[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v8 3/4] guest agent: qemu-ga daemon
From: |
Luiz Capitulino |
Subject: |
Re: [Qemu-devel] [PATCH v8 3/4] guest agent: qemu-ga daemon |
Date: |
Wed, 20 Jul 2011 14:56:03 -0300 |
On Tue, 19 Jul 2011 15:41:54 -0500
Michael Roth <address@hidden> wrote:
> This is the actual guest daemon, it listens for requests over a
> virtio-serial/isa-serial/unix socket channel and routes them through
> to dispatch routines, and writes the results back to the channel in
> a manner similar to QMP.
>
> A shorthand invocation:
>
> qemu-ga -d
>
> Is equivalent to:
>
> qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
> -f /var/run/qemu-ga.pid -d
>
> Signed-off-by: Michael Roth <address@hidden>
> ---
> Makefile | 8 +-
> configure | 1 +
> qemu-ga.c | 667
> ++++++++++++++++++++++++++++++++++++++++++++++++
> qga/guest-agent-core.h | 4 +
> 4 files changed, 677 insertions(+), 3 deletions(-)
> create mode 100644 qemu-ga.c
>
> diff --git a/Makefile b/Makefile
> index b8cdf0e..0d2e33d 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -140,7 +140,7 @@ endif
> ######################################################################
>
> qemu-img.o: qemu-img-cmds.h
> -qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o cmd.o: $(GENERATED_HEADERS)
> +qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o cmd.o qemu-ga.o:
> $(GENERATED_HEADERS)
>
> qemu-img$(EXESUF): qemu-img.o qemu-tool.o qemu-error.o $(oslib-obj-y)
> $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y)
> qemu-timer-common.o
>
> @@ -184,13 +184,15 @@ test-qmp-commands: test-qmp-commands.o qfloat.o qint.o
> qdict.o qstring.o qlist.o
>
> QGALIB=qga/guest-agent-command-state.o
>
> +qemu-ga$(EXESUF): qemu-ga.o $(QGALIB) qemu-tool.o qemu-error.o error.o
> $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y)
> $(version-obj-y) $(qapi-obj-y) qemu-timer-common.o qemu-sockets.o module.o
> qapi/qmp-dispatch.o qapi/qmp-registry.o
> +
> QEMULIBS=libhw32 libhw64 libuser libdis libdis-user
>
> clean:
> # avoid old build problems by removing potentially incorrect old files
> rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h
> gen-op-arm.h
> rm -f qemu-options.def
> - rm -f *.o *.d *.a *.lo $(TOOLS) TAGS cscope.* *.pod *~ */*~
> + rm -f *.o *.d *.a *.lo $(TOOLS) qemu-ga TAGS cscope.* *.pod *~ */*~
> rm -Rf .libs
> rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
> net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d qapi/*.o qapi/*.d qga/*.o
> qga/*.d
> rm -f qemu-img-cmds.h
> @@ -386,4 +388,4 @@ tarbin:
> $(mandir)/man8/qemu-nbd.8
>
> # Include automatically generated dependency files
> --include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d ui/*.d
> qapi/*.d)
> +-include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d ui/*.d
> qapi/*.d qga/*.d)
> diff --git a/configure b/configure
> index 6a03002..445f674 100755
> --- a/configure
> +++ b/configure
> @@ -2532,6 +2532,7 @@ if test "$softmmu" = yes ; then
> tools="qemu-img\$(EXESUF) qemu-io\$(EXESUF) $tools"
> if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then
> tools="qemu-nbd\$(EXESUF) $tools"
> + tools="qemu-ga\$(EXESUF) $tools"
> if [ "$check_utests" = "yes" ]; then
