[Qemu-devel] [PATCH 3/6] virtio for QEMU (v2)

[Anthony Liguori]

This patch introduces virtio support over PCI.  virtio is a generic virtual IO
framework for Linux first introduced in 2.6.23.  Since 2.6.25, virtio has
supported a PCI transport which this patch implements.

Since the last time these patches were posted to qemu-devel, I've reworked it
to use the proper access functions to manipulate guest memory.

Since v1, I've updated the patch based on the IOVector refactoring.

Signed-off-by: Anthony Liguori <address@hidden>

diff --git a/Makefile.target b/Makefile.target
index 94f3e58..6815ba8 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -534,6 +534,9 @@ OBJS += pcnet.o
 OBJS += rtl8139.o
 OBJS += e1000.o
 
+# virtio devices
+OBJS += virtio.o
+
 ifeq ($(TARGET_BASE_ARCH), i386)
 # Hardware support
 OBJS+= ide.o pckbd.o ps2.o vga.o $(SOUND_HW) dma.o
diff --git a/cutils.c b/cutils.c
index 9ef2fa6..814b3c4 100644
--- a/cutils.c
+++ b/cutils.c
@@ -95,3 +95,14 @@ time_t mktimegm(struct tm *tm)
     t += 3600 * tm->tm_hour + 60 * tm->tm_min + tm->tm_sec;
     return t;
 }
+
+int fls(int i)
+{
+    int bit;
+
+    for (bit=31; bit >= 0; bit--)
+        if (i & (1 << bit))
+            return bit+1;
+
+    return 0;
+}
diff --git a/hw/virtio-pci.h b/hw/virtio-pci.h
new file mode 100644
index 0000000..9262e49
--- /dev/null
+++ b/hw/virtio-pci.h
@@ -0,0 +1,65 @@
+/*
+ * Virtio Support
+ *
+ * Copyright IBM, Corp. 2007-2008
+ *
+ * Authors:
+ *  Anthony Liguori   <address@hidden>
+ *  Rusty Russell     <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef _VIRTIO_PCI_H
+#define _VIRTIO_PCI_H
+
+/* from Linux's linux/virtio_ring.h */
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT      1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE     2
+
+/* This means don't notify other side when buffer added. */
+#define VRING_USED_F_NO_NOTIFY 1
+/* This means don't interrupt guest when buffer consumed. */
+#define VRING_AVAIL_F_NO_INTERRUPT     1
+
+#define VIRTIO_PCI_QUEUE_MAX   16
+
+/* from Linux's linux/virtio_pci.h */
+
+/* A 32-bit r/o bitmask of the features supported by the host */
+#define VIRTIO_PCI_HOST_FEATURES       0
+
+/* A 32-bit r/w bitmask of features activated by the guest */
+#define VIRTIO_PCI_GUEST_FEATURES      4
+
+/* A 32-bit r/w PFN for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_PFN           8
+
+/* A 16-bit r/o queue size for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_NUM           12
+
+/* A 16-bit r/w queue selector */
+#define VIRTIO_PCI_QUEUE_SEL           14
+
+/* A 16-bit r/w queue notifier */
+#define VIRTIO_PCI_QUEUE_NOTIFY                16
+
+/* An 8-bit device status register.  */
+#define VIRTIO_PCI_STATUS              18
+
+/* An 8-bit r/o interrupt status register.  Reading the value will return the
+ * current contents of the ISR and will also clear it.  This is effectively
+ * a read-and-acknowledge. */
+#define VIRTIO_PCI_ISR                 19
+
+#define VIRTIO_PCI_CONFIG              20
+
+/* Virtio ABI version, if we increment this, we break the guest driver. */
+#define VIRTIO_PCI_ABI_VERSION         0
+
+#endif
diff --git a/hw/virtio.c b/hw/virtio.c
new file mode 100644
index 0000000..42c5551
--- /dev/null
+++ b/hw/virtio.c
@@ -0,0 +1,594 @@
+/*
+ * Virtio Support
+ *
+ * Copyright IBM, Corp. 2007-2008
+ *
+ * Authors:
+ *  Anthony Liguori   <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */ 
+
+#include <inttypes.h>
+#include <err.h>
+
+#include "virtio.h"
+#include "sysemu.h"
+#include "virtio-pci.h"
+
+typedef struct VRingDesc
+{
+    /* Address (guest-physical). */
+    uint64_t addr;
+    /* Length. */
+    uint32_t len;
