qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [RFC v5 72/86] onenand: convert to memory API


From: Avi Kivity
Subject: [Qemu-devel] [RFC v5 72/86] onenand: convert to memory API
Date: Wed, 20 Jul 2011 19:50:22 +0300

Signed-off-by: Avi Kivity <address@hidden>
---
 hw/onenand.c |   70 +++++++++++++++++++++++++++++++--------------------------
 1 files changed, 38 insertions(+), 32 deletions(-)

diff --git a/hw/onenand.c b/hw/onenand.c
index 71c1ab4..fe53090 100644
--- a/hw/onenand.c
+++ b/hw/onenand.c
@@ -23,6 +23,7 @@
 #include "flash.h"
 #include "irq.h"
 #include "blockdev.h"
+#include "memory.h"
 
 /* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */
 #define PAGE_SHIFT     11
@@ -41,10 +42,12 @@ typedef struct {
     uint8_t *image;
     uint8_t *otp;
     uint8_t *current;
-    ram_addr_t ram;
+    MemoryRegion ram;
+    MemoryRegion mapped_ram;
     uint8_t *boot[2];
     uint8_t *data[2][2];
-    int iomemtype;
+    MemoryRegion iomem;
+    MemoryRegion container;
     int cycle;
     int otpmode;
 
@@ -96,31 +99,38 @@ enum {
     ONEN_LOCK_UNLOCKED = 1 << 2,
 };
 
+static void onenand_mem_setup(OneNANDState *s)
+{
+    /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
+     * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
+     * write boot commands.  Also take note of the BWPS bit.  */
+    memory_region_init(&s->container, "onenand", 0x10000 << s->shift);
+    memory_region_add_subregion(&s->container, 0, &s->iomem);
+    memory_region_init_alias(&s->mapped_ram, "onenand-mapped-ram",
+                             &s->ram, 0x0200 << s->shift,
+                             0xbe00 << s->shift);
+    memory_region_add_subregion_overlap(&s->container,
+                                        0x0200 << s->shift,
+                                        &s->mapped_ram,
+                                        1);
+}
+
+#include "exec-memory.h"
+
 void onenand_base_update(void *opaque, target_phys_addr_t new)
 {
     OneNANDState *s = (OneNANDState *) opaque;
 
     s->base = new;
 
-    /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
-     * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
-     * write boot commands.  Also take note of the BWPS bit.  */
-    cpu_register_physical_memory(s->base + (0x0000 << s->shift),
-                    0x0200 << s->shift, s->iomemtype);
-    cpu_register_physical_memory(s->base + (0x0200 << s->shift),
-                    0xbe00 << s->shift,
-                    (s->ram +(0x0200 << s->shift)) | IO_MEM_RAM);
-    if (s->iomemtype)
-        cpu_register_physical_memory_offset(s->base + (0xc000 << s->shift),
-                    0x4000 << s->shift, s->iomemtype, (0xc000 << s->shift));
+    memory_region_add_subregion(get_system_memory(), s->base, &s->container);
 }
 
 void onenand_base_unmap(void *opaque)
 {
     OneNANDState *s = (OneNANDState *) opaque;
 
-    cpu_register_physical_memory(s->base,
-                    0x10000 << s->shift, IO_MEM_UNASSIGNED);
+    memory_region_del_subregion(get_system_memory(), &s->container);
 }
 
 static void onenand_intr_update(OneNANDState *s)
@@ -443,7 +453,8 @@ static void onenand_command(OneNANDState *s, int cmd)
     onenand_intr_update(s);
 }
 
-static uint32_t onenand_read(void *opaque, target_phys_addr_t addr)
+static uint64_t onenand_read(void *opaque, target_phys_addr_t addr,
+                             unsigned size)
 {
     OneNANDState *s = (OneNANDState *) opaque;
     int offset = addr >> s->shift;
@@ -508,7 +519,7 @@ static uint32_t onenand_read(void *opaque, 
target_phys_addr_t addr)
 }
 
 static void onenand_write(void *opaque, target_phys_addr_t addr,
-                uint32_t value)
+                          uint64_t value, unsigned size)
 {
     OneNANDState *s = (OneNANDState *) opaque;
     int offset = addr >> s->shift;
@@ -547,7 +558,7 @@ static void onenand_write(void *opaque, target_phys_addr_t 
addr,
             break;
 
         default:
-            fprintf(stderr, "%s: unknown OneNAND boot command %x\n",
+            fprintf(stderr, "%s: unknown OneNAND boot command %"PRIx64"\n",
                             __FUNCTION__, value);
         }
         break;
@@ -603,16 +614,10 @@ static void onenand_write(void *opaque, 
target_phys_addr_t addr,
     }
 }
 
-static CPUReadMemoryFunc * const onenand_readfn[] = {
-    onenand_read,      /* TODO */
-    onenand_read,
-    onenand_read,
-};
-
-static CPUWriteMemoryFunc * const onenand_writefn[] = {
-    onenand_write,     /* TODO */
-    onenand_write,
-    onenand_write,
+static const MemoryRegionOps onenand_ops = {
+    .read = onenand_read,
+    .write = onenand_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
 void *onenand_init(uint32_t id, int regshift, qemu_irq irq)
@@ -630,8 +635,8 @@ void *onenand_init(uint32_t id, int regshift, qemu_irq irq)
     s->secs = size >> 9;
     s->blockwp = qemu_malloc(s->blocks);
     s->density_mask = (id & (1 << 11)) ? (1 << (6 + ((id >> 12) & 7))) : 0;
-    s->iomemtype = cpu_register_io_memory(onenand_readfn,
-                    onenand_writefn, s, DEVICE_NATIVE_ENDIAN);
+    memory_region_init_io(&s->iomem, &onenand_ops, s, "onenand",
+                          0x10000 << s->shift);
     if (!dinfo)
         s->image = memset(qemu_malloc(size + (size >> 5)),
                         0xff, size + (size >> 5));
@@ -639,14 +644,15 @@ void *onenand_init(uint32_t id, int regshift, qemu_irq 
irq)
         s->bdrv = dinfo->bdrv;
     s->otp = memset(qemu_malloc((64 + 2) << PAGE_SHIFT),
                     0xff, (64 + 2) << PAGE_SHIFT);
-    s->ram = qemu_ram_alloc(NULL, "onenand.ram", 0xc000 << s->shift);
-    ram = qemu_get_ram_ptr(s->ram);
+    memory_region_init_ram(&s->ram, NULL, "onenand.ram", 0xc000 << s->shift);
+    ram = memory_region_get_ram_ptr(&s->ram);
     s->boot[0] = ram + (0x0000 << s->shift);
     s->boot[1] = ram + (0x8000 << s->shift);
     s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);
     s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);
     s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);
     s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);
+    onenand_mem_setup(s);
 
     onenand_reset(s, 1);
 
-- 
1.7.5.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]