpgt)
> > > > > +{
> > > > > + VHostSCSI *vs = g_malloc0(sizeof(*vs));
> > > > > + int ret;
> > > > > +
> > > > > + /* TODO set up vhost-scsi device and bind to
> > > > > tcm_vhost/$wwpm/tpgt_$tpgt */
> > > > > + fprintf(stderr, "wwpn = \"%s\" tpgt = \"%u\"\n", id, tpgt);
> > > > > +
> > > > > + ret = vhost_dev_init(&vs->dev, -1, "/dev/vhost-scsi", false);
> > > >
> > > > This -1 is a hack. You need to support passing in fd from
> > > > the monitor, and pass it here.
> > > >
> > >
> > > Mmm, looking at how vhost_net_init + tap.c does this, but am not quite
> > > what fd needs to be propagated up for virtio-scsi -> vhost-scsi..
> > >
> > > Can you please elaborate on this one a bit more..?
> > >
> >
> > The idea is to allow running as a user without access to
> > /dev/vhost-scsi.
> > For this, allow passing in the fd of /dev/vhost-scsi through unix domain
> > sockets.
> >
>
> Ah, that is a pretty neat trick.. So for vhost-scsi code, this would
> mean something along the lines of the following, yes..?
Yes but with one correction. See below.
> Thanks MST!
> diff --git a/hw/vhost-scsi.c b/hw/vhost-scsi.c
> index 4206a75..8af8758 100644
> --- a/hw/vhost-scsi.c
> +++ b/hw/vhost-scsi.c
> @@ -21,6 +21,7 @@ struct VHostSCSI {
> const char *id;
> const char *wwpn;
> uint16_t tpgt;
> + int vhostfd;
> struct vhost_dev dev;
> struct vhost_virtqueue vqs[VHOST_SCSI_VQ_NUM];
> QLIST_ENTRY(VHostSCSI) list;
> @@ -114,13 +115,32 @@ void vhost_scsi_stop(VHostSCSI *vs, VirtIODevice *vdev)
> }
>
> static VHostSCSI *vhost_scsi_add(const char *id, const char *wwpn,
> - uint16_t tpgt)
> + uint16_t tpgt, const char *vhostfd_str)
> {
> - VHostSCSI *vs = g_malloc0(sizeof(*vs));
> + VHostSCSI *vs;
> int ret;
>
> + vs = g_malloc0(sizeof(*vs));
> + if (!vs) {
> + error_report("vhost-scsi: unable to allocate *vs\n");
> + return NULL;
> + }
> + vs->vhostfd = -1;
> +
> + if (vhostfd_str) {
> + if (!qemu_isdigit(vhostfd_str[0])) {
> + error_report("vhost-scsi: passed vhostfd value is not a
> digit\n");
> + return NULL;
This let you use an fd which was open at exec
but does not allow for fd to be open later in
case device is hot-plugged.
See net_handle_fd_param - I think you can just rename it
qemu_handle_fd_param to avoid code duplication.
> + }
> +
> + vs->vhostfd = qemu_parse_fd(vhostfd_str);
> + if (vs->vhostfd == -1) {
> + error_report("vhost-scsi: unable to parse vs->vhostfd\n");
> + return NULL;
> + }
> + }
> /* TODO set up vhost-scsi device and bind to tcm_vhost/$wwpm/tpgt_$tpgt
> */
> - ret = vhost_dev_init(&vs->dev, -1, "/dev/vhost-scsi", false);
> + ret = vhost_dev_init(&vs->dev, vs->vhostfd, "/dev/vhost-scsi", false);
> if (ret < 0) {
> error_report("vhost-scsi: vhost initialization failed: %s\n",
> strerror(-ret));
> @@ -140,7 +160,7 @@ static VHostSCSI *vhost_scsi_add(const char *id, const
> char *wwpn,
> VHostSCSI *vhost_scsi_add_opts(QemuOpts *opts)
> {
> const char *id;
> - const char *wwpn;
> + const char *wwpn, *vhostfd;
> uint64_t tpgt;
>
> id = qemu_opts_id(opts);
> @@ -164,6 +184,7 @@ VHostSCSI *vhost_scsi_add_opts(QemuOpts *opts)
> error_report("vhost-scsi: \"%s\" needs a 16-bit tpgt\n", id);
> return NULL;
> }
> + vhostfd = qemu_opt_get(opts, "vhostfd");
>
> - return vhost_scsi_add(id, wwpn, tpgt);
> + return vhost_scsi_add(id, wwpn, tpgt, vhostfd);
> }
> diff --git a/qemu-config.c b/qemu-config.c
> index 33399ea..2d4884c 100644
> --- a/qemu-config.c
> +++ b/qemu-config.c
> @@ -636,6 +636,9 @@ QemuOptsList qemu_vhost_scsi_opts = {
> }, {
> .name = "tpgt",
> .type = QEMU_OPT_NUMBER,
> + }, {
> + .name = "vhostfd",
> + .type = QEMU_OPT_STRING,
> },
> { /* end of list */ }
> },
- [Qemu-devel] [RFC-v2 6/6] virtio-scsi: Fix incorrect VirtIOSCSI->cmd_vqs[0] definition, (continued)
[Qemu-devel] [RFC-v2 3/6] vhost-scsi: add -vhost-scsi host device for use with tcm-vhost, Nicholas A. Bellinger, 2012/08/13
Re: [Qemu-devel] [RFC-v2 3/6] vhost-scsi: add -vhost-scsi host device for use with tcm-vhost, Michael S. Tsirkin, 2012/08/13
Re: [Qemu-devel] [RFC-v2 3/6] vhost-scsi: add -vhost-scsi host device for use with tcm-vhost, Blue Swirl, 2012/08/13
Re: [Qemu-devel] [RFC-v2 3/6] vhost-scsi: add -vhost-scsi host device for use with tcm-vhost, Paolo Bonzini, 2012/08/20
Re: [Qemu-devel] [RFC-v2 0/6] vhost-scsi: Add support for host virtualized target, Michael S. Tsirkin, 2012/08/13