[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c
|
From: |
Anthony Liguori |
|
Subject: |
[Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c |
|
Date: |
Thu, 26 Jan 2012 13:00:46 -0600 |
A long time ago, there was a grand plan to merge q35 chipset support. The start
of that series was a refactoring of pc.c which split a bunch of the "common"
functionality into a separate file that could be shared by the two.
But q35 never got merged and the refactoring, in retrospect, just made things
worse. Making things proper objects and using composition is the right way
to share common devices.
By pulling these files back together, we can start to fix some of this mess.
Signed-off-by: Anthony Liguori <address@hidden>
---
Makefile.target | 1 -
hw/pc.c | 644 +++++++++++++++++++++++++++++++++++++++++++++++++++
hw/pc_piix.c | 686 -------------------------------------------------------
3 files changed, 644 insertions(+), 687 deletions(-)
delete mode 100644 hw/pc_piix.c
diff --git a/Makefile.target b/Makefile.target
index 2c763a1..63afaf9 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -235,7 +235,6 @@ obj-i386-y += sga.o apic_common.o apic.o ioapic_common.o
ioapic.o piix_pci.o
obj-i386-y += vmport.o
obj-i386-y += pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
-obj-i386-y += pc_piix.o
obj-i386-$(CONFIG_KVM) += kvm/clock.o kvm/apic.o kvm/i8259.o kvm/ioapic.o
obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
diff --git a/hw/pc.c b/hw/pc.c
index 7f3aa65..3d40aca 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -44,6 +44,12 @@
#include "ui/qemu-spice.h"
#include "memory.h"
#include "exec-memory.h"
+#include "kvm/clock.h"
+#include "xen.h"
+#include "arch_init.h"
+#include "usb-uhci.h"
+#include "smbus.h"
+#include "boards.h"
/* output Bochs bios info messages */
//#define DEBUG_BIOS
@@ -75,6 +81,8 @@
#define E820_NR_ENTRIES 16
+#define MAX_IDE_BUS 2
+
struct e820_entry {
uint64_t address;
uint64_t length;
@@ -86,6 +94,10 @@ struct e820_table {
struct e820_entry entry[E820_NR_ENTRIES];
} QEMU_PACKED __attribute((__aligned__(4)));
+static const int ide_iobase[MAX_IDE_BUS] = { 0x1f0, 0x170 };
+static const int ide_iobase2[MAX_IDE_BUS] = { 0x3f6, 0x376 };
+static const int ide_irq[MAX_IDE_BUS] = { 14, 15 };
+
static struct e820_table e820_table;
struct hpet_fw_config hpet_cfg = {.count = UINT8_MAX};
@@ -1210,3 +1222,635 @@ void pc_pci_device_init(PCIBus *pci_bus)
pci_create_simple(pci_bus, -1, "lsi53c895a");
}
}
+
+static void kvm_piix3_setup_irq_routing(bool pci_enabled)
+{
+#ifdef CONFIG_KVM
+ KVMState *s = kvm_state;
+ int ret, i;
+
+ if (kvm_check_extension(s, KVM_CAP_IRQ_ROUTING)) {
+ for (i = 0; i < 8; ++i) {
+ if (i == 2) {
+ continue;
+ }
+ kvm_irqchip_add_route(s, i, KVM_IRQCHIP_PIC_MASTER, i);
+ }
+ for (i = 8; i < 16; ++i) {
+ kvm_irqchip_add_route(s, i, KVM_IRQCHIP_PIC_SLAVE, i - 8);
+ }
+ if (pci_enabled) {
+ for (i = 0; i < 24; ++i) {
+ if (i == 0) {
+ kvm_irqchip_add_route(s, i, KVM_IRQCHIP_IOAPIC, 2);
+ } else if (i != 2) {
+ kvm_irqchip_add_route(s, i, KVM_IRQCHIP_IOAPIC, i);
+ }
+ }
+ }
+ ret = kvm_irqchip_commit_routes(s);
+ if (ret < 0) {
+ hw_error("KVM IRQ routing setup failed");
+ }
+ }
+#endif /* CONFIG_KVM */
+}
+
+static void kvm_piix3_gsi_handler(void *opaque, int n, int level)
+{
+ GSIState *s = opaque;
+
+ if (n < ISA_NUM_IRQS) {
+ /* Kernel will forward to both PIC and IOAPIC */
+ qemu_set_irq(s->i8259_irq[n], level);
+ } else {
+ qemu_set_irq(s->ioapic_irq[n], level);
+ }
+}
+
+static void ioapic_init(GSIState *gsi_state)
+{
+ DeviceState *dev;
+ SysBusDevice *d;
+ unsigned int i;
+
+ if (kvm_enabled() && kvm_irqchip_in_kernel()) {
+ dev = qdev_create(NULL, "kvm-ioapic");
+ } else {
+ dev = qdev_create(NULL, "ioapic");
+ }
+ qdev_init_nofail(dev);
+ d = sysbus_from_qdev(dev);
+ sysbus_mmio_map(d, 0, 0xfec00000);
+
+ for (i = 0; i < IOAPIC_NUM_PINS; i++) {