> tools="check-qint check-qstring check-qdict check-qlist $tools"
> tools="check-qfloat check-qjson $tools"
> diff --git a/qemu-ga.c b/qemu-ga.c
> new file mode 100644
> index 0000000..eb09100
> --- /dev/null
> +++ b/qemu-ga.c
> @@ -0,0 +1,667 @@
> +/*
> + * QEMU Guest Agent
> + *
> + * Copyright IBM Corp. 2011
> + *
> + * Authors:
> + * Adam Litke <address@hidden>
> + * Michael Roth <address@hidden>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +#include <stdlib.h>
> +#include <stdio.h>
> +#include <stdbool.h>
> +#include <glib.h>
> +#include <gio/gio.h>
> +#include <getopt.h>
> +#include <termios.h>
> +#include <syslog.h>
> +#include "qemu_socket.h"
> +#include "json-streamer.h"
> +#include "json-parser.h"
> +#include "qint.h"
> +#include "qjson.h"
> +#include "qga/guest-agent-core.h"
> +#include "module.h"
> +#include "signal.h"
> +#include "qerror.h"
> +#include "error_int.h"
> +
> +#define QGA_VIRTIO_PATH_DEFAULT "/dev/virtio-ports/org.qemu.guest_agent.0"
> +#define QGA_PIDFILE_DEFAULT "/var/run/qemu-ga.pid"
> +#define QGA_BAUDRATE_DEFAULT B38400 /* for isa-serial channels */
> +#define QGA_TIMEOUT_DEFAULT 30*1000 /* ms */
> +
> +struct GAState {
> + JSONMessageParser parser;
> + GMainLoop *main_loop;
> + guint conn_id;
> + GSocket *conn_sock;
> + GIOChannel *conn_channel;
> + guint listen_id;
> + GSocket *listen_sock;
> + GIOChannel *listen_channel;
> + const char *path;
> + const char *method;
> + bool virtio; /* fastpath to check for virtio to deal with poll() quirks
> */
> + GACommandState *command_state;
> + GLogLevelFlags log_level;
> + FILE *log_file;
> + bool logging_enabled;
> +};
> +
> +static struct GAState *ga_state;
> +
> +static void quit_handler(int sig)
> +{
> + g_debug("recieved signal num %d, quitting", sig);
> +
> + if (g_main_loop_is_running(ga_state->main_loop)) {
> + g_main_loop_quit(ga_state->main_loop);
> + }
> +}
> +
> +static void register_signal_handlers(void)
> +{
> + struct sigaction sigact;
> + int ret;
> +
> + memset(&sigact, 0, sizeof(struct sigaction));
> + sigact.sa_handler = quit_handler;
> +
> + ret = sigaction(SIGINT, &sigact, NULL);
> + if (ret == -1) {
> + g_error("error configuring signal handler: %s", strerror(errno));
> + exit(EXIT_FAILURE);
> + }
> + ret = sigaction(SIGTERM, &sigact, NULL);
> + if (ret == -1) {
> + g_error("error configuring signal handler: %s", strerror(errno));
> + }
> +}
> +
> +static void usage(const char *cmd)
> +{
> + printf(
> +"Usage: %s -c <channel_opts>\n"
> +"QEMU Guest Agent %s\n"
> +"\n"
> +" -m, --method transport method: one of unix-listen, virtio-serial,
> or\n"
> +" isa-serial (virtio-serial is the default)\n"
> +" -p, --path device/socket path (%s is the default for
> virtio-serial)\n"
> +" -l, --logfile set logfile path, logs to stderr by default\n"
> +" -f, --pidfile specify pidfile (default is %s)\n"
> +" -v, --verbose log extra debugging information\n"
> +" -V, --version print version information and exit\n"
> +" -d, --daemonize become a daemon\n"
> +" -h, --help display this help and exit\n"
> +"\n"
> +"Report bugs to <address@hidden>\n"
> + , cmd, QGA_VERSION, QGA_VIRTIO_PATH_DEFAULT, QGA_PIDFILE_DEFAULT);
> +}
> +
