qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 2/3] ide: allow other dma comands than read and writ


From: Christoph Hellwig
Subject: [Qemu-devel] [PATCH 2/3] ide: allow other dma comands than read and write
Date: Tue, 3 May 2011 14:06:40 +0200
User-agent: Mutt/1.5.17 (2007-11-01)

Replace the is_read flag with a dma_cmd flag to allow the dma and
restart logic to handler other commands like TRIM.

Signed-off-by: Christoph Hellwig <address@hidden>

Index: qemu/hw/ide/core.c
===================================================================
--- qemu.orig/hw/ide/core.c     2011-05-03 11:32:14.727336751 +0200
+++ qemu/hw/ide/core.c  2011-05-03 11:35:56.259469943 +0200
@@ -473,7 +473,7 @@ handle_rw_error:
     if (ret < 0) {
         int op = BM_STATUS_DMA_RETRY;
 
-        if (s->is_read)
+        if (s->dma_cmd == IDE_DMA_READ)
             op |= BM_STATUS_RETRY_READ;
         if (ide_handle_rw_error(s, -ret, op)) {
             return;
@@ -483,7 +483,7 @@ handle_rw_error:
     n = s->io_buffer_size >> 9;
     sector_num = ide_get_sector(s);
     if (n > 0) {
-        dma_buf_commit(s, s->is_read);
+        dma_buf_commit(s, ide_cmd_is_read(s));
         sector_num += n;
         ide_set_sector(s, sector_num);
         s->nsector -= n;
@@ -500,20 +500,23 @@ handle_rw_error:
     n = s->nsector;
     s->io_buffer_index = 0;
     s->io_buffer_size = n * 512;
-    if (s->bus->dma->ops->prepare_buf(s->bus->dma, s->is_read) == 0)
+    if (s->bus->dma->ops->prepare_buf(s->bus->dma, ide_cmd_is_read(s)) == 0)
         goto eot;
 
 #ifdef DEBUG_AIO
-    printf("ide_dma_cb: sector_num=%" PRId64 " n=%d, is_read=%d\n",
-           sector_num, n, s->is_read);
+    printf("ide_dma_cb: sector_num=%" PRId64 " n=%d, cmd_cmd=%d\n",
+           sector_num, n, s->dma_cmd);
 #endif
 
-    if (s->is_read) {
+    switch (s->dma_cmd) {
+    case IDE_DMA_READ:
         s->bus->dma->aiocb = dma_bdrv_read(s->bs, &s->sg, sector_num,
                                            ide_dma_cb, s);
-    } else {
+        break;
+    case IDE_DMA_WRITE:
         s->bus->dma->aiocb = dma_bdrv_write(s->bs, &s->sg, sector_num,
                                             ide_dma_cb, s);
+        break;
     }
 
     if (!s->bus->dma->aiocb) {
@@ -527,12 +530,12 @@ eot:
    ide_set_inactive(s);
 }
 
-static void ide_sector_start_dma(IDEState *s, int is_read)
+static void ide_sector_start_dma(IDEState *s, enum ide_dma_cmd dma_cmd)
 {
     s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
     s->io_buffer_index = 0;
     s->io_buffer_size = 0;
-    s->is_read = is_read;
+    s->dma_cmd = dma_cmd;
     s->bus->dma->ops->start_dma(s->bus->dma, s, ide_dma_cb);
 }
 
@@ -915,7 +918,7 @@ void ide_exec_cmd(IDEBus *bus, uint32_t
         if (!s->bs)
             goto abort_cmd;
        ide_cmd_lba48_transform(s, lba48);
-        ide_sector_start_dma(s, 1);
+        ide_sector_start_dma(s, IDE_DMA_READ);
         break;
        case WIN_WRITEDMA_EXT:
        lba48 = 1;
@@ -924,7 +927,7 @@ void ide_exec_cmd(IDEBus *bus, uint32_t
         if (!s->bs)
             goto abort_cmd;
        ide_cmd_lba48_transform(s, lba48);
-        ide_sector_start_dma(s, 0);
+        ide_sector_start_dma(s, IDE_DMA_WRITE);
         s->media_changed = 1;
         break;
     case WIN_READ_NATIVE_MAX_EXT:
Index: qemu/hw/ide/internal.h
===================================================================
--- qemu.orig/hw/ide/internal.h 2011-05-03 11:32:13.884007986 +0200
+++ qemu/hw/ide/internal.h      2011-05-03 11:36:05.526086407 +0200
@@ -379,6 +379,14 @@ struct unreported_events {
     bool new_media;
 };
 
