|
| From: | Hannes Reinecke |
| Subject: | Re: [Qemu-devel] [PATCH 1/3] scsi: Sanitize command definitions |
| Date: | Fri, 22 Jul 2011 16:14:22 +0200 |
| User-agent: | Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.14) Gecko/20110221 SUSE/3.1.8 Thunderbird/3.1.8 |
On 07/22/2011 04:07 PM, Markus Armbruster wrote:
Hannes Reinecke<address@hidden> writes:Adding some missing command definitions and update the existing ones. No functional change.Add: LOCATE_10, UNMAP, VARLENGTH_CDB, WRITE_FILEMARKS_16, EXTENDED_COPY, ATA_PASSTHROUGH, ACCESS_CONTROL_IN, ACCESS_CONTROL_OUT, COMPARE_AND_WRITE, VERIFY_16, SYNCHRONIZE_CACHE_16, LOCATE_16, ERASE_16, WRITE_LONG_16, VERIFY_12, READ_DEFECT_DATA_12. Rename: READ_CAPACITY, WRITE_VERIFY, VERIFY, READ_LONG, WRITE_LONG, WRITE_SAME to&_10. Delete: WRITE_LONG_2
OK.
Yes, you are correct. Will be doing another patch with removing references to obsolete commands SET_WINDOW and WRITE_LONG_2.Signed-off-by: Hannes Reinecke<address@hidden> --- hw/scsi-bus.c | 71 ++++++++++++++++++++++++++++++---------------------- hw/scsi-defs.h | 60 ++++++++++++++++++++++++++++---------------- hw/scsi-disk.c | 29 ++++++++------------- hw/scsi-generic.c | 2 +- 4 files changed, 91 insertions(+), 71 deletions(-) diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c index 8b1a412..24a1298 100644 --- a/hw/scsi-bus.c +++ b/hw/scsi-bus.c @@ -232,24 +232,24 @@ static int scsi_req_length(SCSIRequest *req, uint8_t *cmd) case RELEASE: case ERASE: case ALLOW_MEDIUM_REMOVAL: - case VERIFY: + case VERIFY_10: case SEEK_10: case SYNCHRONIZE_CACHE: case LOCK_UNLOCK_CACHE: case LOAD_UNLOAD: case SET_CD_SPEED: case SET_LIMITS: - case WRITE_LONG: + case WRITE_LONG_10: case MOVE_MEDIUM: case UPDATE_BLOCK: req->cmd.xfer = 0; break; case MODE_SENSE: break; - case WRITE_SAME: + case WRITE_SAME_10: req->cmd.xfer = 1; break; - case READ_CAPACITY: + case READ_CAPACITY_10: req->cmd.xfer = 8; break; case READ_BLOCK_LIMITS: @@ -265,7 +265,7 @@ static int scsi_req_length(SCSIRequest *req, uint8_t *cmd) req->cmd.xfer *= 8; break; case WRITE_10: - case WRITE_VERIFY: + case WRITE_VERIFY_10: case WRITE_6: case WRITE_12: case WRITE_VERIFY_12: @@ -325,7 +325,7 @@ static void scsi_req_xfer_mode(SCSIRequest *req) switch (req->cmd.buf[0]) { case WRITE_6: case WRITE_10: - case WRITE_VERIFY: + case WRITE_VERIFY_10: case WRITE_12: case WRITE_VERIFY_12: case WRITE_16: @@ -345,15 +345,13 @@ static void scsi_req_xfer_mode(SCSIRequest *req) case SEARCH_HIGH: case SEARCH_LOW: case UPDATE_BLOCK: - case WRITE_LONG: - case WRITE_SAME: + case WRITE_LONG_10: + case WRITE_SAME_10: case SEARCH_HIGH_12: case SEARCH_EQUAL_12: case SEARCH_LOW_12: - case SET_WINDOW:I figure this is "no functional change" because all users of this function reject SET_WINDOW elsewhere.
case MEDIUM_SCAN: case SEND_VOLUME_TAG: - case WRITE_LONG_2:Same here.