> +static void conn_channel_close(GAState *s);
> +
> +static const char *ga_log_level_str(GLogLevelFlags level)
> +{
> + switch (level & G_LOG_LEVEL_MASK) {
> + case G_LOG_LEVEL_ERROR:
> + return "error";
> + case G_LOG_LEVEL_CRITICAL:
> + return "critical";
> + case G_LOG_LEVEL_WARNING:
> + return "warning";
> + case G_LOG_LEVEL_MESSAGE:
> + return "message";
> + case G_LOG_LEVEL_INFO:
> + return "info";
> + case G_LOG_LEVEL_DEBUG:
> + return "debug";
> + default:
> + return "user";
> + }
> +}
> +
> +bool ga_logging_enabled(GAState *s)
> +{
> + return s->logging_enabled;
> +}
> +
> +void ga_disable_logging(GAState *s)
> +{
> + s->logging_enabled = false;
> +}
> +
> +void ga_enable_logging(GAState *s)
> +{
> + s->logging_enabled = true;
> +}
> +
> +static void ga_log(const gchar *domain, GLogLevelFlags level,
> + const gchar *msg, gpointer opaque)
> +{
> + GAState *s = opaque;
> + GTimeVal time;
> + const char *level_str = ga_log_level_str(level);
> +
> + if (!ga_logging_enabled(s)) {
> + return;
> + }
> +
> + level &= G_LOG_LEVEL_MASK;
> + if (g_strcmp0(domain, "syslog") == 0) {
> + syslog(LOG_INFO, "%s: %s", level_str, msg);
> + } else if (level & s->log_level) {
> + g_get_current_time(&time);
> + fprintf(s->log_file,
> + "%lu.%lu: %s: %s\n", time.tv_sec, time.tv_usec, level_str,
> msg);
> + fflush(s->log_file);
> + }
> +}
> +
> +static void become_daemon(const char *pidfile)
> +{
> + pid_t pid, sid;
> + int pidfd;
> + char *pidstr = NULL;
> +
> + pid = fork();
> + if (pid < 0) {
> + exit(EXIT_FAILURE);
> + }
> + if (pid > 0) {
> + exit(EXIT_SUCCESS);
> + }
> +
> + pidfd = open(pidfile, O_CREAT|O_WRONLY|O_EXCL, S_IRUSR|S_IWUSR);
> + if (pidfd == -1) {
> + g_critical("Cannot create pid file, %s", strerror(errno));
> + exit(EXIT_FAILURE);
> + }
> +
> + if (asprintf(&pidstr, "%d", getpid()) == -1) {
> + g_critical("Cannot allocate memory");
> + goto fail;
> + }
> + if (write(pidfd, pidstr, strlen(pidstr)) != strlen(pidstr)) {
> + free(pidstr);
> + g_critical("Failed to write pid file");
> + goto fail;
> + }
> +
> + umask(0);
> + sid = setsid();
> + if (sid < 0) {
> + goto fail;
> + }
> + if ((chdir("/")) < 0) {
> + goto fail;
> + }
> +
> + close(STDIN_FILENO);
> + close(STDOUT_FILENO);
> + close(STDERR_FILENO);
> + free(pidstr);
> + return;
> +
> +fail:
> + unlink(pidfile);
> + g_critical("failed to daemonize");
> + exit(EXIT_FAILURE);
> +}
> +
> +static int conn_channel_send_buf(GIOChannel *channel, const char *buf,
> + gsize count)
> +{
> + GError *err = NULL;
> + gsize written = 0;
> + GIOStatus status;
> +
> + while (count) {
> + status = g_io_channel_write_chars(channel, buf, count, &written,
> &err);
> + g_debug("sending data, count: %d", (int)count);
> + if (err != NULL) {
> + g_warning("error sending newline: %s", err->message);
> + return err->code;
> + }
> + if (status == G_IO_STATUS_ERROR || status == G_IO_STATUS_EOF) {
> + return -EPIPE;
> + }
> +
> + if (status == G_IO_STATUS_NORMAL) {
> + count -= written;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int conn_channel_send_payload(GIOChannel *channel, QObject *payload)
> +{
> + int ret = 0;
> + const char *buf;
> + QString *payload_qstr;
> + GError *err = NULL;
> +
