Re: [Qemu-devel] [PATCH 00/61] Q35 chip set and stuff.

[Aurelien Jarno]

Isaku Yamahata a écrit :
> This patch set is for Q35 chipset(GMCH and ICH9) based PC.

Nice work?

Do you also plan to implement the GMA (integrated graphic card), and the
IOMMU with this chipset? If not it may be better to call it P35.


> Anthony,
> I'm aware that this patch set is already conflicting to other's patches.
> Which tree/changeset do you want me to rebase?
> Your staging qemu repo doesn't seem to include the latest patches.
> As I'm seeing regular patch conflicts, I need your help as a maintainer.
> 
> The motivation is to support newer hardware features because
> piix chipset is very old.
> Especially I have PCI express in mind and this is the basic
> infrastructure for PCI express hot plug and PCI express native 
> direct attach.
> With this patch set, you can see PCIe MMCONFIG space and 3+ PCI busses.
> I haven't implemented PCI express port/switch and PCI express hot plug.
> This is my next TODO. and then PCI express native direct attach/passthrough
> 
> I can boot Linux 2.6.30 with PCIe MMCONFIG with APIC mode pci interrupt
> routing. I haven't tested other OSes.
> (I patches linux kernel to test MMCONFIG because Linux uses conventional
> IO port to PCI config space, i.e. 256)
> To use this patch, bios also needs patches I'll sent out soon.
> 
> 
> Firstly this patch set splits up current piix pc code into
> piix specific code and common code.
> Those patches are almost same as the one I sent out before.
> And then PCI related patches comes in. They cleans up PCI related code
> , implements PCIe MMCONFIG and fixes PCI bridge.
> Thirdly q35 chipset is implemented.
> Lastly IO apic related 
> 
> Changes from split out piix specific part from pc emulator. V6
> - rebased to 731c54f86988d3f28268f184fabfe9b2a32fb5d3
> - PCIe MMCONFIG
> - pci bridge related fixes
> - chipset emulator works.
> - IOAPIC patches
> 
> Changes from v5:
> - rebased 0.11.0-rc0
> - changed qemu_system_powerdown_register() to call
>   qemu_system_shutdown_request() if qemu_system_shutdown() is called before
>   registering.
> 
> Changes from v4:
> - fix version number.
> - rebased anthony's staging tree whose latest change set is
>   62969268f876c547ee64da6d60e0f363e0f1df75
> 
> Changes from v3:
> - move qemu_system_powerdown() in vl.c and more generic
>   following the comment by Marcelo Tosatti <address@hidden>
>   acpi.c: make qemu_system_powerdown() piix independent.
> - define cmos_set_s3_resume_init() and cmos_set_s3_resume() in pc.c
>   even if TARGET_I386 isn't defined following th ecommit by
>   Paolo Bonzini <address@hidden>
>   pc.c: remove a global variable, RTCState *rtc_state.
> - minor compilation fixes
> 
> Changes from v2:
> - clean up pc_pci_device_init() not to use unnecessary braces.
> 
> Changes from v1:
> - make patches full bisectable
> - typo s/allocte/allocate/
> - some minor fixes
> - dropped a merged patch
> 
> 
> Isaku Yamahata (61):
>   acpi: split out pc smbus routines from acpi.c into pc_smbus.c
>   acpi: split out apm register emulation from acpi.c
>   acpi: add acpi constants from linux header files and use them.
>   acpi: split acpi.c into the common part and the piix4 part.
>   acpi_piix4: remove unused variable in get_pmsts().
>   pc: fix file stream leak in multiboot loader.
>   pc, i440fx: Make smm enable/disable function i440fx independent.
>   pc: make an unnecessary global variable, pit, local.
>   pc: remove a global variable, floppy_controller.
>   pc: remove a global variable, RTCState *rtc_state.
>   pc: introduce a function to allocate cpu irq.
>   pc: make pc_init1() not refer ferr_irq directly.
>   pc: split out cpu initialization from pc_init1() into pc_cpus_init().
>   pc: split out memory allocation from pc_init1() into pc_memory_init()
>   pc: split out vga initialization from pc_init1() into pc_vga_init().
>   pc: split out basic device init from pc_init1() into
>     pc_basic_device_init()
>   pc: split out pci device init from pc_init1() into
>     pc_pci_device_init()
>   pc: split out piix specific part from pc.c into pc_piix.c
>   pc_piix: initialize ioapic before use.
>   pci: fix PCI_DPRINTF() wrt variadic macro.
>   pci: introduce constant PCI_NUM_PINS for the number of interrupt
>     pins, 4.
>   pci: use appropriate PRIs in PCI_DPRINTF().
>   pci: use PCI_SLOT() and PCI_FUNC().
>   pci: define a constant to represent a unmapped bar and use it.
>   pci: use uint64_t for bar addr and size instead of uint32_t.
>   pci: 64bit bar support.
>   pci: clean up of pci_update_mappings()
>   pci: factor out while(bus) bus->next loop logic into
>     pci_find_bus_from().
>   pci: factor out the logic to get pci device from address.
>   pci_host.h: split non-inline static function in pci_host.h into
>     pci_host_c.h
>   pci: pcie host and mmcfg support.
>   pci: helper functions to access PCIDevice::config
>   pci: use the symbolic constant, PCI_ROM_ADDRESS_ENABLE instead of 1.
>   pci: introduce pci_swizzle_map_irq_fn() for interrupt pin swizzle.