+ gsi_state->ioapic_irq[i] = qdev_get_gpio_in(dev, i);
+ }
+}
+
+/* PC hardware initialisation */
+static void pc_init1(MemoryRegion *system_memory,
+ MemoryRegion *system_io,
+ ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model,
+ int pci_enabled,
+ int kvmclock_enabled)
+{
+ int i;
+ ram_addr_t below_4g_mem_size, above_4g_mem_size;
+ PCIBus *pci_bus;
+ ISABus *isa_bus;
+ PCII440FXState *i440fx_state;
+ int piix3_devfn = -1;
+ qemu_irq *cpu_irq;
+ qemu_irq *gsi;
+ qemu_irq *i8259;
+ qemu_irq *cmos_s3;
+ qemu_irq *smi_irq;
+ GSIState *gsi_state;
+ DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
+ BusState *idebus[MAX_IDE_BUS];
+ ISADevice *rtc_state;
+ ISADevice *floppy;
+ MemoryRegion *ram_memory;
+ MemoryRegion *pci_memory;
+ MemoryRegion *rom_memory;
+ DeviceState *dev;
+
+ pc_cpus_init(cpu_model);
+
+ if (kvmclock_enabled) {
+ kvmclock_create();
+ }
+
+ if (ram_size >= 0xe0000000 ) {
+ above_4g_mem_size = ram_size - 0xe0000000;
+ below_4g_mem_size = 0xe0000000;
+ } else {
+ above_4g_mem_size = 0;
+ below_4g_mem_size = ram_size;
+ }
+
+ if (pci_enabled) {
+ pci_memory = g_new(MemoryRegion, 1);
+ memory_region_init(pci_memory, "pci", INT64_MAX);
+ rom_memory = pci_memory;
+ } else {
+ pci_memory = NULL;
+ rom_memory = system_memory;
+ }
+
+ /* allocate ram and load rom/bios */
+ if (!xen_enabled()) {
+ pc_memory_init(system_memory,
+ kernel_filename, kernel_cmdline, initrd_filename,
+ below_4g_mem_size, above_4g_mem_size,
+ pci_enabled ? rom_memory : system_memory, &ram_memory);
+ }
+
+ gsi_state = g_malloc0(sizeof(*gsi_state));
+ if (kvm_enabled() && kvm_irqchip_in_kernel()) {
+ kvm_piix3_setup_irq_routing(pci_enabled);
+ gsi = qemu_allocate_irqs(kvm_piix3_gsi_handler, gsi_state,
+ GSI_NUM_PINS);
+ } else {
+ gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
+ }
+
+ if (pci_enabled) {
+ pci_bus = i440fx_init(&i440fx_state, &piix3_devfn, &isa_bus, gsi,
+ system_memory, system_io, ram_size,
+ below_4g_mem_size,
+ 0x100000000ULL - below_4g_mem_size,
+ 0x100000000ULL + above_4g_mem_size,
+ (sizeof(target_phys_addr_t) == 4
+ ? 0
+ : ((uint64_t)1 << 62)),
+ pci_memory, ram_memory);
+ } else {
+ pci_bus = NULL;
+ i440fx_state = NULL;
+ isa_bus = isa_bus_new(NULL, system_io);
+ no_hpet = 1;
+ }
+ isa_bus_irqs(isa_bus, gsi);
+
+ if (kvm_enabled() && kvm_irqchip_in_kernel()) {
+ i8259 = kvm_i8259_init(isa_bus);
+ } else if (xen_enabled()) {
+ i8259 = xen_interrupt_controller_init();
+ } else {
+ cpu_irq = pc_allocate_cpu_irq();
+ i8259 = i8259_init(isa_bus, cpu_irq[0]);
+ }
+
+ for (i = 0; i < ISA_NUM_IRQS; i++) {
+ gsi_state->i8259_irq[i] = i8259[i];
+ }
+ if (pci_enabled) {
+ ioapic_init(gsi_state);
+ }
+
+ pc_register_ferr_irq(gsi[13]);
+
+ dev = pc_vga_init(isa_bus, pci_enabled ? pci_bus : NULL);
+ if (dev) {
+ object_property_add_child(object_get_root(), "vga", OBJECT(dev), NULL);
+ }
+
+ if (xen_enabled()) {
+ pci_create_simple(pci_bus, -1, "xen-platform");
+ }
+
+ /* init basic PC hardware */
+ pc_basic_device_init(isa_bus, gsi, &rtc_state, &floppy, xen_enabled());
+
+ for(i = 0; i < nb_nics; i++) {
+ NICInfo *nd = &nd_table[i];
+
+ if (!pci_enabled || (nd->model && strcmp(nd->model, "ne2k_isa") == 0))
+ pc_init_ne2k_isa(isa_bus, nd);
+ else
+ pci_nic_init_nofail(nd, "e1000", NULL);
+ }
+
+ ide_drive_get(hd, MAX_IDE_BUS);
+ if (pci_enabled) {
+ PCIDevice *dev;
+ if (xen_enabled()) {
+ dev = pci_piix3_xen_ide_init(pci_bus, hd, piix3_devfn + 1);
+ } else {
+ dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
+ }
+ idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
+ idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
+
+ /* FIXME there's some major spaghetti here. Somehow we create the
+ * devices on the PIIX before we actually create it. We create the
+ * PIIX3 deep in the recess of the i440fx creation too and then lose
+ * the DeviceState.