> + g_assert(payload && channel);
> +
> + payload_qstr = qobject_to_json(payload);
> + if (!payload_qstr) {
> + return -EINVAL;
> + }
> +
> + qstring_append_chr(payload_qstr, '\n');
> + buf = qstring_get_str(payload_qstr);
> + ret = conn_channel_send_buf(channel, buf, strlen(buf));
> + if (ret) {
> + goto out_free;
> + }
> +
> + g_io_channel_flush(channel, &err);
> + if (err != NULL) {
> + g_warning("error flushing payload: %s", err->message);
> + ret = err->code;
> + goto out_free;
> + }
> +
> +out_free:
> + QDECREF(payload_qstr);
> + if (err) {
> + g_error_free(err);
> + }
> + return ret;
> +}
> +
> +static void process_command(GAState *s, QDict *req)
> +{
> + QObject *rsp = NULL;
> + int ret;
> +
> + g_assert(req);
> + g_debug("processing command");
> + rsp = qmp_dispatch(QOBJECT(req));
> + if (rsp) {
> + ret = conn_channel_send_payload(s->conn_channel, rsp);
> + if (ret) {
> + g_warning("error sending payload: %s", strerror(ret));
> + }
> + qobject_decref(rsp);
> + } else {
> + g_warning("error getting response");
> + }
> +}
> +
> +/* handle requests/control events coming in over the channel */
> +static void process_event(JSONMessageParser *parser, QList *tokens)
> +{
> + GAState *s = container_of(parser, GAState, parser);
> + QObject *obj;
> + QDict *qdict;
> + Error *err = NULL;
> + int ret;
> +
> + g_assert(s && parser);
> +
> + g_debug("process_event: called");
> + obj = json_parser_parse_err(tokens, NULL, &err);
> + if (err || !obj || qobject_type(obj) != QTYPE_QDICT) {
> + qobject_decref(obj);
> + qdict = qdict_new();
> + if (!err) {
> + g_warning("failed to parse event: unknown error");
> + error_set(&err, QERR_JSON_PARSING);
> + } else {
> + g_warning("failed to parse event: %s", error_get_pretty(err));
> + }
> + qdict_put_obj(qdict, "error", error_get_qobject(err));
> + error_free(err);
> + } else {
> + qdict = qobject_to_qdict(obj);
> + }
> +
> + g_assert(qdict);
> +
> + /* handle host->guest commands */
> + if (qdict_haskey(qdict, "execute")) {
> + process_command(s, qdict);
> + } else {
> + if (!qdict_haskey(qdict, "error")) {
> + QDECREF(qdict);
> + qdict = qdict_new();
> + g_warning("unrecognized payload format");
> + error_set(&err, QERR_UNSUPPORTED);
> + qdict_put_obj(qdict, "error", error_get_qobject(err));
> + error_free(err);
> + }
> + ret = conn_channel_send_payload(s->conn_channel, QOBJECT(qdict));
> + if (ret) {
> + g_warning("error sending payload: %s", strerror(ret));
> + }
> + }
> +
> + QDECREF(qdict);
> +}
> +
> +static gboolean conn_channel_read(GIOChannel *channel, GIOCondition
> condition,
> + gpointer data)
> +{
> + GAState *s = data;
> + gchar buf[1024];
> + gsize count;
> + GError *err = NULL;
> + memset(buf, 0, 1024);
> + GIOStatus status = g_io_channel_read_chars(channel, buf, 1024,
> + &count, &err);
> + if (err != NULL) {
> + g_warning("error reading channel: %s", err->message);
> + conn_channel_close(s);
> + g_error_free(err);
> + return false;
> + }
> + switch (status) {
> + case G_IO_STATUS_ERROR:
> + g_warning("problem");
> + return false;
> + case G_IO_STATUS_NORMAL:
> + g_debug("read data, count: %d, data: %s", (int)count, buf);
> + json_message_parser_feed(&s->parser, (char *)buf, (int)count);