+enum ide_dma_cmd {
+    IDE_DMA_READ,
+    IDE_DMA_WRITE,
+};
+
+#define ide_cmd_is_read(s) \
+       ((s)->dma_cmd == IDE_DMA_READ)
+
 /* NOTE: IDEState represents in fact one drive */
 struct IDEState {
     IDEBus *bus;
@@ -446,7 +454,7 @@ struct IDEState {
     uint32_t mdata_size;
     uint8_t *mdata_storage;
     int media_changed;
-    int is_read;
+    enum ide_dma_cmd dma_cmd;
     /* SMART */
     uint8_t smart_enabled;
     uint8_t smart_autosave;
Index: qemu/hw/ide/macio.c
===================================================================
--- qemu.orig/hw/ide/macio.c    2011-05-03 11:32:14.740670013 +0200
+++ qemu/hw/ide/macio.c 2011-05-03 11:35:56.302803041 +0200
@@ -145,12 +145,17 @@ static void pmac_ide_transfer_cb(void *o
     io->addr += io->len;
     io->len = 0;
 
-    if (s->is_read)
+    switch (s->dma_cmd) {
+    case IDE_DMA_READ:
         m->aiocb = dma_bdrv_read(s->bs, &s->sg, sector_num,
                                 pmac_ide_transfer_cb, io);
-    else
+        break;
+    case IDE_DMA_WRITE:
         m->aiocb = dma_bdrv_write(s->bs, &s->sg, sector_num,
                                  pmac_ide_transfer_cb, io);
+        break;
+    }
+
     if (!m->aiocb)
         pmac_ide_transfer_cb(io, -1);
 }
Index: qemu/hw/ide/pci.c
===================================================================
--- qemu.orig/hw/ide/pci.c      2011-05-03 11:32:13.854008149 +0200
+++ qemu/hw/ide/pci.c   2011-05-03 11:32:27.877265512 +0200
@@ -169,7 +169,7 @@ static int bmdma_set_inactive(IDEDMA *dm
     return 0;
 }
 
-static void bmdma_restart_dma(BMDMAState *bm, int is_read)
+static void bmdma_restart_dma(BMDMAState *bm, enum ide_dma_cmd dma_cmd)
 {
     IDEState *s = bmdma_active_if(bm);
 
@@ -177,7 +177,7 @@ static void bmdma_restart_dma(BMDMAState
     s->io_buffer_index = 0;
     s->io_buffer_size = 0;
     s->nsector = bm->nsector;
-    s->is_read = is_read;
+    s->dma_cmd = dma_cmd;
     bm->cur_addr = bm->addr;
     bm->dma_cb = ide_dma_cb;
     bmdma_start_dma(&bm->dma, s, bm->dma_cb);
@@ -195,7 +195,7 @@ static void bmdma_restart_bh(void *opaqu
 
     if (bm->status & BM_STATUS_DMA_RETRY) {
         bm->status &= ~(BM_STATUS_DMA_RETRY | BM_STATUS_RETRY_READ);
-        bmdma_restart_dma(bm, is_read);
+        bmdma_restart_dma(bm, is_read ? IDE_DMA_READ : IDE_DMA_WRITE);
     } else if (bm->status & BM_STATUS_PIO_RETRY) {
         bm->status &= ~(BM_STATUS_PIO_RETRY | BM_STATUS_RETRY_READ);
         if (is_read) {



reply via email to

[Prev in Thread] Current Thread [Next in Thread]