[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCHv2] piix: fix up/down races + document
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCHv2] piix: fix up/down races + document |
Date: |
Thu, 29 Mar 2012 21:38:58 +0200 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Thu, Mar 29, 2012 at 10:53:38AM -0600, Alex Williamson wrote:
> On Thu, 2012-03-29 at 14:51 +0200, Michael S. Tsirkin wrote:
> > piix acpi interface suffers from the following 2 issues:
> >
> > 1.
> > - delete device a
> > - quickly add device b in another slot
> >
> > if we do this before guest reads the down register,
> > the down event is discarded and device will never
> > be deleted.
> >
> > 2.
> > - delete device a
> > - quickly reset before guest can respond
> >
> > interrupt is reset and guest will never eject the device.
> >
> > To fix this, we implement two changes:
> >
> > 1. Add two new registers:
> > CLR_UP
> > CLR_DOWN
> > bios will now write to these the value it read from UP/DOWN
> >
> > 2. on reset, remove all devices which have DOWN bit set
> >
> > For compatibility with old guests, we also clear
> > the DOWN bit on write to EJ0 for a device.
> >
> > This patch also adds more detailed documentation
> > for the ACPI interface, including the semantics
> > of both old and new registers.
> >
> > Signed-off-by: Michael S. Tsirkin <address@hidden>
> > ---
> >
> > Changes from v1:
> > - tweaked a comment about clearing down register on reset
> > - documentation update
> >
> > docs/specs/acpi_pci_hotplug.txt | 68 +++++++++++++++++++++++++++++++----
> > hw/acpi_piix4.c | 75
> > +++++++++++++++++++++++++++++++-------
> > 2 files changed, 121 insertions(+), 22 deletions(-)
> >
> > diff --git a/docs/specs/acpi_pci_hotplug.txt
> > b/docs/specs/acpi_pci_hotplug.txt
> > index f0f74a7..a8398f9 100644
> > --- a/docs/specs/acpi_pci_hotplug.txt
> > +++ b/docs/specs/acpi_pci_hotplug.txt
> > @@ -7,31 +7,83 @@ describes the interface between QEMU and the ACPI BIOS.
> > ACPI GPE block (IO ports 0xafe0-0xafe3, byte access):
> > -----------------------------------------
> >
> > -Generic ACPI GPE block. Bit 1 (GPE.1) used to notify PCI hotplug/eject
> > +Generic ACPI GPE block. Bit 1 (GPE.1) is used to notify PCI
> > hotplug/hotunplug
> > event to ACPI BIOS, via SCI interrupt.
> >
> > -PCI slot injection notification pending (IO port 0xae00-0xae03, 4-byte
> > access):
> > +Semantics: this event occurs each time a bit in either Pending PCI slot
> > +injection notification or Pending PCI slot removal notification registers
> > +changes status from 0 to 1.
> > +
> > +Pending PCI slot injection notification (IO port 0xae00-0xae03, 4-byte
> > access):
> > ---------------------------------------------------------------
> > -Slot injection notification pending. One bit per slot.
> > +Slot injection notification is pending. One bit per slot.
> > +Guests should not write this register, in practice the value
> > +written overwrites the register.
>
> Sorry if I'm behind on the discussion, but why do we need to define
> 0xae0c & 0xae10 below for write-only access when these registers (0xae00
> & 0xae04) are effectively read-only (yes, write is there, but it should
> *never* be used in the current implementation)? Thanks,
>
> Alex
Because otherwise a new bios will be broken on an old qemu.
We should have made the registers read-only in the old qemu
then we won't have the problem now.
Yes, it's probably not a big deal, but it's just as easy
to create a new register as it is to redefine the old one.
> > Read by ACPI BIOS GPE.1 handler to notify OS of injection
> > events.
> >
> > -PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access):
> > +Semantics: after a slot is populated by hotplug, it is immediately enabled
> > +and a bit in this register is set.
