qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] Re: [PATCH 3/5] Use the correct mask to size the PCI option


From: Michael S. Tsirkin
Subject: [Qemu-devel] Re: [PATCH 3/5] Use the correct mask to size the PCI option ROM BAR.
Date: Mon, 12 Oct 2009 13:03:36 +0200
User-agent: Mutt/1.5.19 (2009-01-05)

On Mon, Oct 12, 2009 at 12:08:21PM +0200, Gleb Natapov wrote:
> On Mon, Oct 12, 2009 at 11:52:25AM +0200, Michael S. Tsirkin wrote:
> > On Mon, Oct 12, 2009 at 08:50:24AM +0200, Gleb Natapov wrote:
> > > Send patch with your favorite interpretation to qemu pcbios/seabios.
> > > The regression concern from my previous mail applicable here as well.
> > 
> > Okay. Can you ack the following?
> > 
> I can if you'll add PCI spec reference for me to double check.


> Also I prefer strict spec reading :)

OK, the issue is that reserved bits in BARs are not
defined as read-only.  So here's a strict one:
can you ack?

--->

seabios: fix ROM and I/O sizing

For ROM BARs, bit 0 is writeable (enable bit), which we not
only don't want to set, but it will stick and make us think
it's an I/O port resource.
Further, PCI spec defines the following bits as reserved:
- bit 1 in I/O BAR
- bits 10:1 in ROM BAR
and we should be careful and write 0 there.
For memory, bits 0-3 are reserved, so it's safe to handle it
in the same way as I/O.

See 6.2.5.1 for I/O and memory, and 6.2.5.2 for ROM;
pages 225 and 228 in PCI spec revision 3.0.

See also Qemu pcbios commit 6ddb9f5c742b2b82b1755d7ec2a127f6e20e3806

Signed-off-by: Michael S. Tsirkin <address@hidden>
---
 src/pciinit.c |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/src/pciinit.c b/src/pciinit.c
index 1d0f784..29b3901 100644
--- a/src/pciinit.c
+++ b/src/pciinit.c
@@ -139,11 +139,13 @@ static void pci_bios_init_device(u16 bdf)
             int ofs;
             u32 val, size;
 
-            if (i == PCI_ROM_SLOT)
+            if (i == PCI_ROM_SLOT) {
                 ofs = PCI_ROM_ADDRESS;
-            else
+                pci_config_writel(bdf, ofs, PCI_ROM_ADDRESS_MASK);
+            } else {
                 ofs = PCI_BASE_ADDRESS_0 + i * 4;
-            pci_config_writel(bdf, ofs, 0xffffffff);
+                pci_config_writel(bdf, ofs, PCI_BASE_ADDRESS_IO_MASK);
+            }
             val = pci_config_readl(bdf, ofs);
             if (val != 0) {
                 size = (~(val & ~0xf)) + 1;
-- 
1.6.3.3







reply via email to

[Prev in Thread] Current Thread [Next in Thread]