qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [4375] Add a file missing from the previous commit.


From: Andrzej Zaborowski
Subject: [Qemu-devel] [4375] Add a file missing from the previous commit.
Date: Wed, 07 May 2008 14:41:38 +0000

Revision: 4375
          http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=4375
Author:   balrog
Date:     2008-05-07 14:41:37 +0000 (Wed, 07 May 2008)

Log Message:
-----------
Add a file missing from the previous commit.

Modified Paths:
--------------
    trunk/hw/nseries.c

Added Paths:
-----------
    trunk/hw/tsc2005.c

Modified: trunk/hw/nseries.c
===================================================================
--- trunk/hw/nseries.c  2008-05-07 14:30:38 UTC (rev 4374)
+++ trunk/hw/nseries.c  2008-05-07 14:41:37 UTC (rev 4375)
@@ -1031,4 +1031,5 @@
     "n810",
     "Nokia N810 tablet aka. RX-44 (OMAP2420)",
     n810_init,
+    (0x08000000 + 0x00010000 + OMAP242X_SRAM_SIZE) | RAMSIZE_FIXED,
 };

Added: trunk/hw/tsc2005.c
===================================================================
--- trunk/hw/tsc2005.c                          (rev 0)
+++ trunk/hw/tsc2005.c  2008-05-07 14:41:37 UTC (rev 4375)
@@ -0,0 +1,601 @@
+/*
+ * TI TSC2005 emulator.
+ *
+ * Copyright (c) 2006 Andrzej Zaborowski  <address@hidden>
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "hw.h"
+#include "qemu-timer.h"
+#include "console.h"
+#include "omap.h"
+
+#define TSC_DATA_REGISTERS_PAGE                0x0
+#define TSC_CONTROL_REGISTERS_PAGE     0x1
+#define TSC_AUDIO_REGISTERS_PAGE       0x2
+
+#define TSC_VERBOSE
+
+#define TSC_CUT_RESOLUTION(value, p)   ((value) >> (16 - (p ? 12 : 10)))
+
+struct tsc2005_state_s {
+    qemu_irq pint;     /* Combination of the nPENIRQ and DAV signals */
+    QEMUTimer *timer;
+    uint16_t model;
+
+    int x, y;
+    int pressure;
+
+    int state, reg, irq, command;
+    uint16_t data, dav;
+
+    int busy;
+    int enabled;
+    int host_mode;
+    int function;
+    int nextfunction;
+    int precision;
+    int nextprecision;
+    int filter;
+    int pin_func;
+    int timing[2];
+    int noise;
+    int reset;
+    int pdst;
+    int pnd0;
+    uint16_t temp_thr[2];
+    uint16_t aux_thr[2];
+
+    int tr[8];
+};
+
+enum {
+    TSC_MODE_XYZ_SCAN  = 0x0,
+    TSC_MODE_XY_SCAN,
+    TSC_MODE_X,
+    TSC_MODE_Y,
+    TSC_MODE_Z,
+    TSC_MODE_AUX,
+    TSC_MODE_TEMP1,
+    TSC_MODE_TEMP2,
+    TSC_MODE_AUX_SCAN,
+    TSC_MODE_X_TEST,
+    TSC_MODE_Y_TEST,
+    TSC_MODE_TS_TEST,
+    TSC_MODE_RESERVED,
+    TSC_MODE_XX_DRV,
+    TSC_MODE_YY_DRV,
+    TSC_MODE_YX_DRV,
+};
+
+static const uint16_t mode_regs[16] = {
+    0xf000,    /* X, Y, Z scan */
+    0xc000,    /* X, Y scan */
+    0x8000,    /* X */
+    0x4000,    /* Y */
+    0x3000,    /* Z */
+    0x0800,    /* AUX */
+    0x0400,    /* TEMP1 */
+    0x0200,    /* TEMP2 */
+    0x0800,    /* AUX scan */
+    0x0040,    /* X test */
+    0x0020,    /* Y test */
+    0x0080,    /* Short-circuit test */
+    0x0000,    /* Reserved */
+    0x0000,    /* X+, X- drivers */
+    0x0000,    /* Y+, Y- drivers */
+    0x0000,    /* Y+, X- drivers */
+};
+
+#define X_TRANSFORM(s)                 \
+    ((s->y * s->tr[0] - s->x * s->tr[1]) / s->tr[2] + s->tr[3])
+#define Y_TRANSFORM(s)                 \
+    ((s->y * s->tr[4] - s->x * s->tr[5]) / s->tr[6] + s->tr[7])
+#define Z1_TRANSFORM(s)                        \