+    /* The flags as indicated above. */
+    uint16_t flags;
+    /* We chain unused descriptors via this, too */
+    uint16_t next;
+} VRingDesc;
+
+typedef struct VRingAvail
+{
+    uint16_t flags;
+    uint16_t idx;
+    uint16_t ring[];
+} VRingAvail;
+
+typedef struct VRingUsedElem
+{
+    /* Index of start of used descriptor chain. */
+    uint32_t id;
+    /* Total length of the descriptor chain which was used (written to) */
+    uint32_t len;
+} VRingUsedElem;
+
+typedef struct VRingUsed
+{
+    uint16_t flags;
+    uint16_t idx;
+    VRingUsedElem ring[];
+} VRingUsed;
+
+typedef struct VRing
+{
+    unsigned int num;
+    target_phys_addr_t desc;
+    target_phys_addr_t avail;
+    target_phys_addr_t used;
+} VRing;
+
+struct VirtQueue
+{
+    VRing vring;
+    uint32_t pfn;
+    uint16_t last_avail_idx;
+    void (*handle_output)(VirtIODevice *vdev, VirtQueue *vq);
+    int index;
+    VirtIODevice *vdev;
+};
+
+/* QEMU doesn't strictly need write barriers since everything runs in
+ * lock-step.  We'll leave the calls to wmb() in though to make it obvious for
+ * KVM or if kqemu gets SMP support.
+ */
+
+#define wmb() do { } while (0)
+
+/* FIXME put this somewhere generic */
+#define offsetof(type, member) ((unsigned long)(&((type *)0)->member))
+
+/* virt queue functions */
+
+static void virtqueue_init(VirtQueue *vq, target_phys_addr_t p)
+{
+    vq->vring.desc = p;
+    vq->vring.avail = p + vq->vring.num * 16;
+    vq->vring.used = vq->vring.avail + 2 * (2 + vq->vring.num);
+    vq->vring.used = TARGET_PAGE_ALIGN(vq->vring.used);
+}
+
+static uint64_t vring_desc_addr(VirtQueue *vq, unsigned int i)
+{
+    return ldq_phys(vq->vring.desc + i * sizeof(VRingDesc) +
+                   offsetof(VRingDesc, addr));
+}
+
+static uint32_t vring_desc_len(VirtQueue *vq, unsigned int i)
+{
+    return ldl_phys(vq->vring.desc + i * sizeof(VRingDesc) + 
+                   offsetof(VRingDesc, len));
+}
+
+static uint16_t vring_desc_flags(VirtQueue *vq, unsigned int i)
+{
+    return lduw_phys(vq->vring.desc + i * sizeof(VRingDesc) + 
+                    offsetof(VRingDesc, flags));
+}
+
+static uint16_t vring_desc_next(VirtQueue *vq, unsigned int i)
+{
+    return lduw_phys(vq->vring.desc + i * sizeof(VRingDesc) + 
+                    offsetof(VRingDesc, next));
+}
+
+static uint16_t vring_avail_flags(VirtQueue *vq)
+{
+    return lduw_phys(vq->vring.avail + offsetof(VRingAvail, flags));
+}
+
+static uint16_t vring_avail_idx(VirtQueue *vq)
+{
+    return lduw_phys(vq->vring.avail + offsetof(VRingAvail, idx));
+}
+
+static uint16_t vring_avail_ring(VirtQueue *vq, unsigned int i)
+{
+    return lduw_phys(vq->vring.avail + offsetof(VRingAvail, ring[i]));
+}
+
+static void vring_used_set_flag(VirtQueue *vq, uint16_t flag)
+{
+    stw_phys(vq->vring.used + offsetof(VRingUsed, flags),
+            lduw_phys(vq->vring.used + offsetof(VRingUsed, flags)) | flag);
+}
+
+static void vring_used_unset_flag(VirtQueue *vq, uint16_t flag)
+{
+    stw_phys(vq->vring.used + offsetof(VRingUsed, flags),
+            lduw_phys(vq->vring.used + offsetof(VRingUsed, flags)) & ~flag);
+}
+
+static uint16_t vring_used_get_idx(VirtQueue *vq)
+{
+    return lduw_phys(vq->vring.used + offsetof(VRingUsed, idx));
+}
+
+static void vring_used_set_idx(VirtQueue *vq, uint16_t value)
+{
+    stw_phys(vq->vring.used + offsetof(VRingUsed, idx), value);
+}
+
+static void vring_used_set_ring(VirtQueue *vq, unsigned int i,
+                               uint32_t id, uint32_t len)
+{
+    stl_phys(vq->vring.used + offsetof(VRingUsed, ring[i].id), id);
+    stl_phys(vq->vring.used + offsetof(VRingUsed, ring[i].len), len);
+}
+
+static unsigned virtqueue_next_desc(VirtQueue *vq, unsigned int i)
