[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [4218] Allow a custom unlock address in CFI02 flash (Jan Ki
From: |
Andrzej Zaborowski |
Subject: |
[Qemu-devel] [4218] Allow a custom unlock address in CFI02 flash (Jan Kiszka). |
Date: |
Wed, 16 Apr 2008 23:37:16 +0000 |
Revision: 4218
http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=4218
Author: balrog
Date: 2008-04-16 23:37:15 +0000 (Wed, 16 Apr 2008)
Log Message:
-----------
Allow a custom unlock address in CFI02 flash (Jan Kiszka).
Modified Paths:
--------------
trunk/hw/flash.h
trunk/hw/pflash_cfi02.c
trunk/hw/ppc405_boards.c
Modified: trunk/hw/flash.h
===================================================================
--- trunk/hw/flash.h 2008-04-16 23:17:02 UTC (rev 4217)
+++ trunk/hw/flash.h 2008-04-16 23:37:15 UTC (rev 4218)
@@ -13,7 +13,8 @@
BlockDriverState *bs, uint32_t sector_len,
int nb_blocs, int width,
uint16_t id0, uint16_t id1,
- uint16_t id2, uint16_t id3);
+ uint16_t id2, uint16_t id3,
+ uint16_t unlock_addr0, uint16_t unlock_addr1);
/* nand.c */
struct nand_flash_s;
Modified: trunk/hw/pflash_cfi02.c
===================================================================
--- trunk/hw/pflash_cfi02.c 2008-04-16 23:17:02 UTC (rev 4217)
+++ trunk/hw/pflash_cfi02.c 2008-04-16 23:37:15 UTC (rev 4218)
@@ -63,6 +63,7 @@
uint8_t cmd;
uint8_t status;
uint16_t ident[4];
+ uint16_t unlock_addr[2];
uint8_t cfi_len;
uint8_t cfi_table[0x52];
QEMUTimer *timer;
@@ -246,9 +247,9 @@
pfl->cmd = 0x98;
return;
}
- if (boff != 0x555 || cmd != 0xAA) {
+ if (boff != pfl->unlock_addr[0] || cmd != 0xAA) {
DPRINTF("%s: unlock0 failed " TARGET_FMT_lx " %02x %04x\n",
- __func__, boff, cmd, 0x555);
+ __func__, boff, cmd, pfl->unlock_addr[0]);
goto reset_flash;
}
DPRINTF("%s: unlock sequence started\n", __func__);
@@ -256,7 +257,7 @@
case 1:
/* We started an unlock sequence */
check_unlock1:
- if (boff != 0x2AA || cmd != 0x55) {
+ if (boff != pfl->unlock_addr[1] || cmd != 0x55) {
DPRINTF("%s: unlock1 failed " TARGET_FMT_lx " %02x\n", __func__,
boff, cmd);
goto reset_flash;
@@ -265,7 +266,7 @@
break;
case 2:
/* We finished an unlock sequence */
- if (!pfl->bypass && boff != 0x555) {
+ if (!pfl->bypass && boff != pfl->unlock_addr[0]) {
DPRINTF("%s: command failed " TARGET_FMT_lx " %02x\n", __func__,
boff, cmd);
goto reset_flash;
@@ -361,7 +362,7 @@
case 5:
switch (cmd) {
case 0x10:
- if (boff != 0x555) {
+ if (boff != pfl->unlock_addr[0]) {
DPRINTF("%s: chip erase: invalid address " TARGET_FMT_lx "\n",
__func__, offset);
goto reset_flash;
@@ -528,7 +529,8 @@
BlockDriverState *bs, uint32_t sector_len,
int nb_blocs, int width,
uint16_t id0, uint16_t id1,
- uint16_t id2, uint16_t id3)
+ uint16_t id2, uint16_t id3,
+ uint16_t unlock_addr0, uint16_t unlock_addr1)
{
pflash_t *pfl;
int32_t total_len;
@@ -573,6 +575,8 @@
pfl->ident[1] = id1;
pfl->ident[2] = id2;
pfl->ident[3] = id3;
+ pfl->unlock_addr[0] = unlock_addr0;
+ pfl->unlock_addr[1] = unlock_addr1;
/* Hardcoded CFI table (mostly from SG29 Spansion flash) */
pfl->cfi_len = 0x52;
/* Standard "QRY" string */
Modified: trunk/hw/ppc405_boards.c
===================================================================
--- trunk/hw/ppc405_boards.c 2008-04-16 23:17:02 UTC (rev 4217)
+++ trunk/hw/ppc405_boards.c 2008-04-16 23:37:15 UTC (rev 4218)
@@ -236,7 +236,7 @@
#endif
pflash_cfi02_register((uint32_t)(-bios_size), bios_offset,
drives_table[index].bdrv, 65536, fl_sectors, 2,
- 0x0001, 0x22DA, 0x0000, 0x0000);
+ 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA);
fl_idx++;
} else
#endif
@@ -553,7 +553,7 @@
#endif
pflash_cfi02_register((uint32_t)(-bios_size), bios_offset,
drives_table[index].bdrv, 65536, fl_sectors, 4,
- 0x0001, 0x22DA, 0x0000, 0x0000);
+ 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA);
fl_idx++;
} else
#endif
@@ -589,7 +589,7 @@
#endif
pflash_cfi02_register(0xfc000000, bios_offset,
drives_table[index].bdrv, 65536, fl_sectors, 4,
- 0x0001, 0x22DA, 0x0000, 0x0000);
+ 0x0001, 0x22DA, 0x0000, 0x0000, 0x555, 0x2AA);
fl_idx++;
}
/* Register CLPD & LCD display */
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [4218] Allow a custom unlock address in CFI02 flash (Jan Kiszka).,
Andrzej Zaborowski <=