+    ((400 - ((s)->x >> 7) + ((s)->pressure << 10)) << 4)
+#define Z2_TRANSFORM(s)                        \
+    ((4000 + ((s)->y >> 7) - ((s)->pressure << 10)) << 4)
+
+#define AUX_VAL                                (700 << 4)      /* +/- 3 at 
12-bit */
+#define TEMP1_VAL                      (1264 << 4)     /* +/- 5 at 12-bit */
+#define TEMP2_VAL                      (1531 << 4)     /* +/- 5 at 12-bit */
+
+#define TSC_POWEROFF_DELAY             50
+#define TSC_SOFTSTEP_DELAY             50
+
+static uint16_t tsc2005_read(struct tsc2005_state_s *s, int reg)
+{
+    uint16_t ret;
+
+    switch (reg) {
+    case 0x0:  /* X */
+        s->dav &= ~mode_regs[TSC_MODE_X];
+        return TSC_CUT_RESOLUTION(X_TRANSFORM(s), s->precision) +
+                (s->noise & 3);
+    case 0x1:  /* Y */
+        s->dav &= ~mode_regs[TSC_MODE_Y];
+        s->noise ++;
+        return TSC_CUT_RESOLUTION(Y_TRANSFORM(s), s->precision) ^
+                (s->noise & 3);
+    case 0x2:  /* Z1 */
+        s->dav &= 0xdfff;
+        return TSC_CUT_RESOLUTION(Z1_TRANSFORM(s), s->precision) -
+                (s->noise & 3);
+    case 0x3:  /* Z2 */
+        s->dav &= 0xefff;
+        return TSC_CUT_RESOLUTION(Z2_TRANSFORM(s), s->precision) |
+                (s->noise & 3);
+
+    case 0x4:  /* AUX */
+        s->dav &= ~mode_regs[TSC_MODE_AUX];
+        return TSC_CUT_RESOLUTION(AUX_VAL, s->precision);
+
+    case 0x5:  /* TEMP1 */
+        s->dav &= ~mode_regs[TSC_MODE_TEMP1];
+        return TSC_CUT_RESOLUTION(TEMP1_VAL, s->precision) -
+                (s->noise & 5);
+    case 0x6:  /* TEMP2 */
+        s->dav &= 0xdfff;
+        s->dav &= ~mode_regs[TSC_MODE_TEMP2];
+        return TSC_CUT_RESOLUTION(TEMP2_VAL, s->precision) ^
+                (s->noise & 3);
+
+    case 0x7:  /* Status */
+        ret = s->dav | (s->reset << 7) | (s->pdst << 2) | 0x0;
+        s->dav &= ~(mode_regs[TSC_MODE_X_TEST] | mode_regs[TSC_MODE_Y_TEST] |
+                        mode_regs[TSC_MODE_TS_TEST]);
+        s->reset = 1;
+        return ret;
+
+    case 0x8:  /* AUX high treshold */
+        return s->aux_thr[1];
+    case 0x9:  /* AUX low treshold */
+        return s->aux_thr[0];
+
+    case 0xa:  /* TEMP high treshold */
+        return s->temp_thr[1];
+    case 0xb:  /* TEMP low treshold */
+        return s->temp_thr[0];
+
+    case 0xc:  /* CFR0 */
+        return (s->pressure << 15) | ((!s->busy) << 14) |
+                (s->nextprecision << 13) | s->timing[0]; 
+    case 0xd:  /* CFR1 */
+        return s->timing[1];
+    case 0xe:  /* CFR2 */
+        return (s->pin_func << 14) | s->filter;
+
+    case 0xf:  /* Function select status */
+        return s->function >= 0 ? 1 << s->function : 0;
+    }
+
+    /* Never gets here */
+    return 0xffff;
+}
+
+static void tsc2005_write(struct tsc2005_state_s *s, int reg, uint16_t data)
+{
+    switch (reg) {
+    case 0x8:  /* AUX high treshold */
+        s->aux_thr[1] = data;
+        break;
+    case 0x9:  /* AUX low treshold */
+        s->aux_thr[0] = data;
+        break;
+
+    case 0xa:  /* TEMP high treshold */
+        s->temp_thr[1] = data;
+        break;
+    case 0xb:  /* TEMP low treshold */
+        s->temp_thr[0] = data;
+        break;
+
+    case 0xc:  /* CFR0 */
+        s->host_mode = data >> 15;
+        s->enabled = !(data & 0x4000);
+        if (s->busy && !s->enabled)
+            qemu_del_timer(s->timer);
