[Qemu-devel] [patch 1/2] document QEMU<->ACPIBIOS PCI hotplug interface

[Marcelo Tosatti]

Document how QEMU communicates with ACPI BIOS for PCI hotplug.

Signed-off-by: Marcelo Tosatti <address@hidden>

Index: qemu/docs/specs/acpi_pci_hotplug.txt
===================================================================
--- /dev/null
+++ qemu/docs/specs/acpi_pci_hotplug.txt
@@ -0,0 +1,39 @@
+QEMU<->ACPI BIOS PCI hotplug interface
+--------------------------------------
+
+QEMU supports PCI hotplug via ACPI, for PCI bus 0. This document
+describes the interface between QEMU and the ACPI BIOS.
+
+ACPI GPE block (IO ports 0xafe0-0xafe3, byte access):
+-----------------------------------------
+
+Generic ACPI GPE block. Bit 1 (GPE.1) used to notify PCI hotplug/eject
+event to ACPI BIOS, via SCI interrupt.
+
+PCI slot injection notification pending (IO port 0xae00-0xae03, 4-byte access):
+---------------------------------------------------------------
+Slot injection notification pending. One bit per slot.
+
+Read by ACPI BIOS GPE.1 handler to notify OS of injection
+events.
+
+PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access):
+-----------------------------------------------------
+Slot removal notification pending. One bit per slot.
+
+Read by ACPI BIOS GPE.1 handler to notify OS of removal
+events.
+
+PCI device eject (IO port 0xae08-0xae0b, 4-byte access):
+----------------------------------------
+
+Used by ACPI BIOS _EJ0 method to request device removal. One bit per slot.
+Reads return 0.
+
+PCI removability status (IO port 0xae0c-0xae0f, 4-byte access):
+-----------------------------------------------
+
+Used by ACPI BIOS _RMV method to indicate removability status to OS. One
+bit per slot.
+
+