[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [patch V5 3/5] FreeSCALE i.MX31 support: Timers
|
From: |
Peter Chubb |
|
Subject: |
[Qemu-devel] [patch V5 3/5] FreeSCALE i.MX31 support: Timers |
|
Date: |
Tue, 03 Apr 2012 11:55:18 +1000 |
|
User-agent: |
quilt/0.60-1 |
Implement the timers on the FreeScale i.MX31 SoC.
This is not a complete implementation, but gives enough for
Linux to boot and run. In particular external triggers, which are
not useful under QEMU, are not implemented.
Signed-off-by: Philip O'Sullivan <address@hidden>
Signed-off-by: Peter Chubb <address@hidden>
---
Makefile.target | 2
hw/imx_timer.c | 693 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 694 insertions(+), 1 deletion(-)
create mode 100644 hw/imx_timer.c
Index: qemu-working/hw/imx_timer.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ qemu-working/hw/imx_timer.c 2012-04-03 11:48:49.788710797 +1000
@@ -0,0 +1,693 @@
+/*
+ * IMX31 Timer
+ *
+ * Copyright (c) 2008 OK Labs
+ * Copyright (c) 2011 NICTA Pty Ltd
+ * Originally Written by Hans Jiang
+ * Updated by Peter Chubb
+ *
+ * This code is licenced under GPL version 2 or later. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include "hw.h"
+#include "qemu-timer.h"
+#include "ptimer.h"
+#include "sysbus.h"
+#include "imx.h"
+
+//#define DEBUG_TIMER 1
+#ifdef DEBUG_TIMER
+# define DPRINTF(fmt, args...) \
+ do { printf("imx_timer: " fmt , ##args); } while (0)
+#else
+# define DPRINTF(fmt, args...) do {} while (0)
+#endif
+
+/*
+ * Define to 1 for messages about attempts to
+ * access unimplemented registers or similar.
+ */
+#define DEBUG_IMPLEMENTATION 1
+#if DEBUG_IMPLEMENTATION
+# define IPRINTF(fmt, args...) \
+ do { fprintf(stderr, "imx_timer: " fmt, ##args); } while (0)
+#else
+# define IPRINTF(fmt, args...) do {} while (0)
+#endif
+
+/*
+ * GPT : General purpose timer
+ *
+ * This timer counts up continuously while it is enabled, resetting itself
+ * to 0 when it reaches TIMER_MAX (in freerun mode) or when it
+ * reaches the value of ocr1 (in periodic mode). WE simulate this using a
+ * QEMU ptimer counting down from ocr1 and reloading from ocr1 in
+ * periodic mode, or counting from ocr1 to zero, then TIMER_MAX - ocr1.
+ * waiting_rov is set when counting from TIMER_MAX.
+ *
+ * In the real hardware, there are three comparison registers that can
+ * trigger interrupts, and compare channel 1 can be used to
+ * force-reset the timer. However, this is a `bare-bones'
+ * implementation: only what Linux 3.x uses has been implemented
+ * (free-running timer from 0 to OCR1 or TIMER_MAX) .