> + case G_IO_STATUS_AGAIN:
> + /* virtio causes us to spin here when no process is attached to
> + * host-side chardev. sleep a bit to mitigate this
> + */
> + if (s->virtio) {
> + usleep(100*1000);
> + }
> + return true;
> + case G_IO_STATUS_EOF:
> + g_debug("received EOF");
> + conn_channel_close(s);
> + if (s->virtio) {
> + return true;
> + }
> + return false;
> + default:
> + g_warning("unknown channel read status, closing");
> + conn_channel_close(s);
> + return false;
> + }
> + return true;
> +}
> +
> +static int conn_channel_add(GAState *s, int fd)
> +{
> + GIOChannel *conn_channel;
> + guint conn_id;
> + GError *err = NULL;
> +
> + g_assert(s && !s->conn_channel);
> + conn_channel = g_io_channel_unix_new(fd);
> + g_assert(conn_channel);
> + g_io_channel_set_encoding(conn_channel, NULL, &err);
> + if (err != NULL) {
> + g_warning("error setting channel encoding to binary");
> + g_error_free(err);
> + return -1;
> + }
> + conn_id = g_io_add_watch(conn_channel, G_IO_IN | G_IO_HUP,
> + conn_channel_read, s);
> + if (err != NULL) {
> + g_warning("error adding io watch: %s", err->message);
> + g_error_free(err);
> + return -1;
> + }
> + s->conn_channel = conn_channel;
> + s->conn_id = conn_id;
> + return 0;
> +}
> +
> +static gboolean listen_channel_accept(GIOChannel *channel,
> + GIOCondition condition, gpointer data)
> +{
> + GAState *s = data;
> + GError *err = NULL;
> + g_assert(channel != NULL);
> + int ret;
> + bool accepted = false;
> +
> + s->conn_sock = g_socket_accept(s->listen_sock, NULL, &err);
> + if (err != NULL) {
> + g_warning("error converting fd to gsocket: %s", err->message);
> + g_error_free(err);
> + goto out;
> + }
> + ret = conn_channel_add(s, g_socket_get_fd(s->conn_sock));
> + if (ret) {
> + g_warning("error setting up connection");
> + goto out;
> + }
> + accepted = true;
> +
> +out:
> + /* only accept 1 connection at a time */
> + return !accepted;
> +}
> +
> +/* start polling for readable events on listen fd, new==true
> + * indicates we should use the existing s->listen_channel
> + */
> +static int listen_channel_add(GAState *s, int listen_fd, bool new)
> +{
> + GError *err = NULL;
> + guint listen_id;
> +
> + if (new) {
> + s->listen_channel = g_io_channel_unix_new(listen_fd);
> + if (s->listen_sock) {
> + g_object_unref(s->listen_sock);
> + }
> + s->listen_sock = g_socket_new_from_fd(listen_fd, &err);
> + if (err != NULL) {
> + g_warning("error converting fd to gsocket: %s", err->message);
> + g_error_free(err);
> + return -1;
> + }
> + }
> + listen_id = g_io_add_watch(s->listen_channel, G_IO_IN,
> + listen_channel_accept, s);
> + if (err != NULL) {
> + g_warning("error adding io watch: %s", err->message);
> + g_error_free(err);
> + return -1;
> + }
> + return 0;
I'm getting the following error when building this on a F15 guest:
qemu-ga.c: In function ‘listen_channel_add’:
qemu-ga.c:453:11: error: variable ‘listen_id’ set but not used
[-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
g_io_add_watch() doesn't seem to return an error. So if the fix is just to
drop 'listen_id' and the last if statement altogether I can do it myself,
otherwise you can send me only this patch.
The series looks good otherwise.