> > +Reset value: 0
> > +
> > +Pending PCI slot removal notification (IO port 0xae04-0xae07, 4-byte
> > access):
> > -----------------------------------------------------
> > -Slot removal notification pending. One bit per slot.
> > +Slot removal notification is pending. One bit per slot.
> > +Guests should not write this register, in practice the value
> > +written overwrites the register.
> >
> > Read by ACPI BIOS GPE.1 handler to notify OS of removal
> > events.
> >
> > +Semantics: upon hotunplug request, a bit in this register is set
> > +and the OSPM is notified about hotunplug request, but a slot remains
> > enabled
> > +until eject.
> > +Reset value: 0
> > +
> > PCI device eject (IO port 0xae08-0xae0b, 4-byte access):
> > ----------------------------------------
> >
> > Used by ACPI BIOS _EJ0 method to request device removal. One bit per slot.
> > -Reads return 0.
> > +Guests should not read this register. In practice reads return 0.
> > +
> > +Semantics: selected hotunpluggable slots are disabled and powered off.
> > +Has no effect on non-hotunpluggable slots.
> > +
> > +For compatibility with old BIOS, writes to this register
> > +clear bits in pending slot injection notification register.
> >
> > PCI removability status (IO port 0xae0c-0xae0f, 4-byte access):
> > -----------------------------------------------
> >
> > -Used by ACPI BIOS _RMV method to indicate removability status to OS. One
> > -bit per slot.
> > +Used by ACPI BIOS _RMV method to detect removability status
> > +and report to OS. One bit per slot.
> > +Guests should not write this register, in practice the value
> > +written is discarded.
> > +
> > +Semantics: selected slots support hotplug. Contents of this register
> > +do not change while guest is running.
> > +
> > +Clear PCI slot injection notification (IO port 0xae10-0xae14, 4-byte
> > access):
> > +---------------------------------------------------------------
> > +Clears bits in pending slot injection notification register. One bit per
> > slot.
> > +Guests should not read this register. In practice reads return 0.
> > +
> > +Written to by ACPI BIOS GPE.1 handler after reading the
> > +pending slot injection notification register and before
> > +notifying OS of injection events.
> > +
> > +Semantics: used to acknowledge the injection notification.
> > +Does not affect slot status.
> > +
> > +Clear PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access):
> > +-----------------------------------------------------
> > +Clears bits in slot removal notification pending register. One bit per
> > slot.
> > +Guests should not read this register. In practice reads return 0.
> > +
> > +Written to by ACPI BIOS GPE.1 handler after reading the
> > +pending slot removal notification register and before
> > +notifying OS of removal events.
> > +
> > +Semantics: used to acknowledge the hotunplug request.
> > +Does not affect slot status.
> > diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
> > index 797ed24..50553fd 100644
> > --- a/hw/acpi_piix4.c
> > +++ b/hw/acpi_piix4.c
> > @@ -43,6 +43,8 @@
> > #define PCI_BASE 0xae00
> > #define PCI_EJ_BASE 0xae08
> > #define PCI_RMV_BASE 0xae0c
> > +#define PCI_CLR_UP_BASE 0xae10
> > +#define PCI_CLR_DOWN_BASE 0xae14
> >
> > #define PIIX4_PCI_HOTPLUG_STATUS 2
> >
> > @@ -287,6 +289,28 @@ static void piix4_update_hotplug(PIIX4PMState *s)
> > }
> > }
> >
> > +static void acpi_piix_eject_slot(PIIX4PMState *s, unsigned slots)
> > +{
> > + DeviceState *qdev, *next;
> > + BusState *bus = qdev_get_parent_bus(&s->dev.qdev);
> > + int slot = ffs(slots) - 1;
> > +
> > + /*
> > + * Clear DOWN register - this is good for a case where guest can't
> > + * write to CLR_DOWN because of VM reset, and for compatibility with
> > + * old guests which do not have CLR_DOWN.