+ */
+
+
+#define TIMER_MAX 0XFFFFFFFFUL
+
+/* Control register. Not all of these bits have any effect (yet) */
+#define GPT_CR_EN (1 << 0) /* GPT Enable */
+#define GPT_CR_ENMOD (1 << 1) /* GPT Enable Mode */
+#define GPT_CR_DBGEN (1 << 2) /* GPT Debug mode enable */
+#define GPT_CR_WAITEN (1 << 3) /* GPT Wait Mode Enable */
+#define GPT_CR_DOZEN (1 << 4) /* GPT Doze mode enable */
+#define GPT_CR_STOPEN (1 << 5) /* GPT Stop Mode Enable */
+#define GPT_CR_CLKSRC_SHIFT (6)
+#define GPT_CR_CLKSRC_MASK (0x7)
+
+#define GPT_CR_FRR (1 << 9) /* Freerun or Restart */
+#define GPT_CR_SWR (1 << 15) /* Software Reset */
+#define GPT_CR_IM1 (3 << 16) /* Input capture channel 1 mode (2 bits) */
+#define GPT_CR_IM2 (3 << 18) /* Input capture channel 2 mode (2 bits) */
+#define GPT_CR_OM1 (7 << 20) /* Output Compare Channel 1 Mode (3 bits) */
+#define GPT_CR_OM2 (7 << 23) /* Output Compare Channel 2 Mode (3 bits) */
+#define GPT_CR_OM3 (7 << 26) /* Output Compare Channel 3 Mode (3 bits) */
+#define GPT_CR_FO1 (1 << 29) /* Force Output Compare Channel 1 */
+#define GPT_CR_FO2 (1 << 30) /* Force Output Compare Channel 2 */
+#define GPT_CR_FO3 (1 << 31) /* Force Output Compare Channel 3 */
+
+#define GPT_SR_OF1 (1 << 0)
+#define GPT_SR_ROV (1 << 5)
+
+#define GPT_IR_OF1IE (1 << 0)
+#define GPT_IR_ROVIE (1 << 5)
+
+typedef struct {
+ SysBusDevice busdev;
+ ptimer_state *timer;
+ MemoryRegion iomem;
+ DeviceState *ccm;
+
+ uint32_t cr;
+ uint32_t pr;
+ uint32_t sr;
+ uint32_t ir;
+ uint32_t ocr1;
+ uint32_t cnt;
+
+ uint32_t waiting_rov;
+ qemu_irq irq;
+} IMXTimerGState;
+
+static const VMStateDescription vmstate_imx_timerg = {
+ .name = "imx-timerg",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(cr, IMXTimerGState),
+ VMSTATE_UINT32(pr, IMXTimerGState),
+ VMSTATE_UINT32(sr, IMXTimerGState),
+ VMSTATE_UINT32(ir, IMXTimerGState),
+ VMSTATE_UINT32(ocr1, IMXTimerGState),
+ VMSTATE_UINT32(cnt, IMXTimerGState),
+ VMSTATE_UINT32(waiting_rov, IMXTimerGState),
+ VMSTATE_PTIMER(timer, IMXTimerGState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const IMXClk imx_timerg_clocks[] = {
+ NOCLK, /* 000 No clock source */
+ IPG, /* 001 ipg_clk, 532MHz*/
+ IPG, /* 010 ipg_clk_highfreq */
+ NOCLK, /* 011 not defined */
+ CLK_32k, /* 100 ipg_clk_32k */
+ NOCLK, /* 101 not defined */
+ NOCLK, /* 110 not defined */
+ NOCLK, /* 111 not defined */
+};
+
+
+static void imx_timerg_set_freq(IMXTimerGState *s)
+{
+ int clksrc;
+ uint32_t freq;
+
+ clksrc = (s->cr >> GPT_CR_CLKSRC_SHIFT) & GPT_CR_CLKSRC_MASK;
+ freq = imx_timer_frequency(s->ccm, imx_timerg_clocks[clksrc]) / (1 +
s->pr);
+
+ DPRINTF("Setting gtimer clksrc %d to frequency %d\n", clksrc, freq);
+ if (freq) {
+ ptimer_set_freq(s->timer, freq);
+ }
+}
+
+static void imx_timerg_update(IMXTimerGState *s)
+{
+ uint32_t flags = s->sr & s->ir & (GPT_SR_OF1 | GPT_SR_ROV);
+
+ DPRINTF("g-timer SR: %s %s IR=%s %s, %s\n",
+ s->sr & GPT_SR_OF1 ? "OF1" : "",
+ s->sr & GPT_SR_ROV ? "ROV" : "",
+ s->ir & GPT_SR_OF1 ? "OF1" : "",
+ s->ir & GPT_SR_ROV ? "ROV" : "",
+ s->cr & GPT_CR_EN ? "CR_EN" : "Not Enabled");
+
+
+ qemu_set_irq(s->irq, (s->cr & GPT_CR_EN) && flags);
+}
+
+static uint32_t imx_timerg_update_counts(IMXTimerGState *s)
+{
+ uint64_t target = s->waiting_rov ? TIMER_MAX : s->ocr1;
+ uint64_t cnt = ptimer_get_count(s->timer);
+ s->cnt = target - cnt;
+ return s->cnt;
+}
+
+static void imx_timerg_reload(IMXTimerGState *s, uint32_t timeout)
+{
+ uint64_t diff_cnt;
+
+ if (!(s->cr & GPT_CR_FRR)) {
+ IPRINTF("IMX_timerg_reload --- called in reset-mode\n");
+ return;
+ }
+
+ /*
+ * For small timeouts, qemu sometimes runs too slow.