+{
+    unsigned int next;
+
+    /* If this descriptor says it doesn't chain, we're done. */
+    if (!(vring_desc_flags(vq, i) & VRING_DESC_F_NEXT))
+       return vq->vring.num;
+
+    /* Check they're not leading us off end of descriptors. */
+    next = vring_desc_next(vq, i);
+    /* Make sure compiler knows to grab that: we don't want it changing! */
+    wmb();
+
+    if (next >= vq->vring.num)
+       errx(1, "Desc next is %u", next);
+
+    return next;
+}
+
+void virtqueue_push(VirtQueue *vq, VirtQueueElement *elem, unsigned int len)
+{
+    uint16_t idx;
+
+    pci_device_dma_unmap(&vq->vdev->pci_dev, elem->phys_in, elem->virt_in, 1);
+    pci_device_dma_unmap(&vq->vdev->pci_dev, elem->phys_out, elem->virt_out, 
0);
+
+    idx = vring_used_get_idx(vq);
+    vring_used_set_ring(vq, idx % vq->vring.num, elem->index, len);
+    wmb();
+    vring_used_set_idx(vq, idx + 1);
+
+    qemu_free(elem->phys_in);
+    qemu_free(elem->phys_out);
+    qemu_free(elem);
+}
+
+VirtQueueElement *virtqueue_pop(VirtQueue *vq)
+{
+    unsigned int i, head;
+    unsigned int position;
+    VirtQueueElement *elem;
+
+    /* Check it isn't doing very strange things with descriptor numbers. */
+    if ((uint16_t)(vring_avail_idx(vq) - vq->last_avail_idx) > vq->vring.num)
+       errx(1, "Guest moved used index from %u to %u",
+            vq->last_avail_idx, vring_avail_idx(vq));
+
+    /* If there's nothing new since last we looked, return invalid. */
+    if (vring_avail_idx(vq) == vq->last_avail_idx)
+       return NULL;
+
+    /* Grab the next descriptor number they're advertising, and increment
+     * the index we've seen. */
+    head = vring_avail_ring(vq, vq->last_avail_idx++ % vq->vring.num);
+
+    /* If their number is silly, that's a fatal mistake. */
+    if (head >= vq->vring.num)
+       errx(1, "Guest says index %u is available", head);
+
+    /* When we start there are none of either input nor output. */
+    position = 0;
+
+    elem = qemu_mallocz(sizeof(VirtQueueElement));
+
+    elem->phys_in = iovector_new(vq->vring.num);
+    elem->phys_out = iovector_new(vq->vring.num);
+
+    elem->phys_in->num = elem->phys_out->num = 0;
+
+    i = head;
+    do {
+       IOVectorElement *sge;
+
+       if (vring_desc_flags(vq, i) & VRING_DESC_F_WRITE)
+           sge = &elem->phys_in->sg[elem->phys_in->num++];
+       else
+           sge = &elem->phys_out->sg[elem->phys_out->num++];
+
+       /* Grab the first descriptor, and check it's OK. */
+       sge->len = vring_desc_len(vq, i);
+       sge->base = vring_desc_addr(vq, i);
+
+       /* If we've got too many, that implies a descriptor loop. */
+       if ((elem->phys_in->num + elem->phys_out->num) > vq->vring.num)
+           errx(1, "Looped descriptor");
+    } while ((i = virtqueue_next_desc(vq, i)) != vq->vring.num);
+
+    elem->virt_in = pci_device_dma_map(&vq->vdev->pci_dev, elem->phys_in);
+    elem->virt_out = pci_device_dma_map(&vq->vdev->pci_dev, elem->phys_out);
+    elem->index = head;
+
+    if (elem->virt_in == NULL || elem->virt_out == NULL)
+       errx(1, "Bad DMA");
+
+    return elem;
+}
+
+/* virtio device */
+
+static VirtIODevice *to_virtio_device(PCIDevice *pci_dev)
+{
+    return (VirtIODevice *)pci_dev;
+}
+
+static void virtio_update_irq(VirtIODevice *vdev)
+{
+    qemu_set_irq(vdev->pci_dev.irq[0], vdev->isr & 1);
+}
+
+void virtio_reset(void *opaque)
+{
+    VirtIODevice *vdev = opaque;
+    int i;
+
+    vdev->features = 0;
+    vdev->queue_sel = 0;
+    vdev->status = 0;
+    vdev->isr = 0;
+
+    for(i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) {
+        vdev->vq[i].vring.desc = 0;
+        vdev->vq[i].vring.avail = 0;
