[Qemu-devel] esp (sparc32) Extra scsi data.

[Artyom Tarasenko]

got past scsi-controller initialization. Next stop is disks probing:

ok probe-scsi
Extra scsi data. Fatal error.Extra scsi data. Fatal error.
ok

Is it a known problem? The esp log (qemu started with -hda netbsd.img
-cdrom cd.iso):

ok probe-scsi
ESP: write reg[3]: 0x03 -> 0x02
ESP: Chip reset (02)
ESP: write reg[3]: 0x02 -> 0x00
ESP: NOP (00)
ESP: write reg[5]: 0x00 -> 0x93
ESP: write reg[7]: 0x00 -> 0x00
ESP: write reg[9]: 0x00 -> 0x00
ESP: write reg[8]: 0x00 -> 0x07
ESP: read reg[5]: 0x00
ESP: write reg[3]: 0x00 -> 0x03
ESP: Bus reset (03)
ESP: read reg[5]: 0x80
ESP: read reg[5]: 0x00
ESP: read reg[5]: 0x00
ESP: write reg[1]: 0x00 -> 0x00
ESP: write reg[0]: 0x00 -> 0x06
ESP: write reg[4]: 0x00 -> 0x00
ESP: write reg[3]: 0x03 -> 0xc1
ESP: Select without ATN (c1)
ESP: get_cmd: len 6 target 0
ESP: do_cmd: busid 0x0
ESP: SCSI Command complete
ESP: read reg[5]: 0x18
ESP: read reg[4]: 0x03
ESP: write reg[3]: 0xc1 -> 0x00
ESP: NOP (00)
ESP: read reg[6]: 0x04
ESP: write reg[3]: 0x00 -> 0x11
ESP: Initiator Command Complete Sequence (11)
ESP: Transfer status (sense=0)
ESP: read reg[5]: 0x08
ESP: read reg[4]: 0x07
ESP: read reg[7]: 0x02
ESP: read reg[7]: 0x02
ESP: read reg[2]: 0x00
ESP: read reg[7]: 0x02
ESP: read reg[7]: 0x02
ESP: read reg[2]: 0x00
ESP: write reg[3]: 0x11 -> 0x12
ESP: Message Accepted (12)
ESP: Transfer status (sense=0)
ESP: read reg[5]: 0x20
ESP: read reg[4]: 0x07
ESP: read reg[7]: 0x02
Extra scsi data. Fatal error.ESP: read reg[5]: 0x00
ESP: write reg[1]: 0x00 -> 0x00
ESP: write reg[0]: 0x06 -> 0x06
ESP: write reg[4]: 0x00 -> 0x01
ESP: write reg[3]: 0x12 -> 0xc1
ESP: Select without ATN (c1)
ESP: get_cmd: len 6 target 1
ESP: read reg[5]: 0x20
ESP: read reg[4]: 0x00
ESP: read reg[5]: 0x00
ESP: write reg[1]: 0x00 -> 0x00
ESP: write reg[0]: 0x06 -> 0x06
ESP: write reg[4]: 0x01 -> 0x02
ESP: write reg[3]: 0xc1 -> 0xc1
ESP: Select without ATN (c1)
ESP: get_cmd: len 6 target 2
ESP: do_cmd: busid 0x0
ESP: SCSI Command complete
ESP: read reg[5]: 0x18
ESP: read reg[4]: 0x03
ESP: write reg[3]: 0xc1 -> 0x00
ESP: NOP (00)
ESP: read reg[6]: 0x04
ESP: write reg[3]: 0x00 -> 0x11
ESP: Initiator Command Complete Sequence (11)
ESP: Transfer status (sense=0)
ESP: read reg[5]: 0x08
ESP: read reg[4]: 0x07
ESP: read reg[7]: 0x02
ESP: read reg[7]: 0x02
ESP: read reg[2]: 0x00
ESP: read reg[7]: 0x02
ESP: read reg[7]: 0x02
ESP: read reg[2]: 0x00
ESP: write reg[3]: 0x11 -> 0x12
ESP: Message Accepted (12)
ESP: Transfer status (sense=0)
ESP: read reg[5]: 0x20
ESP: read reg[4]: 0x07
ESP: read reg[7]: 0x02
Extra scsi data. Fatal error.ESP: read reg[5]: 0x00
ESP: write reg[1]: 0x00 -> 0x00
ESP: write reg[0]: 0x06 -> 0x06
ESP: write reg[4]: 0x02 -> 0x03
ESP: write reg[3]: 0x12 -> 0xc1
ESP: Select without ATN (c1)
ESP: get_cmd: len 6 target 3
ESP: read reg[5]: 0x20
ESP: read reg[4]: 0x00
ESP: read reg[5]: 0x00
ESP: write reg[1]: 0x00 -> 0x00
ESP: write reg[0]: 0x06 -> 0x06
ESP: write reg[4]: 0x03 -> 0x04
ESP: write reg[3]: 0xc1 -> 0xc1
ESP: Select without ATN (c1)
ESP: get_cmd: len 6 target 4

[skipped targets 4-6, no errors here, just like target 3]

ESP: Select without ATN (c1)
ESP: get_cmd: len 6 target 7
ESP: read reg[5]: 0x20
ESP: read reg[4]: 0x00

ok