[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v5 04/14] pci/bridge: fix pci_bridge_reset()
From: |
Isaku Yamahata |
Subject: |
[Qemu-devel] [PATCH v5 04/14] pci/bridge: fix pci_bridge_reset() |
Date: |
Tue, 19 Oct 2010 18:06:31 +0900 |
The default value of base/limit registers aren't specified in the spec.
So pci_bridge_reset() shouldn't touch them.
Instead, introduced two functions to reset those registers in a way
of typical implementation. zero base/limit registers or disable forwarding.
They will be used later.
Signed-off-by: Isaku Yamahata <address@hidden>
---
Changes v4 -> v5:
- drop the lines in pci_bridge_reset()
- introduced two functions to reset base/limit registers.
---
hw/pci_bridge.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++-------
hw/pci_bridge.h | 2 +
2 files changed, 51 insertions(+), 8 deletions(-)
diff --git a/hw/pci_bridge.c b/hw/pci_bridge.c
index 638e3b3..de75e6a 100644
--- a/hw/pci_bridge.c
+++ b/hw/pci_bridge.c
@@ -151,6 +151,46 @@ void pci_bridge_write_config(PCIDevice *d,
}
}
+void pci_bridge_reset_zero_base_limit(PCIDevice *dev)
+{
+ uint8_t *conf = dev->config;
+
+ pci_byte_test_and_clear_mask(conf + PCI_IO_BASE,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_word_test_and_clear_mask(conf + PCI_MEMORY_BASE,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_BASE,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
+ pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
+}
+
+void pci_bridge_reset_disable_base_limit(PCIDevice *dev)
+{
+ uint8_t *conf = dev->config;
+
+ pci_byte_test_and_set_mask(conf + PCI_IO_BASE,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_byte_test_and_clear_mask(conf + PCI_IO_LIMIT,
+ PCI_IO_RANGE_MASK & 0xff);
+ pci_word_test_and_set_mask(conf + PCI_MEMORY_BASE,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_MEMORY_LIMIT,
+ PCI_MEMORY_RANGE_MASK & 0xffff);
+ pci_word_test_and_set_mask(conf + PCI_PREF_MEMORY_BASE,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
+ PCI_PREF_RANGE_MASK & 0xffff);
+ pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
+ pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
+}
+
/* reset bridge specific configuration registers */
void pci_bridge_reset_reg(PCIDevice *dev)
{
@@ -161,14 +201,15 @@ void pci_bridge_reset_reg(PCIDevice *dev)
conf[PCI_SUBORDINATE_BUS] = 0;
conf[PCI_SEC_LATENCY_TIMER] = 0;
- conf[PCI_IO_BASE] = 0;
- conf[PCI_IO_LIMIT] = 0;
- pci_set_word(conf + PCI_MEMORY_BASE, 0);
- pci_set_word(conf + PCI_MEMORY_LIMIT, 0);
- pci_set_word(conf + PCI_PREF_MEMORY_BASE, 0);
- pci_set_word(conf + PCI_PREF_MEMORY_LIMIT, 0);
- pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
- pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
+ /*
+ * the default values for base/limit registers aren't specified
+ * in the PCI-to-PCI-bridge spec. So we don't thouch them here.
+ * Each implementation can override it.
+ * typical implementation does
+ * - zero registers: pci_bridge_reset_zer_base_limit()
+ * or
+ * - disable forwarding: pci_bridge_reset_disable_base_limit()
+ */
pci_set_word(conf + PCI_BRIDGE_CONTROL, 0);
}
diff --git a/hw/pci_bridge.h b/hw/pci_bridge.h
index f6fade0..2359684 100644
--- a/hw/pci_bridge.h
+++ b/hw/pci_bridge.h
@@ -39,6 +39,8 @@ pcibus_t pci_bridge_get_limit(const PCIDevice *bridge,
uint8_t type);
void pci_bridge_write_config(PCIDevice *d,
uint32_t address, uint32_t val, int len);
+void pci_bridge_reset_zero_base_limit(PCIDevice *dev);
+void pci_bridge_reset_disable_base_limit(PCIDevice *dev);
void pci_bridge_reset_reg(PCIDevice *dev);
void pci_bridge_reset(DeviceState *qdev);
--
1.7.1.1
- [Qemu-devel] [PATCH v5 00/14] pcie port switch emulators, Isaku Yamahata, 2010/10/19
- [Qemu-devel] [PATCH v5 04/14] pci/bridge: fix pci_bridge_reset(),
Isaku Yamahata <=
- [Qemu-devel] [PATCH v5 13/14] pcie/hotplug: introduce pushing attention button command, Isaku Yamahata, 2010/10/19
- [Qemu-devel] [PATCH v5 03/14] pci: use pci_word_test_and_clear_mask() in pci_device_reset(), Isaku Yamahata, 2010/10/19
- [Qemu-devel] [PATCH v5 02/14] pci: introduce helper function to handle msi-x and msi., Isaku Yamahata, 2010/10/19
- [Qemu-devel] [PATCH v5 14/14] pcie/aer: glue aer error injection into qemu monitor, Isaku Yamahata, 2010/10/19
- [Qemu-devel] [PATCH v5 01/14] pci: introduce helper functions to test-and-{clear, set} mask in configuration space, Isaku Yamahata, 2010/10/19
- [Qemu-devel] [PATCH v5 06/14] pcie: add pcie constants to pcie_regs.h, Isaku Yamahata, 2010/10/19
- [Qemu-devel] [PATCH v5 12/14] x3130: pcie downstream port, Isaku Yamahata, 2010/10/19
- [Qemu-devel] [PATCH v5 07/14] pcie: helper functions for pcie capability and extended capability, Isaku Yamahata, 2010/10/19