> +}
> +
> +/* cleanup state for closed connection/session, start accepting new
> + * connections if we're in listening mode
> + */
> +static void conn_channel_close(GAState *s)
> +{
> + if (strcmp(s->method, "unix-listen") == 0) {
> + g_io_channel_shutdown(s->conn_channel, true, NULL);
> + g_object_unref(s->conn_sock);
> + s->conn_sock = NULL;
> + listen_channel_add(s, 0, false);
> + } else if (strcmp(s->method, "virtio-serial") == 0) {
> + /* we spin on EOF for virtio-serial, so back off a bit. also,
> + * dont close the connection in this case, it'll resume normal
> + * operation when another process connects to host chardev
> + */
> + usleep(100*1000);
> + goto out_noclose;
> + }
> + g_io_channel_unref(s->conn_channel);
> + s->conn_channel = NULL;
> + s->conn_id = 0;
> +out_noclose:
> + return;
> +}
> +
> +static void init_guest_agent(GAState *s)
> +{
> + struct termios tio;
> + int ret, fd;
> +
> + if (s->method == NULL) {
> + /* try virtio-serial as our default */
> + s->method = "virtio-serial";
> + }
> +
> + if (s->path == NULL) {
> + if (strcmp(s->method, "virtio-serial") != 0) {
> + g_critical("must specify a path for this channel");
> + exit(EXIT_FAILURE);
> + }
> + /* try the default path for the virtio-serial port */
> + s->path = QGA_VIRTIO_PATH_DEFAULT;
> + }
> +
> + if (strcmp(s->method, "virtio-serial") == 0) {
> + s->virtio = true;
> + fd = qemu_open(s->path, O_RDWR | O_NONBLOCK | O_ASYNC);
> + if (fd == -1) {
> + g_critical("error opening channel: %s", strerror(errno));
> + exit(EXIT_FAILURE);
> + }
> + ret = conn_channel_add(s, fd);
> + if (ret) {
> + g_critical("error adding channel to main loop");
> + exit(EXIT_FAILURE);
> + }
> + } else if (strcmp(s->method, "isa-serial") == 0) {
> + fd = qemu_open(s->path, O_RDWR | O_NOCTTY);
> + if (fd == -1) {
> + g_critical("error opening channel: %s", strerror(errno));
> + exit(EXIT_FAILURE);
> + }
> + tcgetattr(fd, &tio);
> + /* set up serial port for non-canonical, dumb byte streaming */
> + tio.c_iflag &= ~(IGNBRK | BRKINT | IGNPAR | PARMRK | INPCK | ISTRIP |
> + INLCR | IGNCR | ICRNL | IXON | IXOFF | IXANY |
> + IMAXBEL);
> + tio.c_oflag = 0;
> + tio.c_lflag = 0;
> + tio.c_cflag |= QGA_BAUDRATE_DEFAULT;
> + /* 1 available byte min or reads will block (we'll set non-blocking
> + * elsewhere, else we have to deal with read()=0 instead)
> + */
> + tio.c_cc[VMIN] = 1;
> + tio.c_cc[VTIME] = 0;
> + /* flush everything waiting for read/xmit, it's garbage at this
> point */
> + tcflush(fd, TCIFLUSH);
> + tcsetattr(fd, TCSANOW, &tio);
> + ret = conn_channel_add(s, fd);
> + if (ret) {
> + g_error("error adding channel to main loop");
> + }
> + } else if (strcmp(s->method, "unix-listen") == 0) {
> + fd = unix_listen(s->path, NULL, strlen(s->path));
> + if (fd == -1) {
> + g_critical("error opening path: %s", strerror(errno));
> + exit(EXIT_FAILURE);
> + }
> + ret = listen_channel_add(s, fd, true);
> + if (ret) {
> + g_critical("error binding/listening to specified socket");
> + exit(EXIT_FAILURE);
> + }
> + } else {
> + g_critical("unsupported channel method/type: %s", s->method);
> + exit(EXIT_FAILURE);
> + }
> +
> + json_message_parser_init(&s->parser, process_event);
> + s->main_loop = g_main_loop_new(NULL, false);
> +}
> +
> +int main(int argc, char **argv)
> +{
> + const char *sopt = "hVvdm:p:l:f:";
> + const char *method = NULL, *path = NULL, *pidfile = QGA_PIDFILE_DEFAULT;
> + const struct option lopt[] = {
> + { "help", 0, NULL, 'h' },
> + { "version", 0, NULL, 'V' },
> + { "logfile", 0, NULL, 'l' },
> + { "pidfile", 0, NULL, 'f' },