+ *
+ * For now, let's "fix" this by making judicious use of paths. This
+ * is not generally the right way to do this.
+ */
+ object_property_add_child(object_resolve_path("/i440fx/piix3", NULL),
+ "rtc", (Object *)rtc_state, NULL);
+ } else {
+ for(i = 0; i < MAX_IDE_BUS; i++) {
+ ISADevice *dev;
+ dev = isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i],
+ ide_irq[i],
+ hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
+ idebus[i] = qdev_get_child_bus(&dev->qdev, "ide.0");
+ }
+ }
+
+ audio_init(isa_bus, pci_enabled ? pci_bus : NULL);
+
+ pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
+ floppy, idebus[0], idebus[1], rtc_state);
+
+ if (pci_enabled && usb_enabled) {
+ usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
+ }
+
+ if (pci_enabled && acpi_enabled) {
+ i2c_bus *smbus;
+
+ if (!xen_enabled()) {
+ cmos_s3 = qemu_allocate_irqs(pc_cmos_set_s3_resume, rtc_state, 1);
+ } else {
+ cmos_s3 = qemu_allocate_irqs(xen_cmos_set_s3_resume, rtc_state, 1);
+ }
+ smi_irq = qemu_allocate_irqs(pc_acpi_smi_interrupt, first_cpu, 1);
+ /* TODO: Populate SPD eeprom data. */
+ smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
+ gsi[9], *cmos_s3, *smi_irq,
+ kvm_enabled());
+ smbus_eeprom_init(smbus, 8, NULL, 0);
+ }
+
+ if (pci_enabled) {
+ pc_pci_device_init(pci_bus);
+ }
+}
+
+static void pc_init_pci(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ pc_init1(get_system_memory(),
+ get_system_io(),
+ ram_size, boot_device,
+ kernel_filename, kernel_cmdline,
+ initrd_filename, cpu_model, 1, 1);
+}
+
+static void pc_init_pci_no_kvmclock(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ pc_init1(get_system_memory(),
+ get_system_io(),
+ ram_size, boot_device,
+ kernel_filename, kernel_cmdline,
+ initrd_filename, cpu_model, 1, 0);
+}
+
+static void pc_init_isa(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ if (cpu_model == NULL)
+ cpu_model = "486";
+ pc_init1(get_system_memory(),
+ get_system_io(),
+ ram_size, boot_device,
+ kernel_filename, kernel_cmdline,
+ initrd_filename, cpu_model, 0, 1);
+}
+
+#ifdef CONFIG_XEN
+static void pc_xen_hvm_init(ram_addr_t ram_size,
+ const char *boot_device,
+ const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename,
+ const char *cpu_model)
+{
+ if (xen_hvm_init() != 0) {
+ hw_error("xen hardware virtual machine initialisation failed");
+ }
+ pc_init_pci_no_kvmclock(ram_size, boot_device,
+ kernel_filename, kernel_cmdline,
+ initrd_filename, cpu_model);
+ xen_vcpu_init();
+}
+#endif
+
+static QEMUMachine pc_machine_v1_0 = {
+ .name = "pc-1.0",
+ .alias = "pc",
+ .desc = "Standard PC",
+ .init = pc_init_pci,
+ .max_cpus = 255,
+ .is_default = 1,
+};
+
+static QEMUMachine pc_machine_v0_15 = {
+ .name = "pc-0.15",
+ .desc = "Standard PC",
+ .init = pc_init_pci,
+ .max_cpus = 255,
+ .is_default = 1,
+};
+
+static QEMUMachine pc_machine_v0_14 = {
+ .name = "pc-0.14",
+ .desc = "Standard PC",
+ .init = pc_init_pci,
+ .max_cpus = 255,
+ .compat_props = (GlobalProperty[]) {
+ {
+ .driver = "qxl",
+ .property = "revision",
+ .value = stringify(2),
+ },{
+ .driver = "qxl-vga",
+ .property = "revision",
+ .value = stringify(2),
+ },{
+ .driver = "virtio-blk-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-net-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-balloon-pci",
+ .property = "event_idx",
+ .value = "off",
+ },
+ { /* end of list */ }
+ },
+};
+
+static QEMUMachine pc_machine_v0_13 = {
+ .name = "pc-0.13",
+ .desc = "Standard PC",
+ .init = pc_init_pci_no_kvmclock,
+ .max_cpus = 255,
+ .compat_props = (GlobalProperty[]) {
+ {
+ .driver = "virtio-9p-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "VGA",