Indeed.
case PERSISTENT_RESERVE_OUT: case MAINTENANCE_OUT: req->cmd.mode = SCSI_XFER_TO_DEV; @@ -517,8 +515,7 @@ static const char *scsi_command_name(uint8_t cmd) { static const char *names[] = { [ TEST_UNIT_READY ] = "TEST_UNIT_READY", - [ REZERO_UNIT ] = "REZERO_UNIT", - /* REWIND and REZERO_UNIT use the same operation code */ + [ REWIND ] = "REWIND","No functional change" because it's used only for scsi_req_print(), which is unused.
See above.
[ REQUEST_SENSE ] = "REQUEST_SENSE", [ FORMAT_UNIT ] = "FORMAT_UNIT", [ READ_BLOCK_LIMITS ] = "READ_BLOCK_LIMITS", @@ -543,14 +540,13 @@ static const char *scsi_command_name(uint8_t cmd) [ RECEIVE_DIAGNOSTIC ] = "RECEIVE_DIAGNOSTIC", [ SEND_DIAGNOSTIC ] = "SEND_DIAGNOSTIC", [ ALLOW_MEDIUM_REMOVAL ] = "ALLOW_MEDIUM_REMOVAL", - [ SET_WINDOW ] = "SET_WINDOW", - [ READ_CAPACITY ] = "READ_CAPACITY", + [ READ_CAPACITY_10 ] = "READ_CAPACITY_10", [ READ_10 ] = "READ_10", [ WRITE_10 ] = "WRITE_10", [ SEEK_10 ] = "SEEK_10",New LOCATE_10 missing.
OK.
- [ WRITE_VERIFY ] = "WRITE_VERIFY", - [ VERIFY ] = "VERIFY", + [ WRITE_VERIFY_10 ] = "WRITE_VERIFY_10", + [ VERIFY_10 ] = "VERIFY_10", [ SEARCH_HIGH ] = "SEARCH_HIGH", [ SEARCH_EQUAL ] = "SEARCH_EQUAL", [ SEARCH_LOW ] = "SEARCH_LOW", @@ -566,11 +562,14 @@ static const char *scsi_command_name(uint8_t cmd) [ WRITE_BUFFER ] = "WRITE_BUFFER", [ READ_BUFFER ] = "READ_BUFFER", [ UPDATE_BLOCK ] = "UPDATE_BLOCK", - [ READ_LONG ] = "READ_LONG", - [ WRITE_LONG ] = "WRITE_LONG", + [ READ_LONG_10 ] = "READ_LONG_10", + [ WRITE_LONG_10 ] = "WRITE_LONG_10", [ CHANGE_DEFINITION ] = "CHANGE_DEFINITION", - [ WRITE_SAME ] = "WRITE_SAME", + [ WRITE_SAME_10 ] = "WRITE_SAME_10", + [ UNMAP ] = "UNMAP", [ READ_TOC ] = "READ_TOC", + [ REPORT_DENSITY_SUPPORT ] = "REPORT_DENSITY_SUPPORT", + [ GET_CONFIGURATION ] = "GET_CONFIGURATION", [ LOG_SELECT ] = "LOG_SELECT", [ LOG_SENSE ] = "LOG_SENSE", [ MODE_SELECT_10 ] = "MODE_SELECT_10", @@ -579,27 +578,39 @@ static const char *scsi_command_name(uint8_t cmd) [ MODE_SENSE_10 ] = "MODE_SENSE_10", [ PERSISTENT_RESERVE_IN ] = "PERSISTENT_RESERVE_IN", [ PERSISTENT_RESERVE_OUT ] = "PERSISTENT_RESERVE_OUT",New VARLENGTH_CDB missing.
Intentionally. VARLENGHT_CDB is used for all sorts of things, so I think we should be printing that one out separately. Same goes for MAINTENANCE_(IN|OUT) and SERVICE_ACTION_(IN|OUT).
