qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 13/27] Start implementing pSeries logical partition


From: David Gibson
Subject: [Qemu-devel] [PATCH 13/27] Start implementing pSeries logical partition machine
Date: Wed, 23 Mar 2011 16:30:33 +1100

This patch adds a "pseries" machine to qemu.  This aims to emulate a
logical partition on an IBM pSeries machine, compliant to the
"PowerPC Architecture Platform Requirements" (PAPR) document.

This initial version is quite limited, it implements a basic machine
and PAPR hypercall emulation.  So far only one hypercall is present -
H_PUT_TERM_CHAR - so that a (write-only) console is available.

Multiple CPUs are permitted, with SMP entry handled kexec() style.

The machine so far more resembles an old POWER4 style "full system
partition" rather than a modern LPAR, in that the guest manages the
page tables directly, rather than via hypercalls.

The machine requires qemu to be configured with --enable-fdt.  The
machine can (so far) only be booted with -kernel - i.e. no partition
firmware is provided.

Signed-off-by: David Gibson <address@hidden>
---
 Makefile.target  |    2 +
 hw/spapr.c       |  317 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/spapr.h       |  257 +++++++++++++++++++++++++++++++++++++++++++
 hw/spapr_hcall.c |   43 ++++++++
 4 files changed, 619 insertions(+), 0 deletions(-)
 create mode 100644 hw/spapr.c
 create mode 100644 hw/spapr.h
 create mode 100644 hw/spapr_hcall.c

diff --git a/Makefile.target b/Makefile.target
index 62b102a..0fc0623 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -231,6 +231,8 @@ obj-ppc-y += ppc_prep.o
 obj-ppc-y += ppc_oldworld.o
 # NewWorld PowerMac
 obj-ppc-y += ppc_newworld.o
+# IBM pSeries (sPAPR)
+obj-ppc-y += spapr.o spapr_hcall.o
 # PowerPC 4xx boards
 obj-ppc-y += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
 obj-ppc-y += ppc440.o ppc440_bamboo.o
diff --git a/hw/spapr.c b/hw/spapr.c
new file mode 100644
index 0000000..3bfb8e9
--- /dev/null
+++ b/hw/spapr.c
@@ -0,0 +1,317 @@
+/*
+ * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
+ *
+ * Copyright (c) 2004-2007 Fabrice Bellard
+ * Copyright (c) 2007 Jocelyn Mayer
+ * Copyright (c) 2010 David Gibson, IBM Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to 
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+#include "sysemu.h"
+#include "qemu-char.h"
+#include "hw.h"
+#include "elf.h"
+
+#include "hw/boards.h"
+#include "hw/ppc.h"
+#include "hw/loader.h"
+
+#include "hw/spapr.h"
+
+#include <libfdt.h>
+
+#define KERNEL_LOAD_ADDR        0x00000000
+#define INITRD_LOAD_ADDR        0x02800000
+#define FDT_MAX_SIZE            0x10000
+
+#define TIMEBASE_FREQ           512000000ULL
+
+#define MAX_CPUS                32
+
+sPAPREnvironment *spapr;
+
+static void *spapr_create_fdt(int *fdt_size, ram_addr_t ramsize,
+                              const char *cpu_model, CPUState *envs[],
+                              sPAPREnvironment *spapr,
+                              target_phys_addr_t initrd_base,
+                              target_phys_addr_t initrd_size,
+                              const char *kernel_cmdline)
+{
+    void *fdt;
+    uint64_t mem_reg_property[] = { 0, cpu_to_be64(ramsize) };
+    uint32_t start_prop = cpu_to_be32(initrd_base);
+    uint32_t end_prop = cpu_to_be32(initrd_base + initrd_size);
+    int i;
+    char *modelname;
+
+#define _FDT(exp) \
+    do { \
+        int ret = (exp);                                           \
+        if (ret < 0) {                                             \
+            hw_error("qemu: error creating device tree: %s: %s\n", \
+                     #exp, fdt_strerror(ret));                     \
+            return NULL;                                           \
+        }                                                          \
+    } while (0)
+