+ .property = "rombar",
+ .value = stringify(0),
+ },{
+ .driver = "vmware-svga",
+ .property = "rombar",
+ .value = stringify(0),
+ },{
+ .driver = "PCI",
+ .property = "command_serr_enable",
+ .value = "off",
+ },{
+ .driver = "virtio-blk-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-net-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-balloon-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "AC97",
+ .property = "use_broken_id",
+ .value = stringify(1),
+ },
+ { /* end of list */ }
+ },
+};
+
+static QEMUMachine pc_machine_v0_12 = {
+ .name = "pc-0.12",
+ .desc = "Standard PC",
+ .init = pc_init_pci_no_kvmclock,
+ .max_cpus = 255,
+ .compat_props = (GlobalProperty[]) {
+ {
+ .driver = "virtio-serial-pci",
+ .property = "max_ports",
+ .value = stringify(1),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "VGA",
+ .property = "rombar",
+ .value = stringify(0),
+ },{
+ .driver = "vmware-svga",
+ .property = "rombar",
+ .value = stringify(0),
+ },{
+ .driver = "PCI",
+ .property = "command_serr_enable",
+ .value = "off",
+ },{
+ .driver = "virtio-blk-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-net-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-balloon-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "AC97",
+ .property = "use_broken_id",
+ .value = stringify(1),
+ },
+ { /* end of list */ }
+ }
+};
+
+static QEMUMachine pc_machine_v0_11 = {
+ .name = "pc-0.11",
+ .desc = "Standard PC, qemu 0.11",
+ .init = pc_init_pci_no_kvmclock,
+ .max_cpus = 255,
+ .compat_props = (GlobalProperty[]) {
+ {
+ .driver = "virtio-blk-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "max_ports",
+ .value = stringify(1),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "ide-drive",
+ .property = "ver",
+ .value = "0.11",
+ },{
+ .driver = "scsi-disk",
+ .property = "ver",
+ .value = "0.11",
+ },{
+ .driver = "PCI",
+ .property = "rombar",
+ .value = stringify(0),
+ },{
+ .driver = "PCI",
+ .property = "command_serr_enable",
+ .value = "off",
+ },{
+ .driver = "virtio-blk-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-net-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-balloon-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "AC97",
+ .property = "use_broken_id",
+ .value = stringify(1),
+ },
+ { /* end of list */ }
+ }
+};
+
+static QEMUMachine pc_machine_v0_10 = {
+ .name = "pc-0.10",
+ .desc = "Standard PC, qemu 0.10",
+ .init = pc_init_pci_no_kvmclock,
+ .max_cpus = 255,
+ .compat_props = (GlobalProperty[]) {
+ {
+ .driver = "virtio-blk-pci",
+ .property = "class",
+ .value = stringify(PCI_CLASS_STORAGE_OTHER),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "class",
+ .value = stringify(PCI_CLASS_DISPLAY_OTHER),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "max_ports",
+ .value = stringify(1),
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "virtio-net-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "virtio-blk-pci",
+ .property = "vectors",
+ .value = stringify(0),
+ },{
+ .driver = "ide-drive",
+ .property = "ver",
+ .value = "0.10",
+ },{
+ .driver = "scsi-disk",
+ .property = "ver",
+ .value = "0.10",
+ },{
+ .driver = "PCI",
+ .property = "rombar",
+ .value = stringify(0),
+ },{
+ .driver = "PCI",
+ .property = "command_serr_enable",
+ .value = "off",
+ },{
+ .driver = "virtio-blk-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-serial-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-net-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "virtio-balloon-pci",
+ .property = "event_idx",
+ .value = "off",
+ },{
+ .driver = "AC97",
+ .property = "use_broken_id",
