[Qemu-devel] [7031] mc146818: add square wave output support

[Aurelien Jarno]

Revision: 7031
          http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=7031
Author:   aurel32
Date:     2009-04-07 22:28:50 +0000 (Tue, 07 Apr 2009)
Log Message:
-----------
mc146818: add square wave output support

This is necessary for es40 as the sqw output is directly connected to the
core chipset.

Signed-off-by: Tristan Gingold <address@hidden>
Signed-off-by: Aurelien Jarno <address@hidden>

Modified Paths:
--------------
    trunk/hw/mc146818rtc.c
    trunk/hw/pc.h

Modified: trunk/hw/mc146818rtc.c
===================================================================
--- trunk/hw/mc146818rtc.c      2009-04-07 22:03:44 UTC (rev 7030)
+++ trunk/hw/mc146818rtc.c      2009-04-07 22:28:50 UTC (rev 7031)
@@ -50,11 +50,12 @@
 
 #define REG_A_UIP 0x80
 
-#define REG_B_SET 0x80
-#define REG_B_PIE 0x40
-#define REG_B_AIE 0x20
-#define REG_B_UIE 0x10
-#define REG_B_DM  0x04
+#define REG_B_SET  0x80
+#define REG_B_PIE  0x40
+#define REG_B_AIE  0x20
+#define REG_B_UIE  0x10
+#define REG_B_SQWE 0x08
+#define REG_B_DM   0x04
 
 struct RTCState {
     uint8_t cmos_data[128];
@@ -62,6 +63,7 @@
     struct tm current_tm;
     int base_year;
     qemu_irq irq;
+    qemu_irq sqw_irq;
     int it_shift;
     /* periodic timer */
     QEMUTimer *periodic_timer;
@@ -95,16 +97,20 @@
 {
     int period_code, period;
     int64_t cur_clock, next_irq_clock;
+    int enable_pie;
 
     period_code = s->cmos_data[RTC_REG_A] & 0x0f;
 #if defined TARGET_I386 || defined TARGET_X86_64
     /* disable periodic timer if hpet is in legacy mode, since interrupts are
      * disabled anyway.
      */
-    if (period_code != 0 && (s->cmos_data[RTC_REG_B] & REG_B_PIE) && 
!hpet_in_legacy_mode()) {
+    enable_pie = hpet_in_legacy_mode();
 #else
-    if (period_code != 0 && (s->cmos_data[RTC_REG_B] & REG_B_PIE)) {
+    enable_pie = 1;
 #endif
+    if (period_code != 0
+        && (((s->cmos_data[RTC_REG_B] & REG_B_PIE) && enable_pie)
+            || ((s->cmos_data[RTC_REG_B] & REG_B_SQWE) && s->sqw_irq))) {
         if (period_code <= 2)
             period_code += 7;
         /* period in 32 Khz cycles */
@@ -138,8 +144,15 @@
         return;
     }
 #endif
-    s->cmos_data[RTC_REG_C] |= 0xc0;
-    rtc_irq_raise(s->irq);
+    if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
+        s->cmos_data[RTC_REG_C] |= 0xc0;
+        rtc_irq_raise(s->irq);
+    }
+    if (s->cmos_data[RTC_REG_B] & REG_B_SQWE) {
+        /* Not square wave at all but we don't want 2048Hz interrupts!
+           Must be seen as a pulse.  */
+        qemu_irq_raise(s->sqw_irq);
+    }
 }
 
 static void cmos_ioport_write(void *opaque, uint32_t addr, uint32_t data)
@@ -527,13 +540,14 @@
 }
 #endif
 
-RTCState *rtc_init(int base, qemu_irq irq, int base_year)
+RTCState *rtc_init_sqw(int base, qemu_irq irq, qemu_irq sqw_irq, int base_year)
 {
     RTCState *s;
 
     s = qemu_mallocz(sizeof(RTCState));
 
     s->irq = irq;
+    s->sqw_irq = sqw_irq;
     s->cmos_data[RTC_REG_A] = 0x26;
     s->cmos_data[RTC_REG_B] = 0x02;
     s->cmos_data[RTC_REG_C] = 0x00;
@@ -563,6 +577,11 @@
     return s;
 }
 
+RTCState *rtc_init(int base, qemu_irq irq, int base_year)
+{
+    return rtc_init_sqw(base, irq, NULL, base_year);
+}
+
 /* Memory mapped interface */
 static uint32_t cmos_mm_readb (void *opaque, target_phys_addr_t addr)
 {

Modified: trunk/hw/pc.h
===================================================================
--- trunk/hw/pc.h       2009-04-07 22:03:44 UTC (rev 7030)
+++ trunk/hw/pc.h       2009-04-07 22:28:50 UTC (rev 7031)
@@ -90,6 +90,7 @@
 typedef struct RTCState RTCState;
 
 RTCState *rtc_init(int base, qemu_irq irq, int base_year);
+RTCState *rtc_init_sqw(int base, qemu_irq irq, qemu_irq sqw_irq, int 
base_year);
 RTCState *rtc_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq,
                       int base_year);
 void rtc_set_memory(RTCState *s, int addr, int val);