+ * Better deliver a late interrupt than none.
+ *
+ * In Reset mode (FRR bit clear)
+ * the ptimer reloads itself from OCR1;
+ * in free-running mode we need to fake
+ * running from 0 to ocr1 to TIMER_MAX
+ */
+ diff_cnt = timeout - s->cnt;
+ if (diff_cnt < 100) {
+ diff_cnt = 100;
+ }
+ ptimer_set_count(s->timer, diff_cnt);
+}
+
+static uint64_t imx_timerg_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ IMXTimerGState *s = (IMXTimerGState *)opaque;
+
+ DPRINTF("g-read(offset=%x)", offset >> 2);
+ switch (offset >> 2) {
+ case 0: /* Control Register */
+ DPRINTF(" cr = %x\n", s->cr);
+ return s->cr;
+
+ case 1: /* prescaler */
+ DPRINTF(" pr = %x\n", s->pr);
+ return s->pr;
+
+ case 2: /* Status Register */
+ DPRINTF(" sr = %x\n", s->sr);
+ return s->sr;
+
+ case 3: /* Interrupt Register */
+ DPRINTF(" ir = %x\n", s->ir);
+ return s->ir;
+
+ case 4: /* Output Compare Register 1 */
+ DPRINTF(" ocr1 = %x\n", s->ocr1);
+ return s->ocr1;
+
+
+ case 9: /* cnt */
+ imx_timerg_update_counts(s);
+ DPRINTF(" cnt = %x\n", s->cnt);
+ return s->cnt;
+ }
+
+ IPRINTF("imx_timerg_read: Bad offset %x\n",
+ (int)offset >> 2);
+ return 0;
+}
+
+static void imx_timerg_reset(DeviceState *dev)
+{
+ IMXTimerGState *s = container_of(dev, IMXTimerGState, busdev.qdev);
+
+ /*
+ * Soft reset doesn't touch some bits; hard reset clears them
+ */
+ s->cr &= ~(GPT_CR_EN|GPT_CR_DOZEN|GPT_CR_WAITEN|GPT_CR_DBGEN);
+ s->sr = 0;
+ s->pr = 0;
+ s->ir = 0;
+ s->cnt = 0;
+ s->ocr1 = TIMER_MAX;
+ ptimer_stop(s->timer);
+ ptimer_set_limit(s->timer, TIMER_MAX, 1);
+ imx_timerg_set_freq(s);
+}
+
+static void imx_timerg_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ IMXTimerGState *s = (IMXTimerGState *)opaque;
+ DPRINTF("g-write(offset=%x, value = 0x%x)\n", (unsigned int)offset >> 2,
+ (unsigned int)value);
+
+ switch (offset >> 2) {
+ case 0: {
+ uint32_t oldcr = s->cr;
+ /* CR */
+ if (value & GPT_CR_SWR) { /* force reset */
+ value &= ~GPT_CR_SWR;
+ imx_timerg_reset(&s->busdev.qdev);
+ imx_timerg_update(s);
+ }
+
+ s->cr = value & ~0x7c00;
+ imx_timerg_set_freq(s);
+ if ((oldcr ^ value) & GPT_CR_EN) {
+ if (value & GPT_CR_EN) {
+ if (value & GPT_CR_ENMOD) {
+ ptimer_set_count(s->timer, s->ocr1);
+ s->cnt = 0;
+ }
+ ptimer_run(s->timer,
+ (value & GPT_CR_FRR) && (s->ocr1 != TIMER_MAX));
+ } else {
+ ptimer_stop(s->timer);
+ };
+ }
+ return;
+ }
+
+ case 1: /* Prescaler */
+ s->pr = value & 0xfff;
+ imx_timerg_set_freq(s);
+ return;
+
+ case 2: /* SR */
+ /*
+ * No point in implementing the status register bits to do with
+ * external interrupt sources.
