[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 10/10] qapi: Convert block_set_io_throttle
From: |
Zhi Yong Wu |
Subject: |
Re: [Qemu-devel] [PATCH 10/10] qapi: Convert block_set_io_throttle |
Date: |
Tue, 17 Jan 2012 15:30:39 +0000 |
On Tue, Jan 17, 2012 at 3:18 PM, Luiz Capitulino <address@hidden> wrote:
> On Fri, 13 Jan 2012 14:53:19 -0600
> Anthony Liguori <address@hidden> wrote:
>
>> On 01/09/2012 05:24 AM, Luiz Capitulino wrote:
>> > Signed-off-by: Luiz Capitulino<address@hidden>
>> > ---
>> > blockdev.c | 47 ++++++++++++++---------------------------------
>> > blockdev.h | 2 --
>> > hmp-commands.hx | 3 +--
>> > hmp.c | 14 ++++++++++++++
>> > hmp.h | 1 +
>> > qapi-schema.json | 29 +++++++++++++++++++++++++++++
>> > qmp-commands.hx | 5 +----
>> > 7 files changed, 60 insertions(+), 41 deletions(-)
>> >
>> > diff --git a/blockdev.c b/blockdev.c
>> > index 8df78ce..5d16137 100644
>> > --- a/blockdev.c
>> > +++ b/blockdev.c
>> > @@ -775,46 +775,29 @@ void qmp_change_blockdev(const char *device, const
>> > char *filename,
>> > }
>> >
>> > /* throttling disk I/O limits */
>> > -int do_block_set_io_throttle(Monitor *mon,
>> > - const QDict *qdict, QObject **ret_data)
>> > +void qmp_block_set_io_throttle(const char *device, int64_t bps, int64_t
>> > bps_rd,
>> > + int64_t bps_wr, int64_t iops, int64_t
>> > iops_rd,
>> > + int64_t iops_wr, Error **errp)
>> > {
>> > BlockIOLimit io_limits;
>> > - const char *devname = qdict_get_str(qdict, "device");
>> > BlockDriverState *bs;
>> >
>> > - io_limits.bps[BLOCK_IO_LIMIT_TOTAL]
>> > - = qdict_get_try_int(qdict, "bps", -1);
>> > - io_limits.bps[BLOCK_IO_LIMIT_READ]
>> > - = qdict_get_try_int(qdict, "bps_rd", -1);
>> > - io_limits.bps[BLOCK_IO_LIMIT_WRITE]
>> > - = qdict_get_try_int(qdict, "bps_wr", -1);
>> > - io_limits.iops[BLOCK_IO_LIMIT_TOTAL]
>> > - = qdict_get_try_int(qdict, "iops", -1);
>> > - io_limits.iops[BLOCK_IO_LIMIT_READ]
>> > - = qdict_get_try_int(qdict, "iops_rd", -1);
>> > - io_limits.iops[BLOCK_IO_LIMIT_WRITE]
>> > - = qdict_get_try_int(qdict, "iops_wr", -1);
>> > -
>> > - bs = bdrv_find(devname);
>> > + bs = bdrv_find(device);
>> > if (!bs) {
>> > - qerror_report(QERR_DEVICE_NOT_FOUND, devname);
>> > - return -1;
>> > + error_set(errp, QERR_DEVICE_NOT_FOUND, device);
>> > + return;
>> > }
>> >
>> > - if ((io_limits.bps[BLOCK_IO_LIMIT_TOTAL] == -1)
>> > - || (io_limits.bps[BLOCK_IO_LIMIT_READ] == -1)
>> > - || (io_limits.bps[BLOCK_IO_LIMIT_WRITE] == -1)
>> > - || (io_limits.iops[BLOCK_IO_LIMIT_TOTAL] == -1)
>> > - || (io_limits.iops[BLOCK_IO_LIMIT_READ] == -1)
>> > - || (io_limits.iops[BLOCK_IO_LIMIT_WRITE] == -1)) {
>> > - qerror_report(QERR_MISSING_PARAMETER,
>> > - "bps/bps_rd/bps_wr/iops/iops_rd/iops_wr");
>> > - return -1;
>> > - }
>> > + io_limits.bps[BLOCK_IO_LIMIT_TOTAL] = bps;
>> > + io_limits.bps[BLOCK_IO_LIMIT_READ] = bps_rd;
>> > + io_limits.bps[BLOCK_IO_LIMIT_WRITE] = bps_wr;
>> > + io_limits.iops[BLOCK_IO_LIMIT_TOTAL]= iops;
>> > + io_limits.iops[BLOCK_IO_LIMIT_READ] = iops_rd;
>> > + io_limits.iops[BLOCK_IO_LIMIT_WRITE]= iops_wr;