+    fdt = qemu_mallocz(FDT_MAX_SIZE);
+    _FDT((fdt_create(fdt, FDT_MAX_SIZE)));
+
+    _FDT((fdt_finish_reservemap(fdt)));
+
+    /* Root node */
+    _FDT((fdt_begin_node(fdt, "")));
+    _FDT((fdt_property_string(fdt, "device_type", "chrp")));
+    _FDT((fdt_property_string(fdt, "model", "qemu,emulated-pSeries-LPAR")));
+
+    _FDT((fdt_property_cell(fdt, "#address-cells", 0x2)));
+    _FDT((fdt_property_cell(fdt, "#size-cells", 0x2)));
+
+    /* /chosen */
+    _FDT((fdt_begin_node(fdt, "chosen")));
+
+    _FDT((fdt_property_string(fdt, "bootargs", kernel_cmdline)));
+    _FDT((fdt_property(fdt, "linux,initrd-start",
+                       &start_prop, sizeof(start_prop))));
+    _FDT((fdt_property(fdt, "linux,initrd-end",
+                       &end_prop, sizeof(end_prop))));
+
+    _FDT((fdt_end_node(fdt)));
+
+    /* memory node */
+    _FDT((fdt_begin_node(fdt, "address@hidden")));
+
+    _FDT((fdt_property_string(fdt, "device_type", "memory")));
+    _FDT((fdt_property(fdt, "reg",
+                       mem_reg_property, sizeof(mem_reg_property))));
+
+    _FDT((fdt_end_node(fdt)));
+
+    /* cpus */
+    _FDT((fdt_begin_node(fdt, "cpus")));
+
+    _FDT((fdt_property_cell(fdt, "#address-cells", 0x1)));
+    _FDT((fdt_property_cell(fdt, "#size-cells", 0x0)));
+
+    modelname = qemu_strdup(cpu_model);
+
+    for (i = 0; i < strlen(modelname); i++) {
+        modelname[i] = toupper(modelname[i]);
+    }
+
+    for (i = 0; i < smp_cpus; i++) {
+        CPUState *env = envs[i];
+        char *nodename;
+        uint32_t segs[] = {cpu_to_be32(28), cpu_to_be32(40),
+                           0xffffffff, 0xffffffff};
+
+        if (asprintf(&nodename, "address@hidden", modelname, i) < 0) {
+            fprintf(stderr, "Allocation failure\n");
+            exit(1);
+        }
+
+        _FDT((fdt_begin_node(fdt, nodename)));
+
+        free(nodename);
+
+        _FDT((fdt_property_cell(fdt, "reg", i)));
+        _FDT((fdt_property_string(fdt, "device_type", "cpu")));
+
+        _FDT((fdt_property_cell(fdt, "cpu-version", env->spr[SPR_PVR])));
+        _FDT((fdt_property_cell(fdt, "dcache-block-size",
+                                env->dcache_line_size)));
+        _FDT((fdt_property_cell(fdt, "icache-block-size",
+                                env->icache_line_size)));
+        _FDT((fdt_property_cell(fdt, "timebase-frequency", TIMEBASE_FREQ)));
+        /* Hardcode CPU frequency for now.  It's kind of arbitrary on
+         * full emu, for kvm we should copy it from the host */
+        _FDT((fdt_property_cell(fdt, "clock-frequency", 1000000000)));
+        _FDT((fdt_property_cell(fdt, "ibm,slb-size", env->slb_nr)));
+        _FDT((fdt_property_string(fdt, "status", "okay")));
+        _FDT((fdt_property(fdt, "64-bit", NULL, 0)));
+
+        if (envs[i]->mmu_model & POWERPC_MMU_1TSEG) {
+            _FDT((fdt_property(fdt, "ibm,processor-segment-sizes",
+                               segs, sizeof(segs))));
+        }
+
+        _FDT((fdt_end_node(fdt)));
+    }
+
+    qemu_free(modelname);
+
+    _FDT((fdt_end_node(fdt)));
+
+    _FDT((fdt_end_node(fdt))); /* close root node */
+    _FDT((fdt_finish(fdt)));
+
+    if (fdt_size) {
+        *fdt_size = fdt_totalsize(fdt);
+    }
+
+    return fdt;
+}
+
+static uint64_t translate_kernel_address(void *opaque, uint64_t addr)
+{
+    return (addr & 0x0fffffff) + KERNEL_LOAD_ADDR;
+}
+
+static void emulate_spapr_hypercall(CPUState *env)
+{
+    env->gpr[3] = spapr_hypercall(env, env->gpr[3], &env->gpr[4]);
+}
+
+/* FIXME: hack until we implement the proper VIO console */
+static target_ulong h_put_term_char(CPUState *env, sPAPREnvironment *spapr,
+                                    target_ulong opcode, target_ulong *args)
+{
+    uint8_t buf[16];
+
+    stq_p(buf, args[2]);
+    stq_p(buf + 8, args[3]);
+
+    qemu_chr_write(serial_hds[0], buf, args[1]);