+ */
+ value &= GPT_SR_OF1 | GPT_SR_ROV;
+ s->sr &= ~value;
+ imx_timerg_update(s);
+ return;
+
+ case 3: /* IR -- interrupt register */
+ s->ir = value & 0x3f;
+ imx_timerg_update(s);
+ return;
+
+ case 4: /* OCR1 -- output compare register */
+ /* In non-freerun mode, reset count when this register is written */
+ if (!(s->cr & GPT_CR_FRR)) {
+ s->waiting_rov = 0;
+ ptimer_set_limit(s->timer, value, 1);
+ } else {
+ imx_timerg_update_counts(s);
+ if (value > s->cnt) {
+ s->waiting_rov = 0;
+ imx_timerg_reload(s, value);
+ } else {
+ s->waiting_rov = 1;
+ imx_timerg_reload(s, TIMER_MAX - s->cnt);
+ }
+ }
+ s->ocr1 = value;
+ return;
+
+ default:
+ IPRINTF("imx_timerg_write: Bad offset %x\n",
+ (int)offset >> 2);
+ }
+}
+
+static void imx_timerg_timeout(void *opaque)
+{
+ IMXTimerGState *s = (IMXTimerGState *)opaque;
+
+ DPRINTF("imx_timerg_timeout, waiting rov=%d\n", s->waiting_rov);
+ if (s->cr & GPT_CR_FRR) {
+ /*
+ * Free running timer from 0 -> TIMERMAX
+ * Generates interrupt at TIMER_MAX and at cnt==ocr1
+ * If ocr1 == TIMER_MAX, then no need to reload timer.
+ */
+ if (s->ocr1 == TIMER_MAX) {
+ DPRINTF("s->ocr1 == TIMER_MAX, FRR\n");
+ s->sr |= GPT_SR_OF1 | GPT_SR_ROV;
+ imx_timerg_update(s);
+ return;
+ }
+
+ if (s->waiting_rov) {
+ /*
+ * We were waiting for cnt==TIMER_MAX
+ */
+ s->sr |= GPT_SR_ROV;
+ s->waiting_rov = 0;
+ s->cnt = 0;
+ imx_timerg_reload(s, s->ocr1);
+ } else {
+ /* Must have got a cnt==ocr1 timeout. */
+ s->sr |= GPT_SR_OF1;
+ s->cnt = s->ocr1;
+ s->waiting_rov = 1;
+ imx_timerg_reload(s, TIMER_MAX);
+ }
+ imx_timerg_update(s);
+ return;
+ }
+
+ s->sr |= GPT_SR_OF1;
+ imx_timerg_update(s);
+}
+
+static const MemoryRegionOps imx_timerg_ops = {
+ .read = imx_timerg_read,
+ .write = imx_timerg_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+
+static int imx_timerg_init(SysBusDevice *dev)
+{
+ IMXTimerGState *s = FROM_SYSBUS(IMXTimerGState, dev);
+ QEMUBH *bh;
+
+ sysbus_init_irq(dev, &s->irq);
+ memory_region_init_io(&s->iomem, &imx_timerg_ops,
+ s, "imxg-timer",
+ 0x00001000);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ bh = qemu_bh_new(imx_timerg_timeout, s);
+ s->timer = ptimer_init(bh);
+
+ /* Hard reset resets extra bits in CR */
+ s->cr = 0;
+ return 0;
+}
+
+
+
+/*
+ * EPIT: Enhanced periodic interrupt timer
+ */
+
+#define CR_EN (1 << 0)
+#define CR_ENMOD (1 << 1)
+#define CR_OCIEN (1 << 2)
+#define CR_RLD (1 << 3)
+#define CR_PRESCALE_SHIFT (4)
+#define CR_PRESCALE_MASK (0xfff)
+#define CR_SWR (1 << 16)
+#define CR_IOVW (1 << 17)
+#define CR_DBGEN (1 << 18)
+#define CR_EPIT (1 << 19)
+#define CR_DOZEN (1 << 20)
+#define CR_STOPEN (1 << 21)
+#define CR_CLKSRC_SHIFT (24)
+#define CR_CLKSRC_MASK (0x3 << CR_CLKSRC_SHIFT)
+
+
+/*
+ * Exact clock frequencies vary from board to board.
+ * These are typical.