+ [ WRITE_FILEMARKS_16 ] = "WRITE_FILEMARKS_16", + [ EXTENDED_COPY ] = "EXTENDED_COPY", + [ ATA_PASSTHROUGH ] = "ATA_PASSTHROUGH", + [ ACCESS_CONTROL_IN ] = "ACCESS_CONTROL_IN", + [ ACCESS_CONTROL_OUT ] = "ACCESS_CONTROL_OUT", + [ READ_16 ] = "READ_16", + [ COMPARE_AND_WRITE ] = "COMPARE_AND_WRITE", + [ WRITE_16 ] = "WRITE_16", + [ WRITE_VERIFY_16 ] = "WRITE_VERIFY_16", + [ VERIFY_16 ] = "VERIFY_16", + [ SYNCHRONIZE_CACHE_16 ] = "SYNCHRONIZE_CACHE_16", + [ LOCATE_16 ] = "LOCATE_16", + [ WRITE_SAME_16 ] = "WRITE_SAME_16", + [ ERASE_16 ] = "ERASE_16", + [ SERVICE_ACTION_IN ] = "SERVICE_ACTION_IN", + [ WRITE_LONG_16 ] = "WRITE_LONG_16", + [ REPORT_LUNS ] = "REPORT_LUNS", + [ BLANK ] = "BLANK", + [ MAINTENANCE_IN ] = "MAINTENANCE_IN", + [ MAINTENANCE_OUT ] = "MAINTENANCE_OUT",Fixes missing WRITE_SAME_16, MAINTENANCE_IN, MAINTENANCE_OUT.
Yes.
[ MOVE_MEDIUM ] = "MOVE_MEDIUM", + [ LOAD_UNLOAD ] = "LOAD_UNLOAD", [ READ_12 ] = "READ_12", [ WRITE_12 ] = "WRITE_12", [ WRITE_VERIFY_12 ] = "WRITE_VERIFY_12", + [ VERIFY_12 ] = "VERIFY_12", [ SEARCH_HIGH_12 ] = "SEARCH_HIGH_12", [ SEARCH_EQUAL_12 ] = "SEARCH_EQUAL_12", [ SEARCH_LOW_12 ] = "SEARCH_LOW_12", [ READ_ELEMENT_STATUS ] = "READ_ELEMENT_STATUS", [ SEND_VOLUME_TAG ] = "SEND_VOLUME_TAG", - [ WRITE_LONG_2 ] = "WRITE_LONG_2", - - [ REPORT_DENSITY_SUPPORT ] = "REPORT_DENSITY_SUPPORT", - [ GET_CONFIGURATION ] = "GET_CONFIGURATION", - [ READ_16 ] = "READ_16", - [ WRITE_16 ] = "WRITE_16", - [ WRITE_VERIFY_16 ] = "WRITE_VERIFY_16", - [ SERVICE_ACTION_IN ] = "SERVICE_ACTION_IN", - [ REPORT_LUNS ] = "REPORT_LUNS", - [ LOAD_UNLOAD ] = "LOAD_UNLOAD", + [ READ_DEFECT_DATA ] = "READ_DEFECT_DATA",READ_DEFECT_DATA_12!
Yes.
