[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support
From: |
Jeff Cody |
Subject: |
Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support |
Date: |
Fri, 08 Jun 2012 10:32:49 -0400 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:12.0) Gecko/20120430 Thunderbird/12.0.1 |
On 06/08/2012 09:53 AM, Stefan Hajnoczi wrote:
> On Fri, Jun 8, 2012 at 2:19 PM, Jeff Cody <address@hidden> wrote:
>> On 06/08/2012 08:42 AM, Stefan Hajnoczi wrote:
>>> On Thu, Jun 7, 2012 at 3:14 PM, Jeff Cody <address@hidden> wrote:
>>>> On 06/07/2012 02:19 AM, Taisuke Yamada wrote:
>>> We want to commit snap1.qcow2 down into vm001.img while the guest is
>>> running:
>>>
>>> vm001.img <-- snap2.qcow2
>>>
>>> This means copying allocated blocks from snap1.qcow2 and writing them
>>> into vm001.img. Once this process is complete it is safe to delete
>>> snap1.qcow2 since all data is now in vm001.img.
>>
>> Yes, this is the same as what we are wanting to accomplish. The trick
>> here is open vm001.img r/w, in a safe manner (by safe, I mean able to
>> abort in case of error while keeping the guest running live).
>>
>> My thoughts on this has revolved around something similar to what was
>> done in bdrv_append(), where a duplicate BDS is created, a new file-open
>> performed with the appropriate access mode flags, and if successful
>> swapped out for the originally opened BDS for vm001.img. If there is an
>> error, the new BDS is abandoned without modifying the BDS list.
>
> Yes, there needs to be an atomic way to try opening the image read/write.
>
>>>
>>> As a result we have made the backing file chain shorter. This is
>>> improtant because otherwise incremental backup would grow the backing
>>> file chain forever - each time it takes a new snapshot the chain
>>> becomes longer and I/O accesses can become slower!
>>>
>>> The task is to add a new block job type called "commit". It is like
>>> the qemu-img commit command except it works while the guest is
>>> running.
>>>
>>> The new QMP command should look like this:
>>>
>>> { 'command': 'block-commit', 'data': { 'device': 'str', 'image':
>>> 'str', 'base': 'str', '*speed': 'int' }
>>
>> This is very similar to what I was thinking as well - I think the only
>> difference in the command is that I what you called 'image' I called
>> 'top', and the argument order was after base.
>>
>> Here is what I had for the command:
>>
>> { 'command': 'block-commit', 'data': { 'device': 'str', '*base': 'str',
>> '*top': 'str', '*speed': 'int' } }
>>
>> I don't think I have a strong preference for either of our proposed
>> commands - they are essentially the same.
>
> Yes, they are basically the same. I don't mind which one we use.
>
>>>
>>> Note that block-commit cannot work on the top-most image since the
>>> guest is still writing to that image and we might never be able to
>>> copy all the data into the base image (the guest could write new data
>>> as quickly as we copy it to the base). The command should check for
>>> this and reject the top-most image.
>>
>> By this you mean that you would like to disallow committing the
>> top-level image to the base? Perhaps there is a way to attempt to
>> converge, and adaptively give more time to the co-routine if we are able
>> to detect divergence. This may require violating the 'speed' parameter,
>> however, and make the commit less 'live'.
>
> Yes, I think we should disallow merging down the topmost image. The
> convergence problem is the same issue that live migration has. It's a
> hard problem and not something that is essential for block-commit. It
> would add complexity into the block-commit implementation - the only
> benefit would be that you can merge down the last COW snapshot. We
> already have an implementation that does this: the "commit" command
> which stops the guest :).
OK. And, it is better to get this implemented now, and if desired, I
suppose we can always revisit the convergence at a later date (or not at
all, if there is no pressing case for it).
>
> If we take Taisuke's scenario, just create a snapshot on the SSD
> immediately before merging down:
>
> /big-slow-cheap-disk/master.img <- /small-fast-expensive-ssd/cow.qcow2
>
> (qemu) snapshot_blkdev ...
>
> /big-slow-cheap-disk/master.img <-
> /small-fast-expensive-ssd/cow.qcow2 <-
> /small-fast-expensive-ssd/newcow.qcow2
>
> (qemu) block-commit cow.qcow2
>
> /big-slow-cheap-disk/master.img <- /small-fast-expensive-ssd/newcow.qcow2
>
>>>
>>> Let's figure out how to specify block-commit so we're all happy, that
>>> way we can avoid duplicating work. Any comments on my notes above?
>>>
>>
>> I think we are almost completely on the same page - devil is in the
>> details, of course (for instance, on how to convert the destination base
>> from r/o to r/w).
>
> Great. The atomic r/o -> r/w transition and the commit coroutine can
> be implemented on in parallel. Are you happy to implement the atomic
> r/o -> r/w transition since you wrote bdrv_append()? Then Zhi Hui can
> assume that part already works and focus on implementing the commit
> coroutine in the meantime. I'm just suggesting a way to split up the
> work, please let me know if you think this is good.
I am happy to do it that way. I'll shift my focus to the atomic image
reopen in r/w mode. I'll go ahead and post my diagrams and other info
for block-commit on the wiki, because I don't think it conflicts with we
discussed above (although I will modify my diagrams to not show commit
from the top-level image). Of course, feel free to change it as
necessary.
Thanks,
Jeff
- [Qemu-devel] CoW image commit+shrink(= make_empty) support, Taisuke Yamada, 2012/06/07
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Jeff Cody, 2012/06/07
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Stefan Hajnoczi, 2012/06/08
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Jeff Cody, 2012/06/08
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Stefan Hajnoczi, 2012/06/08
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support,
Jeff Cody <=
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Kevin Wolf, 2012/06/08
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Jeff Cody, 2012/06/08
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Kevin Wolf, 2012/06/08
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Jeff Cody, 2012/06/08
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Kevin Wolf, 2012/06/08
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Jeff Cody, 2012/06/09
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Kevin Wolf, 2012/06/11
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Paolo Bonzini, 2012/06/10
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Kevin Wolf, 2012/06/11
- Re: [Qemu-devel] CoW image commit+shrink(= make_empty) support, Paolo Bonzini, 2012/06/11