+        s->busy &= s->enabled;
+        s->nextprecision = (data >> 13) & 1;
+        s->timing[0] = data & 0x1fff;
+        if ((s->timing[0] >> 11) == 3)
+            fprintf(stderr, "%s: illegal conversion clock setting\n",
+                            __FUNCTION__);
+        break;
+    case 0xd:  /* CFR1 */
+        s->timing[1] = data & 0xf07;
+        break;
+    case 0xe:  /* CFR2 */
+        s->pin_func = (data >> 14) & 3;
+        s->filter = data & 0x3fff;
+        break;
+
+    default:
+        fprintf(stderr, "%s: write into read-only register %x\n",
+                        __FUNCTION__, reg);
+    }
+}
+
+/* This handles most of the chip's logic.  */
+static void tsc2005_pin_update(struct tsc2005_state_s *s)
+{
+    int64_t expires;
+    int pin_state;
+
+    switch (s->pin_func) {
+    case 0:
+        pin_state = !s->pressure && !!s->dav;
+        break;
+    case 1:
+    case 3:
+    default:
+        pin_state = !s->dav;
+        break;
+    case 2:
+        pin_state = !s->pressure;
+    }
+
+    if (!s->enabled)
+        pin_state = 0;
+
+    if (pin_state != s->irq) {
+        s->irq = pin_state;
+        qemu_set_irq(s->pint, s->irq);
+    }
+
+    switch (s->nextfunction) {
+    case TSC_MODE_XYZ_SCAN:
+    case TSC_MODE_XY_SCAN:
+        if (!s->pressure)
+            return;
+        /* Fall through */
+    case TSC_MODE_AUX_SCAN:
+        break;
+
+    case TSC_MODE_X:
+    case TSC_MODE_Y:
+    case TSC_MODE_Z:
+        if (!s->pressure)
+            return;
+        /* Fall through */
+    case TSC_MODE_AUX:
+    case TSC_MODE_TEMP1:
+    case TSC_MODE_TEMP2:
+    case TSC_MODE_X_TEST:
+    case TSC_MODE_Y_TEST:
+    case TSC_MODE_TS_TEST:
+        if (s->dav)
+            s->enabled = 0;
+        break;
+
+    case TSC_MODE_RESERVED:
+    case TSC_MODE_XX_DRV:
+    case TSC_MODE_YY_DRV:
+    case TSC_MODE_YX_DRV:
+    default:
+        return;
+    }
+
+    if (!s->enabled || s->busy)
+        return;
+
+    s->busy = 1;
+    s->precision = s->nextprecision;
+    s->function = s->nextfunction;
+    s->pdst = !s->pnd0;        /* Synchronised on internal clock */
+    expires = qemu_get_clock(vm_clock) + (ticks_per_sec >> 7);
+    qemu_mod_timer(s->timer, expires);
+}
+
+static void tsc2005_reset(struct tsc2005_state_s *s)
+{
+    s->state = 0;
+    s->pin_func = 0;
+    s->enabled = 0;
+    s->busy = 0;
+    s->nextprecision = 0;
+    s->nextfunction = 0;
+    s->timing[0] = 0;
+    s->timing[1] = 0;
+    s->irq = 0;
+    s->dav = 0;
+    s->reset = 0;
+    s->pdst = 1;
+    s->pnd0 = 0;
+    s->function = -1;
+    s->temp_thr[0] = 0x000;
+    s->temp_thr[1] = 0xfff;
+    s->aux_thr[0] = 0x000;
+    s->aux_thr[1] = 0xfff;
+
+    tsc2005_pin_update(s);
+}
+
+uint8_t tsc2005_txrx_word(void *opaque, uint8_t value)
+{
+    struct tsc2005_state_s *s = opaque;
+    uint32_t ret = 0;
+
+    switch (s->state ++) {
+    case 0:
+        if (value & 0x80) {
+            /* Command */
+            if (value & (1 << 1))
+                tsc2005_reset(s);
+            else {
+                s->nextfunction = (value >> 3) & 0xf;
+                s->nextprecision = (value >> 2) & 1;
+                if (s->enabled != !(value & 1)) {
+                    s->enabled = !(value & 1);
+                    fprintf(stderr, "%s: touchscreen sense %sabled\n",
+                                    __FUNCTION__, s->enabled ? "en" : "dis");
+                }