+ .value = stringify(1),
+ },
+ { /* end of list */ }
+ },
+};
+
+static QEMUMachine isapc_machine = {
+ .name = "isapc",
+ .desc = "ISA-only PC",
+ .init = pc_init_isa,
+ .max_cpus = 1,
+};
+
+#ifdef CONFIG_XEN
+static QEMUMachine xenfv_machine = {
+ .name = "xenfv",
+ .desc = "Xen Fully-virtualized PC",
+ .init = pc_xen_hvm_init,
+ .max_cpus = HVM_MAX_VCPUS,
+ .default_machine_opts = "accel=xen",
+};
+#endif
+
+static void pc_machine_init(void)
+{
+ qemu_register_machine(&pc_machine_v1_0);
+ qemu_register_machine(&pc_machine_v0_15);
+ qemu_register_machine(&pc_machine_v0_14);
+ qemu_register_machine(&pc_machine_v0_13);
+ qemu_register_machine(&pc_machine_v0_12);
+ qemu_register_machine(&pc_machine_v0_11);
+ qemu_register_machine(&pc_machine_v0_10);
+ qemu_register_machine(&isapc_machine);
+#ifdef CONFIG_XEN
+ qemu_register_machine(&xenfv_machine);
+#endif
+}
+
+machine_init(pc_machine_init);
diff --git a/hw/pc_piix.c b/hw/pc_piix.c
deleted file mode 100644
index c06f1b5..0000000
--- a/hw/pc_piix.c
+++ /dev/null
@@ -1,686 +0,0 @@
-/*
- * QEMU PC System Emulator
- *
- * Copyright (c) 2003-2004 Fabrice Bellard
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to
deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <glib.h>
-
-#include "hw.h"
-#include "pc.h"
-#include "apic.h"
-#include "pci.h"
-#include "usb-uhci.h"
-#include "usb-ohci.h"
-#include "net.h"
-#include "boards.h"
-#include "ide.h"
-#include "kvm.h"
-#include "kvm/clock.h"
-#include "sysemu.h"
-#include "sysbus.h"
-#include "arch_init.h"
-#include "blockdev.h"
-#include "smbus.h"
-#include "xen.h"
-#include "memory.h"
-#include "exec-memory.h"
-#ifdef CONFIG_XEN
-# include <xen/hvm/hvm_info_table.h>
-#endif
-
-#define MAX_IDE_BUS 2
-
-static const int ide_iobase[MAX_IDE_BUS] = { 0x1f0, 0x170 };
-static const int ide_iobase2[MAX_IDE_BUS] = { 0x3f6, 0x376 };
-static const int ide_irq[MAX_IDE_BUS] = { 14, 15 };
-
-static void kvm_piix3_setup_irq_routing(bool pci_enabled)
-{
-#ifdef CONFIG_KVM
- KVMState *s = kvm_state;
- int ret, i;
-
- if (kvm_check_extension(s, KVM_CAP_IRQ_ROUTING)) {
- for (i = 0; i < 8; ++i) {
- if (i == 2) {
- continue;
- }
- kvm_irqchip_add_route(s, i, KVM_IRQCHIP_PIC_MASTER, i);
- }
- for (i = 8; i < 16; ++i) {
- kvm_irqchip_add_route(s, i, KVM_IRQCHIP_PIC_SLAVE, i - 8);
- }
- if (pci_enabled) {
- for (i = 0; i < 24; ++i) {
- if (i == 0) {
- kvm_irqchip_add_route(s, i, KVM_IRQCHIP_IOAPIC, 2);
- } else if (i != 2) {
- kvm_irqchip_add_route(s, i, KVM_IRQCHIP_IOAPIC, i);
- }
- }
- }
- ret = kvm_irqchip_commit_routes(s);
- if (ret < 0) {
- hw_error("KVM IRQ routing setup failed");
- }
- }
-#endif /* CONFIG_KVM */
-}
-
-static void kvm_piix3_gsi_handler(void *opaque, int n, int level)
-{
- GSIState *s = opaque;
-
- if (n < ISA_NUM_IRQS) {
- /* Kernel will forward to both PIC and IOAPIC */
- qemu_set_irq(s->i8259_irq[n], level);
- } else {
- qemu_set_irq(s->ioapic_irq[n], level);
- }
-}
-
-static void ioapic_init(GSIState *gsi_state)
-{
- DeviceState *dev;
- SysBusDevice *d;
- unsigned int i;
-
- if (kvm_enabled() && kvm_irqchip_in_kernel()) {
- dev = qdev_create(NULL, "kvm-ioapic");
- } else {
- dev = qdev_create(NULL, "ioapic");
- }
- qdev_init_nofail(dev);
- d = sysbus_from_qdev(dev);
- sysbus_mmio_map(d, 0, 0xfec00000);
-
- for (i = 0; i < IOAPIC_NUM_PINS; i++) {
- gsi_state->ioapic_irq[i] = qdev_get_gpio_in(dev, i);
- }
-}
-
-/* PC hardware initialisation */
-static void pc_init1(MemoryRegion *system_memory,
- MemoryRegion *system_io,
- ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- const char *cpu_model,
- int pci_enabled,
- int kvmclock_enabled)
-{
- int i;
- ram_addr_t below_4g_mem_size, above_4g_mem_size;
