[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapabl
From: |
Michael S. Tsirkin |
Subject: |
[Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable |
Date: |
Sun, 3 Jan 2010 19:44:30 +0200 |
User-agent: |
Mutt/1.5.19 (2009-01-05) |
On Sun, Jan 03, 2010 at 06:40:52PM +0100, Alexander Graf wrote:
>
> On 03.01.2010, at 18:29, Michael S. Tsirkin wrote:
>
> > On Sun, Jan 03, 2010 at 05:09:32PM +0100, Alexander Graf wrote:
> >>
> >> On 03.01.2010, at 16:45, Michael S. Tsirkin wrote:
> >>
> >>> On Sun, Jan 03, 2010 at 02:50:45AM +0100, Alexander Graf wrote:
> >>>> Different host buses may have different layouts for config space
> >>>> accessors.
> >>>>
> >>>> The Mac U3 for example uses the following define to access Type 0
> >>>> (directly
> >>>> attached) devices:
> >>>>
> >>>> #define MACRISC_CFA0(devfn, off) \
> >>>> ((1 << (unsigned int)PCI_SLOT(dev_fn)) \
> >>>> | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \
> >>>> | (((unsigned int)(off)) & 0xFCUL))
> >>>>
> >>>> Obviously, this is different from the encoding we interpret in qemu. In
> >>>> order to let host controllers take some influence there, we can just
> >>>> introduce a converter function that takes whatever accessor we have and
> >>>> makes a qemu understandable one out of it.
> >>>>
> >>>> This patch is the groundwork for Uninorth PCI config space fixes.
> >>>>
> >>>> Signed-off-by: Alexander Graf <address@hidden>
> >>>> CC: Michael S. Tsirkin <address@hidden>
> >>>
> >>> Thanks!
> >>>
> >>> It always bothered me that the code in pci_host uses x86 encoding and
> >>> other architectures are converted to x86. As long as we are adding
> >>> redirection, maybe we should get rid of this, and make get_config_reg
> >>> return register and devfn separately, so we don't need to encode/decode
> >>> back and forth?
> >>
> >> Hmm, when touching code I'm not 100% sure what I'm doing I usually try to
> >> build on stuff that is there already. That's exactly what happened here.
> >>
> >> I'm personally not against defining the x86 format as qemu default. That
> >> way everyone knows what to deal with. I'm not sure if PCI defines anything
> >> that couldn't be represented by the x86 encoding in 32 bits. I actually
> >> doubt it. So it seems like a pretty good fit, especially given that all
> >> the other code is already in place.
> >>
> >>> OTOH if we are after a quick fix, won't it be simpler to have
> >>> unin_pci simply use its own routines instead of
> >>> pci_host_conf_register_mmio
> >>> etc?
> >>
> >> Hm, I figured this is less work :-).
> >
> > Let me explain the idea: we have:
> >
> > static void pci_host_config_writel_ioport(void *opaque,
> > uint32_t addr, uint32_t val)
> > {
> > PCIHostState *s = opaque;
> >
> > PCI_DPRINTF("%s addr %"PRIx32 " val %"PRIx32"\n", __func__, addr,
> > val);
> > s->config_reg = val;
> > }
> >
> > static uint32_t pci_host_config_readl_ioport(void *opaque, uint32_t
> > addr)
> > {
> > PCIHostState *s = opaque;
> > uint32_t val = s->config_reg;
> >
> > PCI_DPRINTF("%s addr %"PRIx32" val %"PRIx32"\n", __func__, addr,
> > val);
> > return val;
> > }
> >
> > void pci_host_conf_register_ioport(pio_addr_t ioport, PCIHostState *s)
> > {
> > register_ioport_write(ioport, 4, 4, pci_host_config_writel_ioport,
> > s);
> > register_ioport_read(ioport, 4, 4, pci_host_config_readl_ioport, s);
> > }
> >
> > If instead of a simple config_reg = val we translate to pc format
> > here, the rest will work. No?
>
> Well, that'd mean I'd have to implement a config_reg read function and do the
> conversion backwards again there. Or I could just save it off in the unin
> state ... hmm ...
Right.
> Either way, let's better get this done right. I'd rather want to have a
> proper framework in place in case someone else stumbles across something
> similar.
>
> Alex
There's already ugliness with swap/noswap versions in there. Anything
that claims to be a proper framework would need to address that as well
IMO.
--
MST
[Qemu-devel] [PATCH 4/6] Include dump of lspci -nn on real G5, Alexander Graf, 2010/01/02
[Qemu-devel] [PATCH 6/6] Enable secondary cmd64x, Alexander Graf, 2010/01/02
[Qemu-devel] [PATCH 1/6] Make config space accessor host bus trapable, Alexander Graf, 2010/01/02
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Michael S. Tsirkin, 2010/01/03
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Alexander Graf, 2010/01/03
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Michael S. Tsirkin, 2010/01/03
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Alexander Graf, 2010/01/03
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable,
Michael S. Tsirkin <=
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Alexander Graf, 2010/01/03
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Michael S. Tsirkin, 2010/01/03
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Blue Swirl, 2010/01/03
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Blue Swirl, 2010/01/10
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Blue Swirl, 2010/01/11
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Igor Kovalenko, 2010/01/11
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Blue Swirl, 2010/01/12
- [Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Blue Swirl, 2010/01/18
[Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Alexander Graf, 2010/01/03
[Qemu-devel] Re: [PATCH 1/6] Make config space accessor host bus trapable, Benjamin Herrenschmidt, 2010/01/03