>   piix_pci: use pci_swizzle_map_irq_fn().
>   pci: use QLIST_ macro instead of direct list manipulation.
>   pci: add helper function for pci config write function to check
>     address.
>   pci: fix pci_default_write_config()
>   pci: factor out config update logic.
>   pci: use qdev to get parent bus with PCIBus.
>   pci: make bar update function aware of pci bridge.
>   pci/brdige: qdevfy and initialize secondary bus and subordinate bus.
>   pci: add helper function to initialize wmask.
>   pci: initialize wmask according to pci header type.
>   pci/monitor: print out bridge's filtering values and so on.
>   pci/bridge: implement intel 82801ba bridge.
>   pci.h: add more status constats.
>   pci id: add subclass codes for serial device.
>   pci hot add: pass opaque argument to callback.
>   pci hotadd, acpi_piix4: remove global variables.
>   vmstate: add a macro for pointer to struct, VMSTATE_STRUCT_POINTER.
>   pci: add a hook to replace default pci bus instead of 0 bus.
>   pc q35 based chipset emulator
>   pci: add opaque argument to pci_map_irq_fn().
>   ioapic: make ioapic_set_irq() static.
>   ioapic: clean up of  #ifdef DEBUG_IOAPIC.
>   ioapic: add callback when entry is set or ioapic is reset
>   ioapic: make the number of pins configurable.
>   ioapic: make irr accept more than 32 pins.
>   pci: add opaque arg to pci_map_irq_fn.
>   pc_q35: apic mode for pci interrupt routing.
> 
>  Makefile.target                 |    5 +-
>  hw/ac97.c                       |    2 +-
>  hw/acpi.c                       |  736 +--------------------------
>  hw/acpi.h                       |   78 +++
>  hw/acpi_ich9.c                  |  565 ++++++++++++++++++++
>  hw/acpi_ich9.h                  |   57 ++
>  hw/acpi_piix4.c                 |  582 +++++++++++++++++++++
>  hw/apb_pci.c                    |   16 +-
>  hw/cirrus_vga.c                 |    8 +-
>  hw/e1000.c                      |   12 +-
>  hw/eepro100.c                   |   10 +-
>  hw/es1370.c                     |    2 +-
>  hw/grackle_pci.c                |    4 +-
>  hw/gt64xxx.c                    |    4 +-
>  hw/hw.h                         |   42 ++
>  hw/ide/pci.c                    |    4 +-
>  hw/ioapic.c                     |  137 ++++--
>  hw/lsi53c895a.c                 |    6 +-
>  hw/macio.c                      |    2 +-
>  hw/msix.c                       |    2 +-
>  hw/msix.h                       |    2 +-
>  hw/ne2000.c                     |    2 +-
>  hw/openpic.c                    |    2 +-
>  hw/pc.c                         |  344 ++++---------
>  hw/pc.h                         |   48 ++-
>  hw/pc_apm.c                     |   89 ++++
>  hw/pc_apm.h                     |   43 ++
>  hw/pc_piix.c                    |  241 +++++++++
>  hw/pc_q35.c                     |  220 ++++++++
>  hw/pc_smbus.c                   |  178 +++++++
>  hw/pc_smbus.h                   |   43 ++
>  hw/pci-hotplug.c                |    7 +-
>  hw/pci.c                        | 1102 
> +++++++++++++++++++++++++++++++--------
>  hw/pci.h                        |  261 +++++++++-
>  hw/pci_bridge.c                 |   63 +++
>  hw/pci_bridge.h                 |   38 ++
>  hw/pci_host.h                   |  110 +---
>  hw/{pci_host.h => pci_host_c.h} |    8 +-
>  hw/pci_ids.h                    |   28 +
>  hw/pcnet.c                      |    9 +-
>  hw/piix_pci.c                   |   14 +-
>  hw/ppc4xx_pci.c                 |    4 +-
>  hw/ppce500_pci.c                |    4 +-
>  hw/prep_pci.c                   |    4 +-
>  hw/q35.c                        |  784 ++++++++++++++++++++++++++++
>  hw/q35.h                        |  232 ++++++++
>  hw/q35_smbus.c                  |  150 ++++++
>  hw/r2d.c                        |    2 +-
>  hw/rtl8139.c                    |    4 +-
>  hw/sun4u.c                      |    2 +-
>  hw/unin_pci.c                   |    4 +-
>  hw/usb-ohci.c                   |    2 +-
>  hw/usb-uhci.c                   |    2 +-
>  hw/versatile_pci.c              |    2 +-
>  hw/vga-pci.c                    |    2 +-
>  hw/virtio-pci.c                 |    2 +-
>  hw/vmware_vga.c                 |    4 +-
>  hw/wdt_i6300esb.c               |    5 +-
>  sysemu.h                        |    4 +-
>  59 files changed, 4932 insertions(+), 1407 deletions(-)
>  create mode 100644 hw/acpi.h
>  create mode 100644 hw/acpi_ich9.c
>  create mode 100644 hw/acpi_ich9.h
>  create mode 100644 hw/acpi_piix4.c
>  create mode 100644 hw/pc_apm.c
>  create mode 100644 hw/pc_apm.h
>  create mode 100644 hw/pc_piix.c
>  create mode 100644 hw/pc_q35.c
>  create mode 100644 hw/pc_smbus.c
>  create mode 100644 hw/pc_smbus.h
>  create mode 100644 hw/pci_bridge.c
>  create mode 100644 hw/pci_bridge.h
>  copy hw/{pci_host.h => pci_host_c.h} (96%)
>  create mode 100644 hw/q35.c
>  create mode 100644 hw/q35.h
>  create mode 100644 hw/q35_smbus.c
> 
> 
> 
> 


-- 
Aurelien Jarno                          GPG: 1024D/F1BCDB73
address@hidden                 http://www.aurel32.net