>> >
>> > if (!do_check_io_limits(&io_limits)) {
>> > - qerror_report(QERR_INVALID_PARAMETER_COMBINATION);
>> > - return -1;
>> > + error_set(errp, QERR_INVALID_PARAMETER_COMBINATION);
>> > + return;
>> > }
>> >
>> > bs->io_limits = io_limits;
>> > @@ -829,8 +812,6 @@ int do_block_set_io_throttle(Monitor *mon,
>> > qemu_mod_timer(bs->block_timer, qemu_get_clock_ns(vm_clock));
>> > }
>> > }
>> > -
>> > - return 0;
>> > }
>> >
>> > int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
>> > diff --git a/blockdev.h b/blockdev.h
>> > index b077449..260e16b 100644
>> > --- a/blockdev.h
>> > +++ b/blockdev.h
>> > @@ -62,6 +62,4 @@ void qmp_change_blockdev(const char *device, const char
>> > *filename,
>> > bool has_format, const char *format, Error
>> > **errp);
>> > void do_commit(Monitor *mon, const QDict *qdict);
>> > int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data);
>> > -int do_block_set_io_throttle(Monitor *mon,
>> > - const QDict *qdict, QObject **ret_data);
>> > #endif
>> > diff --git a/hmp-commands.hx b/hmp-commands.hx
>> > index 9f44690..a5d8d33 100644
>> > --- a/hmp-commands.hx
>> > +++ b/hmp-commands.hx
>> > @@ -1204,8 +1204,7 @@ ETEXI
>> > .args_type =
>> > "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
>> > .params = "device bps bps_rd bps_wr iops iops_rd iops_wr",
>> > .help = "change I/O throttle limits for a block drive",
>> > - .user_print = monitor_user_noop,
>> > - .mhandler.cmd_new = do_block_set_io_throttle,
>> > + .mhandler.cmd = hmp_block_set_io_throttle,
>> > },
>> >
>> > STEXI
>> > diff --git a/hmp.c b/hmp.c
>> > index 89fa8e7..c88c93e 100644
>> > --- a/hmp.c
>> > +++ b/hmp.c
>> > @@ -767,3 +767,17 @@ void hmp_change(Monitor *mon, const QDict *qdict)
>> > }
>> > hmp_handle_error(mon,&err);
>> > }
>> > +
>> > +void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict)
>> > +{
>> > + Error *err = NULL;
>> > +
>> > + qmp_block_set_io_throttle(qdict_get_str(qdict, "device"),
>> > + qdict_get_int(qdict, "bps"),
>> > + qdict_get_int(qdict, "bps_rd"),
>> > + qdict_get_int(qdict, "bps_wr"),
>> > + qdict_get_int(qdict, "iops"),
>> > + qdict_get_int(qdict, "iops_rd"),
>> > + qdict_get_int(qdict, "iops_wr"),&err);
>> > + hmp_handle_error(mon,&err);
>> > +}
>> > diff --git a/hmp.h b/hmp.h
>> > index 621bdc2..aab0b1f 100644
>> > --- a/hmp.h
>> > +++ b/hmp.h
>> > @@ -53,5 +53,6 @@ void hmp_set_password(Monitor *mon, const QDict *qdict);
>> > void hmp_expire_password(Monitor *mon, const QDict *qdict);
>> > void hmp_eject(Monitor *mon, const QDict *qdict);
>> > void hmp_change(Monitor *mon, const QDict *qdict);
>> > +void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict);
>> >
>> > #endif
>> > diff --git a/qapi-schema.json b/qapi-schema.json
>> > index 36fd156..1e1f128 100644
>> > --- a/qapi-schema.json
>> > +++ b/qapi-schema.json
>> > @@ -1403,3 +1403,32 @@
>> > ##
>> > { 'command': 'change',
>> > 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} }
>> > +
>> > +##
>> > +# @block_set_io_throttle:
>> > +#
>> > +# Change I/O throttle limits for a block drive.
