[Qemu-devel] Re: [PATCHv4 15/15] Pass boot device list to firmware.

[Gleb Natapov]

On Sun, Nov 14, 2010 at 10:50:13PM +0000, Blue Swirl wrote:
> On Sun, Nov 14, 2010 at 3:39 PM, Gleb Natapov <address@hidden> wrote:
> >
> > Signed-off-by: Gleb Natapov <address@hidden>
> > ---
> >  hw/fw_cfg.c |   14 ++++++++++++++
> >  hw/fw_cfg.h |    4 +++-
> >  sysemu.h    |    1 +
> >  vl.c        |   51 +++++++++++++++++++++++++++++++++++++++++++++++++++
> >  4 files changed, 69 insertions(+), 1 deletions(-)
> >
> > diff --git a/hw/fw_cfg.c b/hw/fw_cfg.c
> > index 7b9434f..f6a67db 100644
> > --- a/hw/fw_cfg.c
> > +++ b/hw/fw_cfg.c
> > @@ -53,6 +53,7 @@ struct FWCfgState {
> >     FWCfgFiles *files;
> >     uint16_t cur_entry;
> >     uint32_t cur_offset;
> > +    Notifier machine_ready;
> >  };
> >
> >  static void fw_cfg_write(FWCfgState *s, uint8_t value)
> > @@ -315,6 +316,15 @@ int fw_cfg_add_file(FWCfgState *s,  const char 
> > *filename, uint8_t *data,
> >     return 1;
> >  }
> >
> > +static void fw_cfg_machine_ready(struct Notifier* n)
> > +{
> > +    uint32_t len;
> > +    char *bootindex = get_boot_devices_list(&len);
> > +
> > +    fw_cfg_add_bytes(container_of(n, FWCfgState, machine_ready),
> > +                     FW_CFG_BOOTINDEX, (uint8_t*)bootindex, len);
> > +}
> > +
> >  FWCfgState *fw_cfg_init(uint32_t ctl_port, uint32_t data_port,
> >                         target_phys_addr_t ctl_addr, target_phys_addr_t 
> > data_addr)
> >  {
> > @@ -343,6 +353,10 @@ FWCfgState *fw_cfg_init(uint32_t ctl_port, uint32_t 
> > data_port,
> >     fw_cfg_add_i16(s, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
> >     fw_cfg_add_i16(s, FW_CFG_BOOT_MENU, (uint16_t)boot_menu);
> >
> > +
> > +    s->machine_ready.notify = fw_cfg_machine_ready;
> > +    qemu_add_machine_init_done_notifier(&s->machine_ready);
> > +
> >     return s;
> >  }
> >
> > diff --git a/hw/fw_cfg.h b/hw/fw_cfg.h
> > index 856bf91..4d61410 100644
> > --- a/hw/fw_cfg.h
> > +++ b/hw/fw_cfg.h
> > @@ -30,7 +30,9 @@
> >
> >  #define FW_CFG_FILE_FIRST       0x20
> >  #define FW_CFG_FILE_SLOTS       0x10
> > -#define FW_CFG_MAX_ENTRY        (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS)
> > +#define FW_CFG_FILE_LAST_SLOT   (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS)
> > +#define FW_CFG_BOOTINDEX        (FW_CFG_FILE_LAST_SLOT + 1)
> > +#define FW_CFG_MAX_ENTRY        FW_CFG_BOOTINDEX
> 
> This should be
> #define FW_CFG_MAX_ENTRY        (FW_CFG_BOOTINDEX + 1)
> because the check is like this:
>     if ((key & FW_CFG_ENTRY_MASK) >= FW_CFG_MAX_ENTRY) {
>         s->cur_entry = FW_CFG_INVALID;
> 
Yeah, will fix.

> With that change, I got the bootindex passed to OpenBIOS:
> OpenBIOS for Sparc64
> Configuration device id QEMU version 1 machine id 0
> kernel cmdline
> CPUs: 1 x SUNW,UltraSPARC-IIi
> UUID: 00000000-0000-0000-0000-000000000000
> bootindex num_strings 1
> bootindex /address@hidden/address@hidden/address@hidden/address@hidden
> 
> The device path does not match exactly, but it's close:
> /address@hidden,0/address@hidden/address@hidden/address@hidden

pbm->pci should be solvable by the patch at the end. Were in the spec
it is allowed to abbreviate 1fe00000000 as 1fe,0? Spec allows to drop
starting zeroes but TARGET_FMT_plx definition in targphys.h has 0 after
%. I can define another one without leading zeroes. Can you suggest
a name?  TARGET_FMT_lx is poisoned. As of ATA there is no open firmware
binding spec for ATA, so everyone does what he pleases. I based my
implementation on what open firmware showing when running on qemu x86.
"pci-ata" should be "ide" according to PCI binding spec :) 

diff --git a/hw/apb_pci.c b/hw/apb_pci.c
index c619112..643aa49 100644
--- a/hw/apb_pci.c
+++ b/hw/apb_pci.c
@@ -453,6 +453,7 @@ static PCIDeviceInfo pbm_pci_host_info = {
 
 static SysBusDeviceInfo pbm_host_info = {
     .qdev.name = "pbm",
+    .qdev.fw_name = "pci",
     .qdev.size = sizeof(APBState),
     .qdev.reset = pci_pbm_reset,
     .init = pci_pbm_init_device,
--
                        Gleb.