Re: [Qemu-devel] [PATCH] Memory: unify ioport registration

[Avi Kivity]

On 04/02/2012 05:37 PM, Julien Grall wrote:
> Replace register_ioport* by portio_list_*.
> All ioports registered by the previous functions don't call memory callback.
>
> Signed-off-by: Julien Grall <address@hidden>
> ---
>  hw/acpi_piix4.c |   22 +++++++++++++++++++---
>  hw/cirrus_vga.c |   31 ++++++++++++++++++-------------
>  hw/pc.c         |   39 +++++++++++++++++++++++++--------------
>  hw/serial.c     |   13 +++++++++++--

Please split into separate patches.

> @@ -27,6 +27,7 @@
>  #include "sysemu.h"
>  #include "range.h"
>  #include "ioport.h"
> +#include "exec-memory.h"
>  

Remove please.

>  //#define DEBUG
>  
> @@ -325,10 +326,23 @@ static void piix4_pm_machine_ready(Notifier *n, void 
> *opaque)
>  
>  }
>  
> +static const MemoryRegionPortio piix4_portio_list[] = {
> +    { 0x00, 64, 1, .read = smb_ioport_readb, }, /* s->smb_io_base */
> +    { 0x00, 64, 1, .write = smb_ioport_writeb, }, /* s->smb_io_base */
> +    PORTIO_END_OF_LIST(),
> +};
> +
> +static const MemoryRegionPortio acpi_portio_list[] = {
> +    { 0x00, 4, 4, .write = acpi_dbg_writel, }, /* ACPI_DBG_IO_ADDR */
> +    PORTIO_END_OF_LIST(),
> +};
> +
>  static int piix4_pm_initfn(PCIDevice *dev)
>  {
>      PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
>      uint8_t *pci_conf;
> +    PortioList *piix4_port_list = g_new(PortioList, 1);
> +    PortioList *acpi_port_list = g_new(PortioList, 1);
>  

Make these fields in PIIX4PMState to avoid the allocation.

>      pci_conf = s->dev.config;
>      pci_conf[0x06] = 0x80;
> @@ -341,7 +355,8 @@ static int piix4_pm_initfn(PCIDevice *dev)
>      /* APM */
>      apm_init(&s->apm, apm_ctrl_changed, s);
>  
> -    register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
> +    portio_list_init(acpi_port_list, acpi_portio_list, s, "piix4-acpi");
> +    portio_list_add(acpi_port_list, get_system_io(), ACPI_DBG_IO_ADDR);

Use pci_address_space_io() instead.

>  
>      if (s->kvm_enabled) {
>          /* Mark SMM as already inited to prevent SMM from running.  KVM does 
> not
> @@ -354,8 +369,9 @@ static int piix4_pm_initfn(PCIDevice *dev)
>      pci_conf[0x90] = s->smb_io_base | 1;
>      pci_conf[0x91] = s->smb_io_base >> 8;
>      pci_conf[0xd2] = 0x09;
> -    register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
> -    register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
> +
> +    portio_list_init(piix4_port_list, piix4_portio_list, s, "piix4-acpi");
> +    portio_list_add(piix4_port_list, get_system_io(), s->smb_io_base);

pci_address_space_io()

>  
>      acpi_pm_tmr_init(&s->ar, pm_tmr_timer);
>      acpi_gpe_init(&s->ar, GPE_LEN);
> diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
> index afedaa4..aae82d5 100644
> --- a/hw/cirrus_vga.c
> +++ b/hw/cirrus_vga.c
> @@ -32,6 +32,7 @@
>  #include "console.h"
>  #include "vga_int.h"
>  #include "loader.h"
> +#include "exec-memory.h" 
>  

Remove.

>  /*
>   * TODO:
> @@ -2781,11 +2782,26 @@ static const MemoryRegionOps cirrus_linear_io_ops = {
>      },
>  };
>  
> +static const MemoryRegionPortio cirrus_portio_list[] = {
> +    { 0x04, 2, 1, .write = cirrus_vga_ioport_write,
> +    .read = cirrus_vga_ioport_read, }, /* 0x3b4 */
> +    { 0x0a, 1, 1, .write = cirrus_vga_ioport_write,
> +    .read = cirrus_vga_ioport_read, }, /* 0x3ba */
> +    { 0x10, 16, 1, .write = cirrus_vga_ioport_write,
> +    .read = cirrus_vga_ioport_read, }, /* 0x3c0 */
> +    { 0x24, 2, 1, .write = cirrus_vga_ioport_write,
> +    .read = cirrus_vga_ioport_read, }, /* 0x3d4 */
> +    { 0x2a, 1, 1, .write = cirrus_vga_ioport_write,
> +    .read = cirrus_vga_ioport_read, }, /* 0x3da */
> +    PORTIO_END_OF_LIST (),
> +};
> +
>  static void cirrus_init_common(CirrusVGAState * s, int device_id, int is_pci,
>                                 MemoryRegion *system_memory)
>  {
>      int i;
>      static int inited;
> +    PortioList *cirrus_port_list = g_new(PortioList, 1);
>  

Into CirrusVGAState.