OK, convinced. Will be doing a separate patch for removing the obsolete commands.[ SET_CD_SPEED ] = "SET_CD_SPEED", - [ BLANK ] = "BLANK", }; if (cmd>= ARRAY_SIZE(names) || names[cmd] == NULL) diff --git a/hw/scsi-defs.h b/hw/scsi-defs.h index 413cce0..458a797 100644 --- a/hw/scsi-defs.h +++ b/hw/scsi-defs.h @@ -26,6 +26,7 @@ #define TEST_UNIT_READY 0x00 #define REZERO_UNIT 0x01 +#define REWIND 0x01 #define REQUEST_SENSE 0x03 #define FORMAT_UNIT 0x04 #define READ_BLOCK_LIMITS 0x05 @@ -48,14 +49,14 @@ #define RECEIVE_DIAGNOSTIC 0x1c #define SEND_DIAGNOSTIC 0x1d #define ALLOW_MEDIUM_REMOVAL 0x1e - #define SET_WINDOW 0x24 -#define READ_CAPACITY 0x25 +#define READ_CAPACITY_10 0x25 #define READ_10 0x28 #define WRITE_10 0x2a #define SEEK_10 0x2b -#define WRITE_VERIFY 0x2e -#define VERIFY 0x2f +#define LOCATE_10 0x2b +#define WRITE_VERIFY_10 0x2e +#define VERIFY_10 0x2f #define SEARCH_HIGH 0x30 #define SEARCH_EQUAL 0x31 #define SEARCH_LOW 0x32 @@ -71,11 +72,14 @@ #define WRITE_BUFFER 0x3b #define READ_BUFFER 0x3c #define UPDATE_BLOCK 0x3d -#define READ_LONG 0x3e -#define WRITE_LONG 0x3f +#define READ_LONG_10 0x3e +#define WRITE_LONG_10 0x3f #define CHANGE_DEFINITION 0x40 -#define WRITE_SAME 0x41 +#define WRITE_SAME_10 0x41 +#define UNMAP 0x42 #define READ_TOC 0x43 +#define REPORT_DENSITY_SUPPORT 0x44 +#define GET_CONFIGURATION 0x46 #define LOG_SELECT 0x4c #define LOG_SENSE 0x4d #define MODE_SELECT_10 0x55 @@ -84,32 +88,40 @@ #define MODE_SENSE_10 0x5a #define PERSISTENT_RESERVE_IN 0x5e #define PERSISTENT_RESERVE_OUT 0x5f +#define VARLENGTH_CDB 0x7f +#define WRITE_FILEMARKS_16 0x80 +#define EXTENDED_COPY 0x83 +#define ATA_PASSTHROUGH 0x85 +#define ACCESS_CONTROL_IN 0x86 +#define ACCESS_CONTROL_OUT 0x87 +#define READ_16 0x88 +#define COMPARE_AND_WRITE 0x89 +#define WRITE_16 0x8a +#define WRITE_VERIFY_16 0x8e +#define VERIFY_16 0x8f +#define SYNCHRONIZE_CACHE_16 0x91 +#define LOCATE_16 0x92 #define WRITE_SAME_16 0x93 +#define ERASE_16 0x93 +#define SERVICE_ACTION_IN 0x9e +#define WRITE_LONG_16 0x9f +#define REPORT_LUNS 0xa0 +#define BLANK 0xa1 #define MAINTENANCE_IN 0xa3 #define MAINTENANCE_OUT 0xa4 #define MOVE_MEDIUM 0xa5 +#define LOAD_UNLOAD 0xa6 #define READ_12 0xa8 #define WRITE_12 0xaa #define WRITE_VERIFY_12 0xae +#define VERIFY_12 0xaf #define SEARCH_HIGH_12 0xb0 #define SEARCH_EQUAL_12 0xb1 #define SEARCH_LOW_12 0xb2 #define READ_ELEMENT_STATUS 0xb8 #define SEND_VOLUME_TAG 0xb6 -#define WRITE_LONG_2 0xea - -/* from hw/scsi-generic.c */ -#define REWIND 0x01 -#define REPORT_DENSITY_SUPPORT 0x44 -#define GET_CONFIGURATION 0x46 -#define READ_16 0x88 -#define WRITE_16 0x8a -#define WRITE_VERIFY_16 0x8e -#define SERVICE_ACTION_IN 0x9e -#define REPORT_LUNS 0xa0 -#define LOAD_UNLOAD 0xa6 -#define SET_CD_SPEED 0xbb -#define BLANK 0xa1 +#define READ_DEFECT_DATA_12 0xb7 +#define SET_CD_SPEED 0xbb /* * SAM Status codes @@ -154,6 +166,7 @@ #define TYPE_DISK 0x00 #define TYPE_TAPE 0x01 +#define TYPE_PRINTER 0x02 #define TYPE_PROCESSOR 0x03 /* HP scanners use this */ #define TYPE_WORM 0x04 /* Treated as ROM by our system */ #define TYPE_ROM 0x05 @@ -161,6 +174,9 @@ #define TYPE_MOD 0x07 /* Magneto-optical disk - * - treated as TYPE_DISK */ #define TYPE_MEDIUM_CHANGER 0x08 -#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ +#define TYPE_STORAGE_ARRAY 0x0c /* Storage array device */ +#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ +#define TYPE_RBC 0x0e /* Simplified Direct-Access Device */ +#define TYPE_OSD 0x11 /* Object-storage Device */ #define TYPE_NO_LUN 0x7f diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c index 05d14ab..2f7e0c9 100644 --- a/hw/scsi-disk.c +++ b/hw/scsi-disk.c @@ -836,7 +836,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf) case TEST_UNIT_READY: if (!bdrv_is_inserted(s->bs)) goto not_ready; - break; + break; case REQUEST_SENSE: if (req->cmd.xfer< 4) goto illegal_request; @@ -848,7 +848,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf) buflen = scsi_disk_emulate_inquiry(req, outbuf); if (buflen< 0) goto illegal_request; - break; + break; case MODE_SENSE: case MODE_SENSE_10: buflen = scsi_disk_emulate_mode_sense(req, outbuf); @@ -881,14 +881,14 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf) /* load/eject medium */ bdrv_eject(s->bs, !(req->cmd.buf[4]& 1)); } - break; + break; case ALLOW_MEDIUM_REMOVAL: bdrv_set_locked(s->bs, req->cmd.buf[4]& 1); - break; + break; case READ_CAPACITY: /* The normal LEN field for this command is zero. */ - memset(outbuf, 0, 8); - bdrv_get_geometry(s->bs,&nb_sectors); + memset(outbuf, 0, 8); + bdrv_get_geometry(s->bs,&nb_sectors); if (!nb_sectors) goto not_ready; nb_sectors /= s->cluster_size; @@ -908,7 +908,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf) outbuf[6] = s->cluster_size * 2; outbuf[7] = 0; buflen = 8; - break; + break; case SYNCHRONIZE_CACHE: ret = bdrv_flush(s->bs); if (ret< 0) { @@ -970,13 +970,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf) outbuf[3] = 8; buflen = 16; break; - case VERIFY: - break; - case REZERO_UNIT: - DPRINTF("Rezero Unit\n"); - if (!bdrv_is_inserted(s->bs)) { - goto not_ready; - }Functional change, the commit message lies. Separate patch? Matching update to scsi_cmd_table[] missing. Looks like we could purge REZERO_UNIT elsewhere, too.+ case VERIFY_10: break; default: scsi_command_complete(r, CHECK_CONDITION, SENSE_CODE(INVALID_OPCODE)); @@ -1052,14 +1046,13 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) case RELEASE_10: case START_STOP: case ALLOW_MEDIUM_REMOVAL: - case READ_CAPACITY: + case READ_CAPACITY_10: case SYNCHRONIZE_CACHE: case READ_TOC: case GET_CONFIGURATION: case SERVICE_ACTION_IN: case REPORT_LUNS: - case VERIFY: - case REZERO_UNIT: + case VERIFY_10: rc = scsi_disk_emulate_command(r, outbuf); if (rc< 0) { return 0; @@ -1082,7 +1075,7 @@ static int32_t scsi_send_command(SCSIRequest *req, uint8_t *buf) case WRITE_10: case WRITE_12: case WRITE_16: - case WRITE_VERIFY: + case WRITE_VERIFY_10: case WRITE_VERIFY_12: case WRITE_VERIFY_16: len = r->req.cmd.xfer / s->qdev.blocksize; diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c index 90345a7..17e83c7 100644 --- a/hw/scsi-generic.c +++ b/hw/scsi-generic.c @@ -406,7 +406,7 @@ static int get_blocksize(BlockDriverState *bdrv) memset(cmd, 0, sizeof(cmd)); memset(buf, 0, sizeof(buf)); - cmd[0] = READ_CAPACITY; + cmd[0] = READ_CAPACITY_10; memset(&io_header, 0, sizeof(io_header)); io_header.interface_id = 'S';
Cheers, Hannes -- Dr. Hannes Reinecke zSeries & Storage address@hidden +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
| [Prev in Thread] | Current Thread | [Next in Thread] |