[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] usb: queue can have async packets too
From: |
Erik Rull |
Subject: |
Re: [Qemu-devel] [PATCH] usb: queue can have async packets too |
Date: |
Mon, 5 Mar 2012 11:22:26 +0100 (CET) |
On March 2, 2012 at 3:15 PM Gerd Hoffmann <address@hidden> wrote:
> > But: This + the latest GIT master causes again my problems with the
>
> With or without this one:
>
> commit 5ca2358ac895139e624881c5b3bf3095d3cc4515
> Date: Wed Feb 29 09:11:00 2012 -0600
>
> Merge remote-tracking branch 'kraxel/usb.39' into staging
>
> ?
>
> cheers,
> Gerd
>
>
Hi Gerd,
I'm really sorry, but after rechecking my versions that worked (doing git
checkouts there) I don't get it working again :-(
I have no idea what's wrong now...
The startup issue is existing now again on all versions I tested - maybe
this was just a side effect during the bisect?
So finally - with the current master + your patch the assertion failed is
fixed but the startup issue seems to remain.
Any ideas how I could help you debugging this issue?
I tested it on Windows XP and a plain vanilla kernel 2.6.29.12 linux system
- both show the same behavior.
Attached the usb-filtered-dmesg from my guest linux booting up.
If you need further information, please let me know!
The usb 1-1 is my USB msd that gets not detected properly...
Thanks a lot!
Best regards,
Erik
172.17.17.183 ~ # dmesg | grep "usb" -i
[ 0.151096] usbcore: registered new interface driver usbfs
[ 0.151591] usbcore: registered new interface driver hub
[ 0.152031] usbcore: registered new device driver usb
[ 0.841074] usbmon: debugfs is not available
[ 0.841506] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.843518] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 1.170948] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.171532] usb usb1: configuration #1 chosen from 1 choice
[ 1.172080] hub 1-0:1.0: USB hub found
[ 1.173100] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.173602] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.175625] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 1.177092] usb usb2: configuration #1 chosen from 1 choice
[ 1.177599] hub 2-0:1.0: USB hub found
[ 1.180072] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 1.181477] usb usb3: configuration #1 chosen from 1 choice
[ 1.182025] hub 3-0:1.0: USB hub found
[ 1.184472] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 1.185872] usb usb4: configuration #1 chosen from 1 choice
[ 1.186419] hub 4-0:1.0: USB hub found
[ 1.187396] Initializing USB Mass Storage driver...
[ 1.187876] usbcore: registered new interface driver usb-storage
[ 1.188392] USB Mass Storage support registered.
[ 1.188852] usbcore: registered new interface driver ums-datafab
[ 1.189394] usbcore: registered new interface driver ums-freecom
[ 1.189882] usbcore: registered new interface driver ums-isd200
[ 1.190415] usbcore: registered new interface driver ums-jumpshot
[ 1.190961] usbcore: registered new interface driver ums-sddr09
[ 1.191447] usbcore: registered new interface driver ums-sddr55
[ 1.192015] usbcore: registered new interface driver usbserial
[ 1.192506] USB Serial support registered for generic
[ 1.193031] usbcore: registered new interface driver usbserial_generic
[ 1.193510] usbserial: USB Serial Driver core
[ 1.194013] USB Serial support registered for cp210x
[ 1.194482] usbcore: registered new interface driver cp210x
[ 1.197268] USB Serial support registered for pl2303
[ 1.197741] usbcore: registered new interface driver pl2303
[ 1.198255] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 1.206945] usbcore: registered new interface driver usbhid
[ 1.206945] usbhid: v2.6:USB HID core driver
[ 1.808963] usb 1-1: new high speed USB device using ehci_hcd and
address 2
[ 2.182204] usb 1-1: configuration #1 chosen from 1 choice
[ 2.183150] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2.184084] usb-storage: device found at 2
[ 2.184085] usb-storage: waiting for device to settle before scanning
[ 2.545015] usb 2-2: new full speed USB device using uhci_hcd and
address 2
[ 2.895181] usb 2-2: configuration #1 chosen from 1 choice
[ 2.911124] input: QEMU 1.0.50 QEMU USB Tablet as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[ 2.912007] generic-usb 0003:0627:0001.0001: input: USB HID v0.01
Pointer [QEMU 1.0.50 QEMU USB Tablet] on usb-0000:00:1d.0-2/input0
[ 7.296026] usb 1-1: reset high speed USB device using ehci_hcd and
address 2
[ 7.531025] usb 1-1: reset high speed USB device using ehci_hcd and
address 2
[ 7.767025] usb 1-1: reset high speed USB device using ehci_hcd and
address 2
[ 8.003025] usb 1-1: reset high speed USB device using ehci_hcd and
address 2
[ 8.129208] usb-storage: device scan complete
172.17.17.183 ~ #