+ */
+static const IMXClk imx_timerp_clocks[] = {
+ 0, /* disabled */
+ IPG, /* ipg_clk, ~532MHz */
+ IPG, /* ipg_clk_highfreq */
+ CLK_32k, /* ipg_clk_32k -- ~32kHz */
+};
+
+typedef struct {
+ SysBusDevice busdev;
+ ptimer_state *timer;
+ MemoryRegion iomem;
+ DeviceState *ccm;
+
+ uint32_t cr;
+ uint32_t lr;
+ uint32_t cmp;
+
+ uint32_t freq;
+ int int_level;
+ qemu_irq irq;
+} IMXTimerPState;
+
+/*
+ * Update interrupt status
+ */
+static void imx_timerp_update(IMXTimerPState *s)
+{
+ if (s->int_level && (s->cr & CR_OCIEN)) {
+ qemu_irq_raise(s->irq);
+ } else {
+ qemu_irq_lower(s->irq);
+ }
+}
+
+static void imx_timerp_reset(DeviceState *dev)
+{
+ IMXTimerPState *s = container_of(dev, IMXTimerPState, busdev.qdev);
+
+ s->cr = 0;
+ s->lr = TIMER_MAX;
+ s->int_level = 0;
+ s->cmp = 0;
+ ptimer_stop(s->timer);
+ ptimer_set_count(s->timer, TIMER_MAX);
+}
+
+static uint64_t imx_timerp_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ IMXTimerPState *s = (IMXTimerPState *)opaque;
+
+ DPRINTF("p-read(offset=%x)", offset >> 2);
+ switch (offset >> 2) {
+ case 0: /* Control Register */
+ DPRINTF("cr %x\n", s->cr);
+ return s->cr;
+
+ case 1: /* Status Register */
+ DPRINTF("int_level %x\n", s->int_level);
+ return s->int_level;
+
+ case 2: /* LR - ticks*/
+ DPRINTF("lr %x\n", s->lr);
+ return s->lr;
+
+ case 3: /* CMP */
+ DPRINTF("cmp %x\n", s->cmp);
+ return s->cmp;
+
+ case 4: /* CNT */
+ return ptimer_get_count(s->timer);
+ }
+ IPRINTF("imx_timerp_read: Bad offset %x\n",
+ (int)offset >> 2);
+ return 0;
+}
+
+static void set_timerp_freq(IMXTimerPState *s)
+{
+ int clksrc;
+ unsigned prescaler;
+ uint32_t freq;
+
+ clksrc = (s->cr & CR_CLKSRC_MASK) >> CR_CLKSRC_SHIFT;
+ prescaler = 1 + ((s->cr >> CR_PRESCALE_SHIFT) & CR_PRESCALE_MASK);
+ freq = imx_timer_frequency(s->ccm, imx_timerp_clocks[clksrc]) / prescaler;
+
+ s->freq = freq;
+ DPRINTF("Setting ptimer frequency to %u\n", freq);
+
+ if (freq) {
+ ptimer_set_freq(s->timer, freq);
+ }
+}
+
+static void imx_timerp_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ IMXTimerPState *s = (IMXTimerPState *)opaque;
+ DPRINTF("p-write(offset=%x, value = %x)\n", (unsigned int)offset >> 2,
+ (unsigned int)value);
+
+ switch (offset >> 2) {
+ case 0: /* CR */
+ if (value & CR_SWR) {
+ imx_timerp_reset(&s->busdev.qdev);
+ value &= ~CR_SWR;
+ }
+ s->cr = value & 0x03ffffff;
+ set_timerp_freq(s);
+
+ if (s->freq && (s->cr & CR_EN)) {
+ if (!(s->cr & CR_ENMOD)) {
+ ptimer_set_count(s->timer, s->lr);
+ }
+ ptimer_run(s->timer, 0);
+ } else {
+ ptimer_stop(s->timer);
+ }
+ break;
+
+ case 1: /* SR - ACK*/
+ s->int_level = 0;
+ imx_timerp_update(s);
+ break;
+
+ case 2: /* LR - set ticks */
+ s->lr = value;
+ /*
+ * Artificially limit tick rate to something
+ * achievable under QEMU. Otherwise, QEMU spends all
+ * its time generating timer interrupts, and there
+ * is no forward progress.
+ * About ten microseconds is the fastest that really works.