> + { "verbose", 0, NULL, 'v' },
> + { "method", 0, NULL, 'm' },
> + { "path", 0, NULL, 'p' },
> + { "daemonize", 0, NULL, 'd' },
> + { NULL, 0, NULL, 0 }
> + };
> + int opt_ind = 0, ch, daemonize = 0;
> + GLogLevelFlags log_level = G_LOG_LEVEL_ERROR | G_LOG_LEVEL_CRITICAL;
> + FILE *log_file = stderr;
> + GAState *s;
> +
> + while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) {
> + switch (ch) {
> + case 'm':
> + method = optarg;
> + break;
> + case 'p':
> + path = optarg;
> + break;
> + case 'l':
> + log_file = fopen(optarg, "a");
> + if (!log_file) {
> + g_critical("unable to open specified log file: %s",
> + strerror(errno));
> + return EXIT_FAILURE;
> + }
> + break;
> + case 'f':
> + pidfile = optarg;
> + break;
> + case 'v':
> + /* enable all log levels */
> + log_level = G_LOG_LEVEL_MASK;
> + break;
> + case 'V':
> + printf("QEMU Guest Agent %s\n", QGA_VERSION);
> + return 0;
> + case 'd':
> + daemonize = 1;
> + break;
> + case 'h':
> + usage(argv[0]);
> + return 0;
> + case '?':
> + g_print("Unknown option, try '%s --help' for more
> information.\n",
> + argv[0]);
> + return EXIT_FAILURE;
> + }
> + }
> +
> + if (daemonize) {
> + g_debug("starting daemon");
> + become_daemon(pidfile);
> + }
> +
> + g_type_init();
> + g_thread_init(NULL);
> +
> + s = qemu_mallocz(sizeof(GAState));
> + s->conn_id = 0;
> + s->conn_channel = NULL;
> + s->path = path;
> + s->method = method;
> + s->log_file = log_file;
> + s->log_level = log_level;
> + g_log_set_default_handler(ga_log, s);
> + g_log_set_fatal_mask(NULL, G_LOG_LEVEL_ERROR);
> + s->logging_enabled = true;
> + ga_state = s;
> +
> + module_call_init(MODULE_INIT_QAPI);
> + init_guest_agent(ga_state);
> + register_signal_handlers();
> +
> + g_main_loop_run(ga_state->main_loop);
> +
> + unlink(pidfile);
> +
> + return 0;
> +}
> diff --git a/qga/guest-agent-core.h b/qga/guest-agent-core.h
> index 688f120..66d1729 100644
> --- a/qga/guest-agent-core.h
> +++ b/qga/guest-agent-core.h
> @@ -15,6 +15,7 @@
>
> #define QGA_VERSION "1.0"
>
> +typedef struct GAState GAState;
> typedef struct GACommandState GACommandState;
>
> void ga_command_state_add(GACommandState *cs,
> @@ -23,3 +24,6 @@ void ga_command_state_add(GACommandState *cs,
> void ga_command_state_init_all(GACommandState *cs);
> void ga_command_state_cleanup_all(GACommandState *cs);
> GACommandState *ga_command_state_new(void);
> +bool ga_logging_enabled(GAState *s);
> +void ga_disable_logging(GAState *s);
> +void ga_enable_logging(GAState *s);
- [Qemu-devel] [QAPI+QGA 3/3] QEMU Guest Agent (virtagent) v8, Michael Roth, 2011/07/19
- [Qemu-devel] [PATCH v8 1/4] qerror: add QERR_JSON_PARSE_ERROR to qerror.c, Michael Roth, 2011/07/19
- [Qemu-devel] [PATCH v8 2/4] guest agent: command state class, Michael Roth, 2011/07/19
- [Qemu-devel] [PATCH v8 3/4] guest agent: qemu-ga daemon, Michael Roth, 2011/07/19
- Re: [Qemu-devel] [PATCH v8 3/4] guest agent: qemu-ga daemon,
Luiz Capitulino <=
- Re: [Qemu-devel] [PATCH v8 3/4] guest agent: qemu-ga daemon, Michael Roth, 2011/07/20
- Re: [Qemu-devel] [PATCH v8 3/4] guest agent: qemu-ga daemon, Luiz Capitulino, 2011/07/20
- Re: [Qemu-devel] [PATCH v8 3/4] guest agent: qemu-ga daemon, Michael Roth, 2011/07/20
- Re: [Qemu-devel] [PATCH v8 3/4] guest agent: qemu-ga daemon, Michael Roth, 2011/07/20
- Re: [Qemu-devel] [PATCH v8 3/4] guest agent: qemu-ga daemon, Luiz Capitulino, 2011/07/20
[Qemu-devel] [PATCH] guest agent: qemu-ga, remove unused variables, Michael Roth, 2011/07/20
[Qemu-devel] [PATCH] guest agent: qemu-ga daemon, Michael Roth, 2011/07/20