+                tsc2005_pin_update(s);
+            }
+
+            s->state = 0;
+        } else if (value) {
+            /* Data transfer */
+            s->reg = (value >> 3) & 0xf;
+            s->pnd0 = (value >> 1) & 1;
+            s->command = value & 1;
+
+            if (s->command) {
+                /* Read */
+                s->data = tsc2005_read(s, s->reg);
+                tsc2005_pin_update(s);
+            } else
+                s->data = 0;
+        } else
+            s->state = 0;
+        break;
+
+    case 1:
+        if (s->command)
+            ret = (s->data >> 8) & 0xff;
+        else
+            s->data |= value << 8;
+        break;
+
+    case 2:
+        if (s->command)
+            ret = s->data & 0xff;
+        else {
+            s->data |= value;
+            tsc2005_write(s, s->reg, s->data);
+            tsc2005_pin_update(s);
+        }
+
+        s->state = 0;
+        break;
+    }
+
+    return ret;
+}
+
+uint32_t tsc2005_txrx(void *opaque, uint32_t value, int len)
+{
+    uint32_t ret = 0;
+
+    len &= ~7;
+    while (len > 0) {
+        len -= 8;
+        ret |= tsc2005_txrx_word(opaque, (value >> len) & 0xff) << len;
+    }
+
+    return ret;
+}
+
+static void tsc2005_timer_tick(void *opaque)
+{
+    struct tsc2005_state_s *s = opaque;
+
+    /* Timer ticked -- a set of conversions has been finished.  */
+
+    if (!s->busy)
+        return;
+
+    s->busy = 0;
+    s->dav |= mode_regs[s->function];
+    s->function = -1;
+    tsc2005_pin_update(s);
+}
+
+static void tsc2005_touchscreen_event(void *opaque,
+                int x, int y, int z, int buttons_state)
+{
+    struct tsc2005_state_s *s = opaque;
+    int p = s->pressure;
+
+    if (buttons_state) {
+        s->x = x;
+        s->y = y;
+    }
+    s->pressure = !!buttons_state;
+
+    /*
+     * Note: We would get better responsiveness in the guest by
+     * signaling TS events immediately, but for now we simulate
+     * the first conversion delay for sake of correctness.
+     */
+    if (p != s->pressure)
+        tsc2005_pin_update(s);
+}
+
+static void tsc2005_save(QEMUFile *f, void *opaque)
+{
+    struct tsc2005_state_s *s = (struct tsc2005_state_s *) opaque;
+    int i;
+
+    qemu_put_be16(f, s->x);
+    qemu_put_be16(f, s->y);
+    qemu_put_byte(f, s->pressure);
+
+    qemu_put_byte(f, s->state);
+    qemu_put_byte(f, s->reg);
+    qemu_put_byte(f, s->command);
+
+    qemu_put_byte(f, s->irq);
+    qemu_put_be16s(f, &s->dav);
+    qemu_put_be16s(f, &s->data);
+
+    qemu_put_timer(f, s->timer);
+    qemu_put_byte(f, s->enabled);
+    qemu_put_byte(f, s->host_mode);
+    qemu_put_byte(f, s->function);
+    qemu_put_byte(f, s->nextfunction);
+    qemu_put_byte(f, s->precision);
+    qemu_put_byte(f, s->nextprecision);
+    qemu_put_be16(f, s->filter);
+    qemu_put_byte(f, s->pin_func);
+    qemu_put_be16(f, s->timing[0]);
+    qemu_put_be16(f, s->timing[1]);
+    qemu_put_be16s(f, &s->temp_thr[0]);
+    qemu_put_be16s(f, &s->temp_thr[1]);
+    qemu_put_be16s(f, &s->aux_thr[0]);
+    qemu_put_be16s(f, &s->aux_thr[1]);
+    qemu_put_be32(f, s->noise);
+    qemu_put_byte(f, s->reset);
+    qemu_put_byte(f, s->pdst);
+    qemu_put_byte(f, s->pnd0);
+
+    for (i = 0; i < 8; i ++)
+        qemu_put_be32(f, s->tr[i]);
+}
+
+static int tsc2005_load(QEMUFile *f, void *opaque, int version_id)
+{
+    struct tsc2005_state_s *s = (struct tsc2005_state_s *) opaque;