- PCIBus *pci_bus;
- ISABus *isa_bus;
- PCII440FXState *i440fx_state;
- int piix3_devfn = -1;
- qemu_irq *cpu_irq;
- qemu_irq *gsi;
- qemu_irq *i8259;
- qemu_irq *cmos_s3;
- qemu_irq *smi_irq;
- GSIState *gsi_state;
- DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
- BusState *idebus[MAX_IDE_BUS];
- ISADevice *rtc_state;
- ISADevice *floppy;
- MemoryRegion *ram_memory;
- MemoryRegion *pci_memory;
- MemoryRegion *rom_memory;
- DeviceState *dev;
-
- pc_cpus_init(cpu_model);
-
- if (kvmclock_enabled) {
- kvmclock_create();
- }
-
- if (ram_size >= 0xe0000000 ) {
- above_4g_mem_size = ram_size - 0xe0000000;
- below_4g_mem_size = 0xe0000000;
- } else {
- above_4g_mem_size = 0;
- below_4g_mem_size = ram_size;
- }
-
- if (pci_enabled) {
- pci_memory = g_new(MemoryRegion, 1);
- memory_region_init(pci_memory, "pci", INT64_MAX);
- rom_memory = pci_memory;
- } else {
- pci_memory = NULL;
- rom_memory = system_memory;
- }
-
- /* allocate ram and load rom/bios */
- if (!xen_enabled()) {
- pc_memory_init(system_memory,
- kernel_filename, kernel_cmdline, initrd_filename,
- below_4g_mem_size, above_4g_mem_size,
- pci_enabled ? rom_memory : system_memory, &ram_memory);
- }
-
- gsi_state = g_malloc0(sizeof(*gsi_state));
- if (kvm_enabled() && kvm_irqchip_in_kernel()) {
- kvm_piix3_setup_irq_routing(pci_enabled);
- gsi = qemu_allocate_irqs(kvm_piix3_gsi_handler, gsi_state,
- GSI_NUM_PINS);
- } else {
- gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
- }
-
- if (pci_enabled) {
- pci_bus = i440fx_init(&i440fx_state, &piix3_devfn, &isa_bus, gsi,
- system_memory, system_io, ram_size,
- below_4g_mem_size,
- 0x100000000ULL - below_4g_mem_size,
- 0x100000000ULL + above_4g_mem_size,
- (sizeof(target_phys_addr_t) == 4
- ? 0
- : ((uint64_t)1 << 62)),
- pci_memory, ram_memory);
- } else {
- pci_bus = NULL;
- i440fx_state = NULL;
- isa_bus = isa_bus_new(NULL, system_io);
- no_hpet = 1;
- }
- isa_bus_irqs(isa_bus, gsi);
-
- if (kvm_enabled() && kvm_irqchip_in_kernel()) {
- i8259 = kvm_i8259_init(isa_bus);
- } else if (xen_enabled()) {
- i8259 = xen_interrupt_controller_init();
- } else {
- cpu_irq = pc_allocate_cpu_irq();
- i8259 = i8259_init(isa_bus, cpu_irq[0]);
- }
-
- for (i = 0; i < ISA_NUM_IRQS; i++) {
- gsi_state->i8259_irq[i] = i8259[i];
- }
- if (pci_enabled) {
- ioapic_init(gsi_state);
- }
-
- pc_register_ferr_irq(gsi[13]);
-
- dev = pc_vga_init(isa_bus, pci_enabled ? pci_bus : NULL);
- if (dev) {
- object_property_add_child(object_get_root(), "vga", OBJECT(dev), NULL);
- }
-
- if (xen_enabled()) {
- pci_create_simple(pci_bus, -1, "xen-platform");
- }
-
- /* init basic PC hardware */
- pc_basic_device_init(isa_bus, gsi, &rtc_state, &floppy, xen_enabled());
-
- for(i = 0; i < nb_nics; i++) {
- NICInfo *nd = &nd_table[i];
-
- if (!pci_enabled || (nd->model && strcmp(nd->model, "ne2k_isa") == 0))
- pc_init_ne2k_isa(isa_bus, nd);
- else
- pci_nic_init_nofail(nd, "e1000", NULL);
- }
-
- ide_drive_get(hd, MAX_IDE_BUS);
- if (pci_enabled) {
- PCIDevice *dev;
- if (xen_enabled()) {
- dev = pci_piix3_xen_ide_init(pci_bus, hd, piix3_devfn + 1);
- } else {
- dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
- }
- idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
- idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
-
- /* FIXME there's some major spaghetti here. Somehow we create the
- * devices on the PIIX before we actually create it. We create the
- * PIIX3 deep in the recess of the i440fx creation too and then lose
- * the DeviceState.
- *
- * For now, let's "fix" this by making judicious use of paths. This
- * is not generally the right way to do this.
