[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v4] pci: clean all funcs when hot-removing multifunc
From: |
kongjianjun |
Subject: |
[Qemu-devel] [PATCH v4] pci: clean all funcs when hot-removing multifunc device |
Date: |
Sun, 20 May 2012 10:31:04 +0800 |
From: Amos Kong <address@hidden>
Hotplug CallTrace:
int acpiphp_enable_slot(struct acpiphp_slot *slot)
\_enable_device(slot);
\_pci_bus_add_devices(bus);
# un-added new devs(all funcs in slot) will be added
list_for_each_entry(dev, &bus->devices, bus_list) {
if (dev->is_added)
continue;
pci_bus_add_device(dev);
device_add(&dev->dev);
dev->is_added = 1;
'dev->is_added' is used to trace if pci dev is added to bus, all funcs in
same slot would be added to bus in enable_device(slot). So we need to clean
all funcs of same slot in disable_device(slot).
But hot-remove exists bug: https://bugzilla.kernel.org/show_bug.cgi?id=43219
(dmesg and DSDT were attached in bz), detail:
. Boot up a Linux VM with 8 pci block devices which are the 8
functions in one pci slot.
| # qemu-kvm ...
| -drive file=images/u0,if=none,id=drv0,format=qcow2,cache=none \
| -device virtio-blk-pci,drive=drv0,id=v0,multifunction=on,addr=0x03.0 \
| ....
| -drive file=images/u7,if=none,id=drv7,format=qcow2,cache=none \
| -device virtio-blk-pci,drive=drv7,id=v7,multifunction=on,addr=0x03.7 \
. Check devices in guest.
| vm)# ls /dev/vd*
| vda vdb vdc vde vdf vdg vdh
| vm)# lspci |grep block
| 00:03.0 SCSI storage controller: Red Hat, Inc Virtio block device
| ...
| 00:03.7 SCSI storage controller: Red Hat, Inc Virtio block device
|
. Func1~7 still exist in guest after hot-removing the whole slot
by qemu monitor cmd.
| vm)# lspci |grep block (00:03.0 disappeared)
| 00:03.1 SCSI storage controller: Red Hat, Inc Virtio block device (rev ff)
| ...
| 00:03.7 SCSI storage controller: Red Hat, Inc Virtio block device (rev ff)
| vm)# ls /dev/vd* (vda disappeared)
| vdb vdc vde vdf vdg vdh
| vm)# mkfs /dev/vdb
| INFO: task mkfs.ext2:1784 blocked for more than 120 seconds.
We process pci slot as a whole device in pciphp spec, seabios only
defines one device for a slot in ACPI DSDT table.
In acpiphp_glue.c:register_slot(), only one entry is added (for func#0)
into 'slot->funcs' list. When we release the whole slot, only
the entry in 'slot->funcs' will be cleaned, so func#1~7 could
not be cleaned from system.
| drivers/pci/hotplug/acpiphp_glue.c:
| static int disable_device(struct acpiphp_slot *slot) {
| list_for_each_entry(func, &slot->funcs, sibling) {
| pdev = pci_get_slot(slot->bridge->pci_bus,
| PCI_DEVFN(slot->device, func->function));
| ..clean code.. // those code is only executed 1 time(for func#0)
| __pci_remove_bus_device(pdev);
| pci_dev_put(pdev);
Hotpluging multifunc of guests(WinXp/Win7) is fine.
---
v1 thread: http://marc.info/?t=131597601700003&r=1&w=2
Changes from v1:
- rebase patch to latest linux.git
- remove unnecessary multiplefunction check
- rename 'i' to meaningful 'fn'
- fix coding style
Changes from v2:
- update detail reason(calltrace) to commitlog
- remove hardcode 8, find funcs in pci devlist
Changes from v3:
- use pci_bus_sem lock when walking bus->devices list
Signed-off-by: Amos Kong <address@hidden>
---
drivers/pci/hotplug/acpiphp_glue.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c
b/drivers/pci/hotplug/acpiphp_glue.c
index 806c44f..7109506 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -893,6 +893,7 @@ static int disable_device(struct acpiphp_slot *slot)
pdev = pci_get_slot(bus, PCI_DEVFN(slot->device, 0));
if (!pdev)
goto err_exit;
+ pci_dev_put(pdev);
list_for_each_entry(func, &slot->funcs, sibling) {
if (func->bridge) {
@@ -902,9 +903,20 @@ static int disable_device(struct acpiphp_slot *slot)
func->bridge = NULL;
}
- pdev = pci_get_slot(slot->bridge->pci_bus,
- PCI_DEVFN(slot->device, func->function));
- if (pdev) {
+ while (1) {
+ /* pci_bus_sem is used to protect bus->devices list,
+ it may cause invalid memory access if threads
+ modify bus->devices list concurrently. */
+ down_read(&pci_bus_sem);
+ list_for_each_entry(pdev, &bus->devices, bus_list)
+ if (PCI_SLOT(pdev->devfn) == slot->device) {
+ pci_dev_get(pdev);
+ break;
+ }
+ up_read(&pci_bus_sem);
+
+ if (PCI_SLOT(pdev->devfn) != slot->device)
+ break;
pci_stop_bus_device(pdev);
if (pdev->subordinate) {
disable_bridges(pdev->subordinate);
--
1.7.9.5
- [Qemu-devel] [PATCH v3] pci: clean all funcs when hot-removing multifunc device, Amos Kong, 2012/05/10
- Re: [Qemu-devel] [PATCH v3] pci: clean all funcs when hot-removing multifunc device, Jiang Liu, 2012/05/10
- Re: [Qemu-devel] [PATCH v3] pci: clean all funcs when hot-removing multifunc device, Michael S. Tsirkin, 2012/05/10
- Re: [Qemu-devel] [PATCH v3] pci: clean all funcs when hot-removing multifunc device, Amos Kong, 2012/05/10
- Re: [Qemu-devel] [PATCH v3] pci: clean all funcs when hot-removing multifunc device, Amos Kong, 2012/05/10
- Re: [Qemu-devel] [PATCH v3] pci: clean all funcs when hot-removing multifunc device, Jiang Liu, 2012/05/11
- Re: [Qemu-devel] [PATCH v3] pci: clean all funcs when hot-removing multifunc device, Bjorn Helgaas, 2012/05/16
- [Qemu-devel] [PATCH v4] pci: clean all funcs when hot-removing multifunc device,
kongjianjun <=
- Re: [Qemu-devel] [PATCH v3] pci: clean all funcs when hot-removing multifunc device, Amos Kong, 2012/05/19
- [Qemu-devel] [PATCH v5] pci: clean all funcs when hot-removing multifunc device, kongjianjun, 2012/05/19