[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegi
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion |
Date: |
Thu, 14 Jun 2012 19:26:12 +0300 |
On Thu, Jun 14, 2012 at 10:02:58AM -0600, Alex Williamson wrote:
> On Thu, 2012-06-14 at 18:45 +0300, Michael S. Tsirkin wrote:
> > On Thu, Jun 14, 2012 at 09:09:47AM -0600, Alex Williamson wrote:
> > > On Thu, 2012-06-14 at 17:50 +0300, Michael S. Tsirkin wrote:
> > > > On Thu, Jun 14, 2012 at 08:21:39AM -0600, Alex Williamson wrote:
> > > > > On Thu, 2012-06-14 at 13:24 +0300, Michael S. Tsirkin wrote:
> > > > > > On Wed, Jun 13, 2012 at 10:51:47PM -0600, Alex Williamson wrote:
> > > > > > > These don't have to be contiguous. Size them to only what
> > > > > > > they need and use separate MemoryRegions for the vector
> > > > > > > table and PBA.
> > > > > > >
> > > > > > > Signed-off-by: Alex Williamson <address@hidden>
> > > > > >
> > > > > > Why is this still using NATIVE?
> > > > >
> > > > > Because the bug already exists,
> > > >
> > > > We have lots of broken code. The way progress happens here is
> > > > such code is in a kind of freeze until fixed. This way whoever needs new
> > > > features gets to fix the bugs too.
> > >
> > > In other words, you impose a toll and inhibit forward progress until
> > > someone fixes it? I have no place telling you how to be a maintainer,
> > > but I personally find that this style makes attempting to contribute
> > > code to anything pci/msi/msix related a huge pain. There are far too
> > > many of these land mines in the code and simple fixes easily explode
> > > into tangentially related changes off your todo list.
> >
> > I try to pick simple fixes up straight away. Pls try to keep the fixes
> > simpler :)
>
> What does that have to do with shoving todo list items down the throats
> of contributors?
If you write new code you do not get to use legacy interfaces.
But - if you fix bugs you are not required to fix all the bugs in one go.
If you mix bugfixes and features all is treated as new code.
> > > > > this patch doesn't make it worse, so at best it's a tangentially
> > > > > related additional fix.
> > > > > It may seem like a s/NATIVE/LITTLE/ to you, but to me it's asking to
> > > > > completely scrub
> > > > > msix.c for endian correctness. Is this going to be the carrot you
> > > > > hold
> > > > > out to accept the rest of the series?
> > > > >
> > > > > Alex
> > > >
> > > > Unfortunately no promises yet, and that is because you basically decided
> > > > to rewrite lots of code in your preferred style while also adding new
> > > > functionality.
> > > > If changes were done in small steps, then I could apply things we can
> > > > agree on and defer the ones we don't. Sometimes it's hard, but clearly
> > > > not in this case.
> > >
> > > Patches can always be reduced into smaller changes, but at some point we
> > > have to call it good enough. I split one patch into 6 and thought that
> > > did a pretty good job.
> >
> > It's not the mechanical splitting of patches that is needed.
> > In one case you actually added a new function in place X then moved it
> > to place Y. And the new order does not make sense: init then uninit looks
> > cleaner.
>
> uninit was moved because I was able to remove duplicate code by making
> init call uninit on error. Do you prefer a prototype to avoid code
> moves in that case?
msix.h has a prototype already I think.
> Doesn't matter now, it's fixed with Jan's
> suggestion and I've already split the move of another tiny function to a
> separate patch.
This does not matter. What matters is making things easy to review.
If you send me a patch moving functions around, I can put them
side by side and compare + and -. If you make a
small cosmetic change I can see it is equivalent.
If you add functionality I see how it works.
But if you mix these types of change it's very hard to review.
> > > Should I remove everywhere that I've added a new
> > > line to avoid imposing my style on the rest of the code?
> >
> > Each new line? No, that would be taking it to extreme because newlines are
> > easy to ignore normally. Though if someone sends me a patch with 1000
> > newlines tweaked and functional changes in the same patch, I won't apply
> > it.
>
> Well then, I'm not sure what you mean by "you basically decided to
> rewrite lots of code in your preferred style".
The diff was very large, is what I mean.
> > > The next
> > > version will eliminate the add_config move thanks to Jan's constructive
> > > suggestion, so I hope it meets your standards. Thanks,
> > >
> > > Alex
> >
> > Please try to address other comments too, like naming
> > constants. I would hate to get another revision that just ignores them.
>
> It will unless you counter my rebuttal to why I'm not using macros
> there. To repeat:
>
> On Wed, 2012-06-13 at 17:05 -0600, Alex Williamson wrote:
> On Wed, 2012-06-13 at 23:43 +0300, Michael S. Tsirkin wrote:
> > > On Tue, Jun 12, 2012 at 02:03:26PM -0600, Alex Williamson wrote:
> > > > + /*
> > > > + * Migration compatibility dictates that this remains a 4k
> > > > + * BAR with the vector table in the lower half and PBA in
> > > > + * the upper half.
> > > > + */
> > > > + if (nentries * PCI_MSIX_ENTRY_SIZE > 2048) {
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + memory_region_init(bar, name, 4096);
> > > > +
> > > > + ret = msix_init(pdev, nentries, bar, bar_nr, 0, bar, bar_nr, 2048,
> > > > 0);
> > >
> > > Lots of constants.
> > > Current code uses macros for these, e.g.
> > > MSIX_PAGE_PENDING, MSIX_PAGE_PENDING /2.
> > >
> > > Let's keep it that way.
> >
> > There is absolutely no valid use for them outside of this function.
They still appear multiple times. And 2048 is middle of page
but PAGE/2 is clearer.
> I
> > explain the size in the comment immediately above where they're used.
> > Macro-izing these just risks someone assuming there's a standard or
> > misusing it for something else (see device assignment imposing a 4k
> > MSI-X table for example...)
A valid concern, but won't help against people copying code :)
Since you now use it from the exclusive call only, rename it
MSIX_EXLUSIVE_BAR_SIZE, MSIX_EXLUSIVE_BAR_PENDING?
It's actually what it is.
--
MST
- [Qemu-devel] [PATCH v2 3/6] virtio: Convert to msix_init_exclusive_bar() interface, (continued)
- [Qemu-devel] [PATCH v2 3/6] virtio: Convert to msix_init_exclusive_bar() interface, Alex Williamson, 2012/06/14
- [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion, Alex Williamson, 2012/06/14
- Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion, Jan Kiszka, 2012/06/14
- Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion, Michael S. Tsirkin, 2012/06/14
- Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion, Alex Williamson, 2012/06/14
- Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion, Michael S. Tsirkin, 2012/06/14
- Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion, Alex Williamson, 2012/06/14
- Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion, Michael S. Tsirkin, 2012/06/14
- Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion, Alex Williamson, 2012/06/14
- Re: [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion,
Michael S. Tsirkin <=
[Qemu-devel] [PATCH v2 5/6] msix: Allow full specification of MSIX layout, Alex Williamson, 2012/06/14
[Qemu-devel] [PATCH v2 6/6] msix: Fix last PCIDevice naming inconsitency, Alex Williamson, 2012/06/14