> > + */
> > + s->pci0_status.down &= ~(1U << slot);
> > +
> > + QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
> > + PCIDevice *dev = PCI_DEVICE(qdev);
> > + PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
> > + if (PCI_SLOT(dev->devfn) == slot && !pc->no_hotplug) {
> > + qdev_free(qdev);
> > + }
> > + }
> > +}
> > +
> > static void piix4_reset(void *opaque)
> > {
> > PIIX4PMState *s = opaque;
> > @@ -302,6 +326,19 @@ static void piix4_reset(void *opaque)
> > pci_conf[0x5B] = 0x02;
> > }
> > piix4_update_hotplug(s);
> > + /*
> > + * Guest lost remove events if any.
> > + * As it's being reset it's safe to remove the device now.
> > + */
> > + while (s->pci0_status.down) {
> > + acpi_piix_eject_slot(s, s->pci0_status.down);
> > + }
> > + /*
> > + * Guest lost add events if any.
> > + * As it's being reset and will rescan the bus we can discard
> > + * past events now.
> > + */
> > + s->pci0_status.up = 0;
> > }
> >
> > static void piix4_powerdown(void *opaque, int irq, int power_failing)
> > @@ -490,22 +527,31 @@ static uint32_t pciej_read(void *opaque, uint32_t
> > addr)
> >
> > static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
> > {
> > - BusState *bus = opaque;
> > - DeviceState *qdev, *next;
> > - int slot = ffs(val) - 1;
> > + PIIX4PMState *s = opaque;
> >
> > - QTAILQ_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
> > - PCIDevice *dev = PCI_DEVICE(qdev);
> > - PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
> > - if (PCI_SLOT(dev->devfn) == slot && !pc->no_hotplug) {
> > - qdev_free(qdev);
> > - }
> > + if (val) {
> > + acpi_piix_eject_slot(s, val);
> > }
> >
> > -
> > PIIX4_DPRINTF("pciej write %x <== %d\n", addr, val);
> > }
> >
> > +static void pci_clr_up_write(void *opaque, uint32_t addr, uint32_t val)
> > +{
> > + PIIX4PMState *s = opaque;
> > + s->pci0_status.up &= ~val;
> > +
> > + PIIX4_DPRINTF("pci_clr_up write %x <== %d\n", addr, val);
> > +}
> > +
> > +static void pci_clr_down_write(void *opaque, uint32_t addr, uint32_t val)
> > +{
> > + PIIX4PMState *s = opaque;
> > + s->pci0_status.down &= ~val;
> > +
> > + PIIX4_DPRINTF("pci_clr_down write %x <== %d\n", addr, val);
> > +}
> > +
> > static uint32_t pcirmv_read(void *opaque, uint32_t addr)
> > {
> > PIIX4PMState *s = opaque;
> > @@ -532,12 +578,15 @@ static void piix4_acpi_system_hot_add_init(PCIBus
> > *bus, PIIX4PMState *s)
> > register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
> > register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, pci0_status);
> >
> > - register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
> > - register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
> > + register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, s);
> > + register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, s);
> >
> > register_ioport_write(PCI_RMV_BASE, 4, 4, pcirmv_write, s);
> > register_ioport_read(PCI_RMV_BASE, 4, 4, pcirmv_read, s);
> >
> > + register_ioport_write(PCI_CLR_UP_BASE, 4, 4, pci_clr_up_write, s);
> > + register_ioport_write(PCI_CLR_DOWN_BASE, 4, 4, pci_clr_down_write, s);
> > +
> > pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
> > }
> >
> > @@ -567,8 +616,6 @@ static int piix4_device_hotplug(DeviceState *qdev,
> > PCIDevice *dev,
> > return 0;
> > }
> >
> > - s->pci0_status.up = 0;
> > - s->pci0_status.down = 0;
> > if (state == PCI_HOTPLUG_ENABLED) {
> > enable_device(s, slot);
> > } else {
>
>