- */
- object_property_add_child(object_resolve_path("/i440fx/piix3", NULL),
- "rtc", (Object *)rtc_state, NULL);
- } else {
- for(i = 0; i < MAX_IDE_BUS; i++) {
- ISADevice *dev;
- dev = isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i],
- ide_irq[i],
- hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
- idebus[i] = qdev_get_child_bus(&dev->qdev, "ide.0");
- }
- }
-
- audio_init(isa_bus, pci_enabled ? pci_bus : NULL);
-
- pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
- floppy, idebus[0], idebus[1], rtc_state);
-
- if (pci_enabled && usb_enabled) {
- usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
- }
-
- if (pci_enabled && acpi_enabled) {
- i2c_bus *smbus;
-
- if (!xen_enabled()) {
- cmos_s3 = qemu_allocate_irqs(pc_cmos_set_s3_resume, rtc_state, 1);
- } else {
- cmos_s3 = qemu_allocate_irqs(xen_cmos_set_s3_resume, rtc_state, 1);
- }
- smi_irq = qemu_allocate_irqs(pc_acpi_smi_interrupt, first_cpu, 1);
- /* TODO: Populate SPD eeprom data. */
- smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
- gsi[9], *cmos_s3, *smi_irq,
- kvm_enabled());
- smbus_eeprom_init(smbus, 8, NULL, 0);
- }
-
- if (pci_enabled) {
- pc_pci_device_init(pci_bus);
- }
-}
-
-static void pc_init_pci(ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- const char *cpu_model)
-{
- pc_init1(get_system_memory(),
- get_system_io(),
- ram_size, boot_device,
- kernel_filename, kernel_cmdline,
- initrd_filename, cpu_model, 1, 1);
-}
-
-static void pc_init_pci_no_kvmclock(ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- const char *cpu_model)
-{
- pc_init1(get_system_memory(),
- get_system_io(),
- ram_size, boot_device,
- kernel_filename, kernel_cmdline,
- initrd_filename, cpu_model, 1, 0);
-}
-
-static void pc_init_isa(ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- const char *cpu_model)
-{
- if (cpu_model == NULL)
- cpu_model = "486";
- pc_init1(get_system_memory(),
- get_system_io(),
- ram_size, boot_device,
- kernel_filename, kernel_cmdline,
- initrd_filename, cpu_model, 0, 1);
-}
-
-#ifdef CONFIG_XEN
-static void pc_xen_hvm_init(ram_addr_t ram_size,
- const char *boot_device,
- const char *kernel_filename,
- const char *kernel_cmdline,
- const char *initrd_filename,
- const char *cpu_model)
-{
- if (xen_hvm_init() != 0) {
- hw_error("xen hardware virtual machine initialisation failed");
- }
- pc_init_pci_no_kvmclock(ram_size, boot_device,
- kernel_filename, kernel_cmdline,
- initrd_filename, cpu_model);
- xen_vcpu_init();
-}
-#endif
-
-static QEMUMachine pc_machine_v1_0 = {
- .name = "pc-1.0",
- .alias = "pc",
- .desc = "Standard PC",
- .init = pc_init_pci,
- .max_cpus = 255,
- .is_default = 1,
-};
-
-static QEMUMachine pc_machine_v0_15 = {
- .name = "pc-0.15",
- .desc = "Standard PC",
- .init = pc_init_pci,
- .max_cpus = 255,
- .is_default = 1,
-};
-
-static QEMUMachine pc_machine_v0_14 = {
- .name = "pc-0.14",
- .desc = "Standard PC",
- .init = pc_init_pci,
- .max_cpus = 255,
- .compat_props = (GlobalProperty[]) {
- {
- .driver = "qxl",
- .property = "revision",
- .value = stringify(2),
- },{
- .driver = "qxl-vga",
- .property = "revision",
- .value = stringify(2),
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },
- { /* end of list */ }
- },
-};
-
-static QEMUMachine pc_machine_v0_13 = {
- .name = "pc-0.13",
- .desc = "Standard PC",
- .init = pc_init_pci_no_kvmclock,
- .max_cpus = 255,
- .compat_props = (GlobalProperty[]) {
- {
- .driver = "virtio-9p-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "VGA",
- .property = "rombar",
- .value = stringify(0),
- },{
- .driver = "vmware-svga",
- .property = "rombar",
- .value = stringify(0),
- },{
- .driver = "PCI",
- .property = "command_serr_enable",
- .value = "off",
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "AC97",
- .property = "use_broken_id",
- .value = stringify(1),
- },
- { /* end of list */ }
- },
-};
-
-static QEMUMachine pc_machine_v0_12 = {
- .name = "pc-0.12",
- .desc = "Standard PC",
- .init = pc_init_pci_no_kvmclock,
- .max_cpus = 255,
- .compat_props = (GlobalProperty[]) {
- {
- .driver = "virtio-serial-pci",
- .property = "max_ports",
- .value = stringify(1),
- },{
- .driver = "virtio-serial-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "VGA",
- .property = "rombar",
- .value = stringify(0),
- },{
- .driver = "vmware-svga",
- .property = "rombar",
- .value = stringify(0),
- },{
- .driver = "PCI",
- .property = "command_serr_enable",
- .value = "off",
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "AC97",
- .property = "use_broken_id",