>      if (!inited) {
>          inited = 1;
> @@ -2814,19 +2830,8 @@ static void cirrus_init_common(CirrusVGAState * s, int 
> device_id, int is_pci,
>              s->bustype = CIRRUS_BUSTYPE_ISA;
>      }
>  
> -    register_ioport_write(0x3c0, 16, 1, cirrus_vga_ioport_write, s);
> -
> -    register_ioport_write(0x3b4, 2, 1, cirrus_vga_ioport_write, s);
> -    register_ioport_write(0x3d4, 2, 1, cirrus_vga_ioport_write, s);
> -    register_ioport_write(0x3ba, 1, 1, cirrus_vga_ioport_write, s);
> -    register_ioport_write(0x3da, 1, 1, cirrus_vga_ioport_write, s);
> -
> -    register_ioport_read(0x3c0, 16, 1, cirrus_vga_ioport_read, s);
> -
> -    register_ioport_read(0x3b4, 2, 1, cirrus_vga_ioport_read, s);
> -    register_ioport_read(0x3d4, 2, 1, cirrus_vga_ioport_read, s);
> -    register_ioport_read(0x3ba, 1, 1, cirrus_vga_ioport_read, s);
> -    register_ioport_read(0x3da, 1, 1, cirrus_vga_ioport_read, s);
> +    portio_list_init(cirrus_port_list, cirrus_portio_list, s, "cirrus-io");
> +    portio_list_add(cirrus_port_list, get_system_io(), 0x3b0);
>  

Please pass either pci_address_space_io() or isa_io_address_space()
(you'll have to write the latter) to cirrus_init_common() from its
callers.  We really want to avoid get_system_io().

>      memory_region_init(&s->low_mem_container,
>                         "cirrus-lowmem-container",
> diff --git a/hw/pc.c b/hw/pc.c
> index 83a1b5b..eee5757 100644
> --- a/hw/pc.c
> +++ b/hw/pc.c
> @@ -592,6 +592,17 @@ int e820_add_entry(uint64_t address, uint64_t length, 
> uint32_t type)
>      return index;
>  }
>  
> +static const MemoryRegionPortio bochs_bios_portio_list[] = {
> +    { 0x000, 2, 2, .write = bochs_bios_write, }, /* 0x400 */
> +    { 0x002, 2, 1, .write = bochs_bios_write, }, /* 0x402 */
> +    { 0x100, 1, 1, .write = bochs_bios_write, }, /* 0x500 */
> +    { 0x101, 1, 1, .write = bochs_bios_write, }, /* 0x501 */
> +    { 0x101, 2, 2, .write = bochs_bios_write, }, /* 0x501 */
> +    { 0x103, 1, 1, .write = bochs_bios_write, }, /* 0x503  */
> +    { 0x8500, 1, 1, .write = bochs_bios_write, }, /* 0x8900 */
> +    PORTIO_END_OF_LIST(),
> +};
> +

Using offsets from 0x400 is... wierd.  It's not like there's a vga where
the ports are all bunched together.

>  
> +static const MemoryRegionPortio pc_basic_portio_list[] = {
> +    { 0x00, 1, 1, .write = ioport80_write, }, /* 0x80 */
> +    { 0x70, 1, 1, .write = ioportF0_write, }, /* 0xf0 */
> +    PORTIO_END_OF_LIST(),
> +};
> +
>  void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,
>                            ISADevice **rtc_state,
>                            ISADevice **floppy,
> @@ -1091,10 +1101,11 @@ void pc_basic_device_init(ISABus *isa_bus, qemu_irq 
> *gsi,
>      qemu_irq *a20_line;
>      ISADevice *i8042, *port92, *vmmouse, *pit;
>      qemu_irq *cpu_exit_irq;
> +    PortioList *pc_basic_port_list = g_new(PortioList, 1);
>  
> -    register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
> -
> -    register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
> +    portio_list_init(pc_basic_port_list, pc_basic_portio_list,
> +                     NULL, "pc-basic");
> +    portio_list_add(pc_basic_port_list, get_system_io(), 0x80);

isa_register_portio_list()

>  
> +static const MemoryRegionPortio serial_portio_list[] = {
> +    { 0x00, 8, 1, .write = serial_ioport_write,
> +        .read = serial_ioport_read, }, /* base */
> +    PORTIO_END_OF_LIST (),
> +};

This doesn't need to be a portio list, it can be a simple MemoryRegionOps.

> +
>  SerialState *serial_init(int base, qemu_irq irq, int baudbase,
>                           CharDriverState *chr)
>  {
>      SerialState *s;
> +    PortioList *serial_port_list = g_new(PortioList, 1);
>  

Into SerialState.

>      s = g_malloc0(sizeof(SerialState));
>  
> @@ -820,8 +828,9 @@ SerialState *serial_init(int base, qemu_irq irq, int 
> baudbase,
>  
>      vmstate_register(NULL, base, &vmstate_serial, s);
>  
> -    register_ioport_write(base, 8, 1, serial_ioport_write, s);
> -    register_ioport_read(base, 8, 1, serial_ioport_read, s);
> +    portio_list_init(serial_port_list, serial_portio_list, s, "serial-io");
> +    portio_list_add(serial_port_list, get_system_io(), base);
> +

Should we just remove serial_init() and replace it with the serial-isa
QOM class?

If not, just pass the io address space from the caller.

-- 
error compiling committee.c: too many arguments to function