+
+    return 0;
+}
+
+
+/* pSeries LPAR / sPAPR hardware init */
+static void ppc_spapr_init(ram_addr_t ram_size,
+                           const char *boot_device,
+                           const char *kernel_filename,
+                           const char *kernel_cmdline,
+                           const char *initrd_filename,
+                           const char *cpu_model)
+{
+    CPUState *envs[MAX_CPUS];
+    void *fdt;
+    int i;
+    ram_addr_t ram_offset;
+    target_phys_addr_t fdt_addr;
+    uint32_t kernel_base, initrd_base;
+    long kernel_size, initrd_size;
+    int fdt_size;
+
+    spapr = qemu_malloc(sizeof(*spapr));
+    cpu_ppc_hypercall = emulate_spapr_hypercall;
+
+    /* We place the device tree just below either the top of RAM, or
+     * 2GB, so that it can be processed with 32-bit code if
+     * necessary */
+    fdt_addr = MIN(ram_size, 0x80000000) - FDT_MAX_SIZE;
+
+    /* init CPUs */
+    if (cpu_model == NULL) {
+        cpu_model = "POWER7";
+    }
+    for (i = 0; i < smp_cpus; i++) {
+        CPUState *env =  cpu_init(cpu_model);
+
+        if (!env) {
+            fprintf(stderr, "Unable to find PowerPC CPU definition\n");
+            exit(1);
+        }
+        /* Set time-base frequency to 512 MHz */
+        cpu_ppc_tb_init(env, TIMEBASE_FREQ);
+        qemu_register_reset((QEMUResetHandler *)&cpu_reset, env);
+
+        env->hreset_vector = 0x60;
+        env->hreset_excp_prefix = 0;
+        env->gpr[3] = i;
+
+        envs[i] = env;
+    }
+
+    /* allocate RAM */
+    ram_offset = qemu_ram_alloc(NULL, "ppc_spapr.ram", ram_size);
+    cpu_register_physical_memory(0, ram_size, ram_offset);
+
+    spapr_register_hypercall(H_PUT_TERM_CHAR, h_put_term_char);
+
+    if (kernel_filename) {
+        uint64_t lowaddr = 0;
+
+        kernel_base = KERNEL_LOAD_ADDR;
+
+        kernel_size = load_elf(kernel_filename, translate_kernel_address, NULL,
+                               NULL, &lowaddr, NULL, 1, ELF_MACHINE, 0);
+        if (kernel_size < 0) {
+            kernel_size = load_image_targphys(kernel_filename, kernel_base,
+                                              ram_size - kernel_base);
+        }
+        if (kernel_size < 0) {
+            hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
+            exit(1);
+        }
+
+        /* load initrd */
+        if (initrd_filename) {
+            initrd_base = INITRD_LOAD_ADDR;
+            initrd_size = load_image_targphys(initrd_filename, initrd_base,
+                                              ram_size - initrd_base);
+            if (initrd_size < 0) {
+                hw_error("qemu: could not load initial ram disk '%s'\n",
+                         initrd_filename);
+                exit(1);
+            }
+        } else {
+            initrd_base = 0;
+            initrd_size = 0;
+        }
+
+    } else {
+        fprintf(stderr, "pSeries machine needs -kernel for now");
+        exit(1);
+    }
+
+    /* Prepare the device tree */
+    fdt = spapr_create_fdt(&fdt_size, ram_size, cpu_model, envs, spapr,
+                           initrd_base, initrd_size, kernel_cmdline);
+    if (!fdt) {
+        hw_error("Couldn't create pSeries device tree\n");
+        exit(1);
+    }
+
+    cpu_physical_memory_write(fdt_addr, fdt, fdt_size);
+
+    qemu_free(fdt);
+
+    envs[0]->gpr[3] = fdt_addr;
+    envs[0]->gpr[5] = 0;
+    envs[0]->hreset_vector = kernel_base;
+}
+
+static QEMUMachine spapr_machine = {
+    .name = "pseries",
+    .desc = "pSeries Logical Partition (PAPR compliant)",
+    .init = ppc_spapr_init,
+    .max_cpus = MAX_CPUS,
+    .no_vga = 1,
+    .no_parallel = 1,
+};
+
+static void spapr_machine_init(void)
+{
+    qemu_register_machine(&spapr_machine);
+}
+
+machine_init(spapr_machine_init);
diff --git a/hw/spapr.h b/hw/spapr.h
new file mode 100644