+ */
+ if ((value * 1000000)/s->freq < 10) {
+ value = 10*1000000/s->freq;
+ }
+ ptimer_set_limit(s->timer, value, !!(s->cr & CR_IOVW));
+ break;
+
+ case 3: /* CMP */
+ s->cmp = value;
+ if (value) {
+ IPRINTF(
+ "Values for EPIT comparison other than zero not supported\n"
+ );
+ }
+ break;
+
+ default:
+ IPRINTF("imx_timerp_write: Bad offset %x\n",
+ (int)offset >> 2);
+ }
+}
+
+static void imx_timerp_tick(void *opaque)
+{
+ IMXTimerPState *s = (IMXTimerPState *)opaque;
+
+ DPRINTF("imxp tick\n");
+ if (!(s->cr & CR_RLD)) {
+ ptimer_set_count(s->timer, TIMER_MAX);
+ }
+ s->int_level = 1;
+ imx_timerp_update(s);
+}
+
+static const MemoryRegionOps imx_timerp_ops = {
+ .read = imx_timerp_read,
+ .write = imx_timerp_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const VMStateDescription vmstate_imx_timerp = {
+ .name = "imx-timerp",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(cr, IMXTimerPState),
+ VMSTATE_UINT32(lr, IMXTimerPState),
+ VMSTATE_UINT32(cmp, IMXTimerPState),
+ VMSTATE_UINT32(freq, IMXTimerPState),
+ VMSTATE_INT32(int_level, IMXTimerPState),
+ VMSTATE_PTIMER(timer, IMXTimerPState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static int imx_timerp_init(SysBusDevice *dev)
+{
+ IMXTimerPState *s = FROM_SYSBUS(IMXTimerPState, dev);
+ QEMUBH *bh;
+
+ DPRINTF("imx_timerp_init\n");
+
+ sysbus_init_irq(dev, &s->irq);
+ memory_region_init_io(&s->iomem, &imx_timerp_ops,
+ s, "imxp-timer",
+ 0x00001000);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ bh = qemu_bh_new(imx_timerp_tick, s);
+ s->timer = ptimer_init(bh);
+
+ return 0;
+}
+
+void imx_timer_create(const char * const name,
+ const target_phys_addr_t addr,
+ qemu_irq irq,
+ DeviceState *ccm)
+{
+ IMXTimerGState *gp;
+ IMXTimerPState *pp;
+ DeviceState *dev;
+
+ dev = sysbus_create_simple(name, addr, irq);
+ if (strcmp(name, "imx_timerp") == 0) {
+ pp = container_of(dev, IMXTimerPState, busdev.qdev);
+ pp->ccm = ccm;
+ } else {
+ gp = container_of(dev, IMXTimerGState, busdev.qdev);
+ gp->ccm = ccm;
+ }
+
+}
+
+static void imx_timerg_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+ k->init = imx_timerg_init;
+ dc->vmsd = &vmstate_imx_timerg;
+ dc->reset = imx_timerg_reset;
+ dc->desc = "i.MX general timer";
+}
+
+static void imx_timerp_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+ k->init = imx_timerp_init;
+ dc->vmsd = &vmstate_imx_timerp;
+ dc->reset = imx_timerp_reset;
+ dc->desc = "i.MX periodic timer";
+}
+
+static TypeInfo imx_timerp_info = {
+ .name = "imx_timerp",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IMXTimerPState),
+ .class_init = imx_timerp_class_init,
+};
+
+static TypeInfo imx_timerg_info = {
+ .name = "imx_timerg",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(IMXTimerGState),
+ .class_init = imx_timerg_class_init,
+};
+
+static void imx_timer_register_types(void)
+{
+ type_register_static(&imx_timerp_info);
+ type_register_static(&imx_timerg_info);
+}
+
+type_init(imx_timer_register_types)
Index: qemu-working/Makefile.target
===================================================================
--- qemu-working.orig/Makefile.target 2012-04-03 11:48:49.712710611 +1000
+++ qemu-working/Makefile.target 2012-04-03 11:48:49.788710797 +1000
@@ -393,7 +393,7 @@ obj-arm-y += vexpress.o
obj-arm-y += strongarm.o
obj-arm-y += collie.o
obj-arm-y += pl041.o lm4549.o
-obj-arm-y += imx_serial.o imx_ccm.o
+obj-arm-y += imx_serial.o imx_ccm.o imx_timer.o
obj-arm-$(CONFIG_FDT) += device_tree.o
obj-sh4-y = shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o