- .value = stringify(1),
- },
- { /* end of list */ }
- }
-};
-
-static QEMUMachine pc_machine_v0_11 = {
- .name = "pc-0.11",
- .desc = "Standard PC, qemu 0.11",
- .init = pc_init_pci_no_kvmclock,
- .max_cpus = 255,
- .compat_props = (GlobalProperty[]) {
- {
- .driver = "virtio-blk-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "virtio-serial-pci",
- .property = "max_ports",
- .value = stringify(1),
- },{
- .driver = "virtio-serial-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "ide-drive",
- .property = "ver",
- .value = "0.11",
- },{
- .driver = "scsi-disk",
- .property = "ver",
- .value = "0.11",
- },{
- .driver = "PCI",
- .property = "rombar",
- .value = stringify(0),
- },{
- .driver = "PCI",
- .property = "command_serr_enable",
- .value = "off",
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "AC97",
- .property = "use_broken_id",
- .value = stringify(1),
- },
- { /* end of list */ }
- }
-};
-
-static QEMUMachine pc_machine_v0_10 = {
- .name = "pc-0.10",
- .desc = "Standard PC, qemu 0.10",
- .init = pc_init_pci_no_kvmclock,
- .max_cpus = 255,
- .compat_props = (GlobalProperty[]) {
- {
- .driver = "virtio-blk-pci",
- .property = "class",
- .value = stringify(PCI_CLASS_STORAGE_OTHER),
- },{
- .driver = "virtio-serial-pci",
- .property = "class",
- .value = stringify(PCI_CLASS_DISPLAY_OTHER),
- },{
- .driver = "virtio-serial-pci",
- .property = "max_ports",
- .value = stringify(1),
- },{
- .driver = "virtio-serial-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "virtio-net-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "virtio-blk-pci",
- .property = "vectors",
- .value = stringify(0),
- },{
- .driver = "ide-drive",
- .property = "ver",
- .value = "0.10",
- },{
- .driver = "scsi-disk",
- .property = "ver",
- .value = "0.10",
- },{
- .driver = "PCI",
- .property = "rombar",
- .value = stringify(0),
- },{
- .driver = "PCI",
- .property = "command_serr_enable",
- .value = "off",
- },{
- .driver = "virtio-blk-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-serial-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-net-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "virtio-balloon-pci",
- .property = "event_idx",
- .value = "off",
- },{
- .driver = "AC97",
- .property = "use_broken_id",
- .value = stringify(1),
- },
- { /* end of list */ }
- },
-};
-
-static QEMUMachine isapc_machine = {
- .name = "isapc",
- .desc = "ISA-only PC",
- .init = pc_init_isa,
- .max_cpus = 1,
-};
-
-#ifdef CONFIG_XEN
-static QEMUMachine xenfv_machine = {
- .name = "xenfv",
- .desc = "Xen Fully-virtualized PC",
- .init = pc_xen_hvm_init,
- .max_cpus = HVM_MAX_VCPUS,
- .default_machine_opts = "accel=xen",
-};
-#endif
-
-static void pc_machine_init(void)
-{
- qemu_register_machine(&pc_machine_v1_0);
- qemu_register_machine(&pc_machine_v0_15);
- qemu_register_machine(&pc_machine_v0_14);
- qemu_register_machine(&pc_machine_v0_13);
- qemu_register_machine(&pc_machine_v0_12);
- qemu_register_machine(&pc_machine_v0_11);
- qemu_register_machine(&pc_machine_v0_10);
- qemu_register_machine(&isapc_machine);
-#ifdef CONFIG_XEN
- qemu_register_machine(&xenfv_machine);
-#endif
-}
-
-machine_init(pc_machine_init);
--
1.7.4.1
- [Qemu-devel] [RFC 00/15] Refactor PC machine to take advantage of QOM, Anthony Liguori, 2012/01/26
- [Qemu-devel] [PATCH 02/15] pc: make some functions static, Anthony Liguori, 2012/01/26
- [Qemu-devel] [PATCH 03/15] piix3: make PIIX3-xen a subclass of PIIX3, Anthony Liguori, 2012/01/26
- [Qemu-devel] [PATCH 04/15] piix: prepare for composition, Anthony Liguori, 2012/01/26
- [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c,
Anthony Liguori <=
- Re: [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c, Anthony Liguori, 2012/01/26
- Re: [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c, Jan Kiszka, 2012/01/27
- Re: [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c, Anthony Liguori, 2012/01/27
- Re: [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c, Jan Kiszka, 2012/01/27
- Re: [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c, Anthony Liguori, 2012/01/27
- Re: [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c, Jan Kiszka, 2012/01/27
- Re: [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c, Anthony Liguori, 2012/01/27
- Re: [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c, Andreas Färber, 2012/01/27
- Re: [Qemu-devel] [PATCH 01/15] pc: merge pc_piix.c into pc.c, Anthony Liguori, 2012/01/27
[Qemu-devel] [PATCH 06/15] piix: create i8254 through composition, Anthony Liguori, 2012/01/26