index 0000000..685944b
--- /dev/null
+++ b/hw/spapr.h
@@ -0,0 +1,257 @@
+#if !defined(__HW_SPAPR_H__)
+#define __HW_SPAPR_H__
+
+typedef struct sPAPREnvironment {
+} sPAPREnvironment;
+
+#define H_SUCCESS         0
+#define H_BUSY            1        /* Hardware busy -- retry later */
+#define H_CLOSED          2        /* Resource closed */
+#define H_NOT_AVAILABLE   3
+#define H_CONSTRAINED     4        /* Resource request constrained to max 
allowed */
+#define H_PARTIAL         5
+#define H_IN_PROGRESS     14       /* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE   16
+#define H_PENDING         17       /* returned from H_POLL_PENDING */
+#define H_CONTINUE        18       /* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE         9900  /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC        9900  /* Long busy, hint that 1msec \
+                                                 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC       9901  /* Long busy, hint that 10msec \
+                                                 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC      9902  /* Long busy, hint that 100msec \
+                                                 is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC         9903  /* Long busy, hint that 1sec \
+                                                 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC        9904  /* Long busy, hint that 10sec \
+                                                 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC       9905  /* Long busy, hint that 100sec \
+                                                 is a good time to retry */
+#define H_LONG_BUSY_END_RANGE           9905  /* End of long busy range */
+#define H_HARDWARE        -1       /* Hardware error */
+#define H_FUNCTION        -2       /* Function not supported */
+#define H_PRIVILEGE       -3       /* Caller not privileged */
+#define H_PARAMETER       -4       /* Parameter invalid, out-of-range or 
conflicting */
+#define H_BAD_MODE        -5       /* Illegal msr value */
+#define H_PTEG_FULL       -6       /* PTEG is full */
+#define H_NOT_FOUND       -7       /* PTE was not found" */
+#define H_RESERVED_DABR   -8       /* DABR address is reserved by the 
hypervisor on this processor" */
+#define H_NO_MEM          -9
+#define H_AUTHORITY       -10
+#define H_PERMISSION      -11
+#define H_DROPPED         -12
+#define H_SOURCE_PARM     -13
+#define H_DEST_PARM       -14
+#define H_REMOTE_PARM     -15
+#define H_RESOURCE        -16
+#define H_ADAPTER_PARM    -17
+#define H_RH_PARM         -18
+#define H_RCQ_PARM        -19
+#define H_SCQ_PARM        -20
+#define H_EQ_PARM         -21
+#define H_RT_PARM         -22
+#define H_ST_PARM         -23
+#define H_SIGT_PARM       -24
+#define H_TOKEN_PARM      -25
+#define H_MLENGTH_PARM    -27
+#define H_MEM_PARM        -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM       -30
+#define H_PORT_PARM       -31
+#define H_MCG_PARM        -32
+#define H_VL_PARM         -33
+#define H_TSIZE_PARM      -34
+#define H_TRACE_PARM      -35
+
+#define H_MASK_PARM       -37
+#define H_MCG_FULL        -38
+#define H_ALIAS_EXIST     -39
+#define H_P_COUNTER       -40
+#define H_TABLE_FULL      -41
+#define H_ALT_TABLE       -42
+#define H_MR_CONDITION    -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE         -45
+#define H_RESCINDEND      -46
+#define H_MULTI_THREADS_ACTIVE -9005
+
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later.  This prevents calls blocking in the
+ * firmware for long periods of time.  Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying.  If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
+                            && (x <= H_LONG_BUSY_END_RANGE))
+
+/* Flags */
+#define H_LARGE_PAGE      (1ULL<<(63-16))