+    int i;
+
+    s->x = qemu_get_be16(f);
+    s->y = qemu_get_be16(f);
+    s->pressure = qemu_get_byte(f);
+
+    s->state = qemu_get_byte(f);
+    s->reg = qemu_get_byte(f);
+    s->command = qemu_get_byte(f);
+
+    s->irq = qemu_get_byte(f);
+    qemu_get_be16s(f, &s->dav);
+    qemu_get_be16s(f, &s->data);
+
+    qemu_get_timer(f, s->timer);
+    s->enabled = qemu_get_byte(f);
+    s->host_mode = qemu_get_byte(f);
+    s->function = qemu_get_byte(f);
+    s->nextfunction = qemu_get_byte(f);
+    s->precision = qemu_get_byte(f);
+    s->nextprecision = qemu_get_byte(f);
+    s->filter = qemu_get_be16(f);
+    s->pin_func = qemu_get_byte(f);
+    s->timing[0] = qemu_get_be16(f);
+    s->timing[1] = qemu_get_be16(f);
+    qemu_get_be16s(f, &s->temp_thr[0]);
+    qemu_get_be16s(f, &s->temp_thr[1]);
+    qemu_get_be16s(f, &s->aux_thr[0]);
+    qemu_get_be16s(f, &s->aux_thr[1]);
+    s->noise = qemu_get_be32(f);
+    s->reset = qemu_get_byte(f);
+    s->pdst = qemu_get_byte(f);
+    s->pnd0 = qemu_get_byte(f);
+
+    for (i = 0; i < 8; i ++)
+        s->tr[i] = qemu_get_be32(f);
+
+    s->busy = qemu_timer_pending(s->timer);
+    tsc2005_pin_update(s);
+
+    return 0;
+}
+
+static int tsc2005_iid = 0;
+
+void *tsc2005_init(qemu_irq pintdav)
+{
+    struct tsc2005_state_s *s;
+
+    s = (struct tsc2005_state_s *)
+            qemu_mallocz(sizeof(struct tsc2005_state_s));
+    s->x = 400;
+    s->y = 240;
+    s->pressure = 0;
+    s->precision = s->nextprecision = 0;
+    s->timer = qemu_new_timer(vm_clock, tsc2005_timer_tick, s);
+    s->pint = pintdav;
+    s->model = 0x2005;
+
+    s->tr[0] = 0;
+    s->tr[1] = 1;
+    s->tr[2] = 1;
+    s->tr[3] = 0;
+    s->tr[4] = 1;
+    s->tr[5] = 0;
+    s->tr[6] = 1;
+    s->tr[7] = 0;
+
+    tsc2005_reset(s);
+
+    qemu_add_mouse_event_handler(tsc2005_touchscreen_event, s, 1,
+                    "QEMU TSC2005-driven Touchscreen");
+
+    qemu_register_reset((void *) tsc2005_reset, s);
+    register_savevm("tsc2005", tsc2005_iid ++, 0,
+                    tsc2005_save, tsc2005_load, s);
+
+    return s;
+}
+
+/*
+ * Use tslib generated calibration data to generate ADC input values
+ * from the touchscreen.  Assuming 12-bit precision was used during
+ * tslib calibration.
+ */
+void tsc2005_set_transform(void *opaque, struct mouse_transform_info_s *info)
+{
+    struct tsc2005_state_s *s = (struct tsc2005_state_s *) opaque;
+
+    /* This version assumes touchscreen X & Y axis are parallel or
+     * perpendicular to LCD's  X & Y axis in some way.  */
+    if (abs(info->a[0]) > abs(info->a[1])) {
+        s->tr[0] = 0;
+        s->tr[1] = -info->a[6] * info->x;
+        s->tr[2] = info->a[0];
+        s->tr[3] = -info->a[2] / info->a[0];
+        s->tr[4] = info->a[6] * info->y;
+        s->tr[5] = 0;
+        s->tr[6] = info->a[4];
+        s->tr[7] = -info->a[5] / info->a[4];
+    } else {
+        s->tr[0] = info->a[6] * info->y;
+        s->tr[1] = 0;
+        s->tr[2] = info->a[1];
+        s->tr[3] = -info->a[2] / info->a[1];
+        s->tr[4] = 0;
+        s->tr[5] = -info->a[6] * info->x;
+        s->tr[6] = info->a[3];
+        s->tr[7] = -info->a[5] / info->a[3];
+    }
+
+    s->tr[0] >>= 11;
+    s->tr[1] >>= 11;
+    s->tr[3] <<= 4;
+    s->tr[4] >>= 11;
+    s->tr[5] >>= 11;
+    s->tr[7] <<= 4;
+}






reply via email to

[Prev in Thread] Current Thread [Next in Thread]