>> > +#
>> > +# @device: The name of the device
>> > +#
>> > +# @bps: total throughput limit in bytes per second
>> > +#
>> > +# @bps_rd: read throughput limit in bytes per second
>> > +#
>> > +# @bps_wr: read throughput limit in bytes per second
>>
>> write throughput.
>
> Fixed.
>
>> > +#
>> > +# @iops: total I/O operations per second
>> > +#
>> > +# @ops_rd: read I/O operations per second
>> > +#
>> > +# @iops_wr: write I/O operations per second
>> > +#
>> > +# Returns: Nothing on success
>> > +# If @device is not a valid block device, DeviceNotFound
>> > +# If the argument combination is invalid,
>> > InvalidParameterCombination
>> > +#
>> > +# Since: 1.1
>>
>>
>> Do all of these fields have to be specified? It looks like they were all
>> optional in the previous form of the command so they should probably be
>> optional
>> here too.
>
> They were required, as it's necessary to use '?' for optionals in the
> args_type entry:
>
>> > --- a/qmp-commands.hx
>> > +++ b/qmp-commands.hx
>> > @@ -807,10 +807,7 @@ EQMP
>> > {
>> > .name = "block_set_io_throttle",
>> > .args_type =
>> > "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
>
> The implementation also seems to imply they are required because there's
> an explicit check for it (which can be dropped in the new version...).
>
> Can the author/block guys confirm these parameters are intended to be
> required?
For hmp, they are required, while for qmp, they are optional in
theory. In order to two interfaces consistent, these parameters are
all required.
>
--
Regards,
Zhi Yong Wu
- [Qemu-devel] [PATCH 01/10] vnc: Simplify vnc_display_password(), (continued)
- [Qemu-devel] [PATCH 01/10] vnc: Simplify vnc_display_password(), Luiz Capitulino, 2012/01/09
- [Qemu-devel] [PATCH 02/10] qapi: Convert set_password, Luiz Capitulino, 2012/01/09
- [Qemu-devel] [PATCH 04/10] block: eject_device(): Use error_set(), Luiz Capitulino, 2012/01/09
- [Qemu-devel] [PATCH 05/10] qapi: Convert eject, Luiz Capitulino, 2012/01/09
- [Qemu-devel] [PATCH 03/10] qapi: Convert expire_password, Luiz Capitulino, 2012/01/09
- [Qemu-devel] [PATCH 06/10] monitor: expose readline state, Luiz Capitulino, 2012/01/09
- [Qemu-devel] [PATCH 07/10] qapi: Introduce change-vnc-password, Luiz Capitulino, 2012/01/09
- [Qemu-devel] [PATCH 10/10] qapi: Convert block_set_io_throttle, Luiz Capitulino, 2012/01/09
- [Qemu-devel] [PATCH 08/10] qerror: Extend QERR_DEVICE_ENCRYPTED, Luiz Capitulino, 2012/01/09
- [Qemu-devel] [PATCH 09/10] qapi: Convert change, Luiz Capitulino, 2012/01/09