+#define H_EXACT           (1ULL<<(63-24))       /* Use exact PTE or return 
H_PTEG_FULL */
+#define H_R_XLATE         (1ULL<<(63-25))       /* include a valid logical 
page num in the pte if the valid bit is set */
+#define H_READ_4          (1ULL<<(63-26))       /* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE (1ULL<<(63-28))
+#define H_PAGE_UNUSED     ((1ULL<<(63-29)) | (1ULL<<(63-30)))
+#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1ULL<<(63-31)))
+#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
+#define H_AVPN            (1ULL<<(63-32))       /* An avpn is provided as a 
sanity test */
+#define H_ANDCOND         (1ULL<<(63-33))
+#define H_ICACHE_INVALIDATE (1ULL<<(63-40))     /* icbi, etc.  (ignored for IO 
pages) */
+#define H_ICACHE_SYNCHRONIZE (1ULL<<(63-41))    /* dcbst, icbi, etc (ignored 
for IO pages */
+#define H_ZERO_PAGE       (1ULL<<(63-48))       /* zero the page before 
mapping (ignored for IO pages) */
+#define H_COPY_PAGE       (1ULL<<(63-49))
+#define H_N               (1ULL<<(63-61))
+#define H_PP1             (1ULL<<(63-62))
+#define H_PP2             (1ULL<<(63-63))
+
+/* VASI States */
+#define H_VASI_INVALID    0
+#define H_VASI_ENABLED    1
+#define H_VASI_ABORTED    2
+#define H_VASI_SUSPENDING 3
+#define H_VASI_SUSPENDED  4
+#define H_VASI_RESUMED    5
+#define H_VASI_COMPLETED  6
+
+/* DABRX flags */
+#define H_DABRX_HYPERVISOR (1ULL<<(63-61))
+#define H_DABRX_KERNEL     (1ULL<<(63-62))
+#define H_DABRX_USER       (1ULL<<(63-63))
+
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT     4096
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE                0x04
+#define H_ENTER                 0x08
+#define H_READ                  0x0c
+#define H_CLEAR_MOD             0x10
+#define H_CLEAR_REF             0x14
+#define H_PROTECT               0x18
+#define H_GET_TCE               0x1c
+#define H_PUT_TCE               0x20
+#define H_SET_SPRG0             0x24
+#define H_SET_DABR              0x28
+#define H_PAGE_INIT             0x2c
+#define H_SET_ASR               0x30
+#define H_ASR_ON                0x34
+#define H_ASR_OFF               0x38
+#define H_LOGICAL_CI_LOAD       0x3c
+#define H_LOGICAL_CI_STORE      0x40
+#define H_LOGICAL_CACHE_LOAD    0x44
+#define H_LOGICAL_CACHE_STORE   0x48
+#define H_LOGICAL_ICBI          0x4c
+#define H_LOGICAL_DCBF          0x50
+#define H_GET_TERM_CHAR         0x54
+#define H_PUT_TERM_CHAR         0x58
+#define H_REAL_TO_LOGICAL       0x5c
+#define H_HYPERVISOR_DATA       0x60
+#define H_EOI                   0x64
+#define H_CPPR                  0x68
+#define H_IPI                   0x6c
+#define H_IPOLL                 0x70
+#define H_XIRR                  0x74
+#define H_PERFMON               0x7c
+#define H_MIGRATE_DMA           0x78
+#define H_REGISTER_VPA          0xDC
+#define H_CEDE                  0xE0
+#define H_CONFER                0xE4
+#define H_PROD                  0xE8
+#define H_GET_PPP               0xEC
+#define H_SET_PPP               0xF0
+#define H_PURR                  0xF4
+#define H_PIC                   0xF8
+#define H_REG_CRQ               0xFC
+#define H_FREE_CRQ              0x100
+#define H_VIO_SIGNAL            0x104
+#define H_SEND_CRQ              0x108
+#define H_COPY_RDMA             0x110
+#define H_REGISTER_LOGICAL_LAN  0x114
+#define H_FREE_LOGICAL_LAN      0x118
+#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
+#define H_SEND_LOGICAL_LAN      0x120
+#define H_BULK_REMOVE           0x124
+#define H_MULTICAST_CTRL        0x130
+#define H_SET_XDABR             0x134
+#define H_STUFF_TCE             0x138
+#define H_PUT_TCE_INDIRECT      0x13C
+#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_VTERM_PARTNER_INFO    0x150
+#define H_REGISTER_VTERM        0x154
+#define H_FREE_VTERM            0x158
+#define H_RESET_EVENTS          0x15C
+#define H_ALLOC_RESOURCE        0x160
+#define H_FREE_RESOURCE         0x164
+#define H_MODIFY_QP             0x168
+#define H_QUERY_QP              0x16C
+#define H_REREGISTER_PMR        0x170
+#define H_REGISTER_SMR          0x174
+#define H_QUERY_MR              0x178
+#define H_QUERY_MW              0x17C
+#define H_QUERY_HCA             0x180
+#define H_QUERY_PORT            0x184
+#define H_MODIFY_PORT           0x188
+#define H_DEFINE_AQP1           0x18C
+#define H_GET_TRACE_BUFFER      0x190
+#define H_DEFINE_AQP0           0x194
+#define H_RESIZE_MR             0x198
+#define H_ATTACH_MCQP           0x19C
+#define H_DETACH_MCQP           0x1A0
+#define H_CREATE_RPT            0x1A4
+#define H_REMOVE_RPT            0x1A8
+#define H_REGISTER_RPAGES       0x1AC
+#define H_DISABLE_AND_GETC      0x1B0
+#define H_ERROR_DATA            0x1B4
+#define H_GET_HCA_INFO          0x1B8
+#define H_GET_PERF_COUNT        0x1BC
+#define H_MANAGE_TRACE          0x1C0
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
+#define H_QUERY_INT_STATE       0x1E4
+#define H_POLL_PENDING          0x1D8
+#define H_ILLAN_ATTRIBUTES      0x244
+#define H_MODIFY_HEA_QP         0x250
+#define H_QUERY_HEA_QP          0x254
+#define H_QUERY_HEA             0x258
+#define H_QUERY_HEA_PORT        0x25C
+#define H_MODIFY_HEA_PORT       0x260
+#define H_REG_BCMC              0x264
+#define H_DEREG_BCMC            0x268
+#define H_REGISTER_HEA_RPAGES   0x26C
+#define H_DISABLE_AND_GET_HEA   0x270
+#define H_GET_HEA_INFO          0x274
+#define H_ALLOC_HEA_RESOURCE    0x278
+#define H_ADD_CONN              0x284
+#define H_DEL_CONN              0x288
+#define H_JOIN                  0x298
+#define H_VASI_STATE            0x2A4
+#define H_ENABLE_CRQ            0x2B0
+#define H_GET_EM_PARMS          0x2B8
+#define H_SET_MPP               0x2D0
+#define H_GET_MPP               0x2D4
+#define MAX_HCALL_OPCODE        H_GET_MPP
+
+extern sPAPREnvironment *spapr;
+
+/*#define DEBUG_SPAPR_HCALLS*/
+
+#ifdef DEBUG_SPAPR_HCALLS
+#define hcall_dprintf(fmt, ...) \
+    do { fprintf(stderr, fmt, ## __VA_ARGS__); } while (0)
+#else
+#define hcall_dprintf(fmt, ...) \
+    do { } while (0)
+#endif
+
+typedef target_ulong (*spapr_hcall_fn)(CPUState *env, sPAPREnvironment *spapr,
+                                       target_ulong opcode,
+                                       target_ulong *args);
+
+void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn);
+target_ulong spapr_hypercall(CPUState *env, target_ulong opcode,
+                             target_ulong *args);
+
+#endif /* !defined (__HW_SPAPR_H__) */
diff --git a/hw/spapr_hcall.c b/hw/spapr_hcall.c
new file mode 100644
index 0000000..7623969
--- /dev/null
+++ b/hw/spapr_hcall.c
@@ -0,0 +1,43 @@
+#include "sysemu.h"
+#include "cpu.h"
+#include "qemu-char.h"
+#include "hw/spapr.h"
+
+struct hypercall {
+    spapr_hcall_fn fn;
+} hypercall_table[(MAX_HCALL_OPCODE / 4) + 1];
+
+void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn)
+{
+    struct hypercall *hc;
+
+    assert(opcode <= MAX_HCALL_OPCODE);
+    assert((opcode & 0x3) == 0);
+
+    hc = hypercall_table + (opcode / 4);
+
+    assert(!hc->fn || (fn == hc->fn));
+
+    hc->fn = fn;
+}
+
+target_ulong spapr_hypercall(CPUState *env, target_ulong opcode,
+                             target_ulong *args)
+{
+    if (msr_pr) {
+        hcall_dprintf("Hypercall made with MSR[PR]=1\n");
+        return H_PRIVILEGE;
+    }
+
+    if ((opcode <= MAX_HCALL_OPCODE)
+        && ((opcode & 0x3) == 0)) {
+        struct hypercall *hc = hypercall_table + (opcode / 4);
+
+        if (hc->fn) {
+            return hc->fn(env, spapr, opcode, args);
+        }
+    }
+
+    hcall_dprintf("Unimplemented hcall 0x" TARGET_FMT_lx "\n", opcode);
+    return H_FUNCTION;
+}
-- 
1.7.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]