+        vdev->vq[i].vring.used = 0;
+        vdev->vq[i].last_avail_idx = 0;
+        vdev->vq[i].pfn = 0;
+    }
+}
+
+static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
+{
+    VirtIODevice *vdev = to_virtio_device(opaque);
+    ram_addr_t pa;
+
+    addr -= vdev->addr;
+
+    switch (addr) {
+    case VIRTIO_PCI_GUEST_FEATURES:
+       if (vdev->set_features)
+           vdev->set_features(vdev, val);
+       vdev->features = val;
+       break;
+    case VIRTIO_PCI_QUEUE_PFN:
+       pa = (ram_addr_t)val << TARGET_PAGE_BITS;
+       vdev->vq[vdev->queue_sel].pfn = val;
+       if (pa == 0)
+            virtio_reset(vdev);
+       else
+           virtqueue_init(&vdev->vq[vdev->queue_sel], pa);
+       break;
+    case VIRTIO_PCI_QUEUE_SEL:
+       if (val < VIRTIO_PCI_QUEUE_MAX)
+           vdev->queue_sel = val;
+       break;
+    case VIRTIO_PCI_QUEUE_NOTIFY:
+       if (val < VIRTIO_PCI_QUEUE_MAX && vdev->vq[val].vring.desc)
+           vdev->vq[val].handle_output(vdev, &vdev->vq[val]);
+       break;
+    case VIRTIO_PCI_STATUS:
+       vdev->status = val & 0xFF;
+       if (vdev->status == 0)
+           virtio_reset(vdev);
+       break;
+    }
+}
+
+static uint32_t virtio_ioport_read(void *opaque, uint32_t addr)
+{
+    VirtIODevice *vdev = to_virtio_device(opaque);
+    uint32_t ret = 0xFFFFFFFF;
+
+    addr -= vdev->addr;
+
+    switch (addr) {
+    case VIRTIO_PCI_HOST_FEATURES:
+       ret = vdev->get_features(vdev);
+       break;
+    case VIRTIO_PCI_GUEST_FEATURES:
+       ret = vdev->features;
+       break;
+    case VIRTIO_PCI_QUEUE_PFN:
+       ret = vdev->vq[vdev->queue_sel].pfn;
+       break;
+    case VIRTIO_PCI_QUEUE_NUM:
+       ret = vdev->vq[vdev->queue_sel].vring.num;
+       break;
+    case VIRTIO_PCI_QUEUE_SEL:
+       ret = vdev->queue_sel;
+       break;
+    case VIRTIO_PCI_STATUS:
+       ret = vdev->status;
+       break;
+    case VIRTIO_PCI_ISR:
+       /* reading from the ISR also clears it. */
+       ret = vdev->isr;
+       vdev->isr = 0;
+       virtio_update_irq(vdev);
+       break;
+    default:
+       break;
+    }
+
+    return ret;
+}
+
+static uint32_t virtio_config_readb(void *opaque, uint32_t addr)
+{
+    VirtIODevice *vdev = opaque;
+    uint8_t val;
+
+    addr -= vdev->addr + VIRTIO_PCI_CONFIG;
+    if (addr > (vdev->config_len - sizeof(val)))
+       return (uint32_t)-1;
+
+    memcpy(&val, vdev->config + addr, sizeof(val));
+    return val;
+}
+
+static uint32_t virtio_config_readw(void *opaque, uint32_t addr)
+{
+    VirtIODevice *vdev = opaque;
+    uint16_t val;
+
+    addr -= vdev->addr + VIRTIO_PCI_CONFIG;
+    if (addr > (vdev->config_len - sizeof(val)))
+       return (uint32_t)-1;
+
+    memcpy(&val, vdev->config + addr, sizeof(val));
+    return val;
+}
+
+static uint32_t virtio_config_readl(void *opaque, uint32_t addr)
+{
+    VirtIODevice *vdev = opaque;
+    uint32_t val;
+
+    addr -= vdev->addr + VIRTIO_PCI_CONFIG;
+    if (addr > (vdev->config_len - sizeof(val)))
+       return (uint32_t)-1;
+
+    memcpy(&val, vdev->config + addr, sizeof(val));
+    return val;
+}
+
+static void virtio_config_writeb(void *opaque, uint32_t addr, uint32_t data)
+{
+    VirtIODevice *vdev = opaque;
+    uint8_t val = data;
+
+    addr -= vdev->addr + VIRTIO_PCI_CONFIG;
+    if (addr > (vdev->config_len - sizeof(val)))
+       return;
+
+    memcpy(vdev->config + addr, &val, sizeof(val));
+
+    if (vdev->set_config)
+       vdev->set_config(vdev, vdev->config);
+}
+
+static void virtio_config_writew(void *opaque, uint32_t addr, uint32_t data)
+{
+    VirtIODevice *vdev = opaque;
+    uint16_t val = data;
+
+    addr -= vdev->addr + VIRTIO_PCI_CONFIG;
+    if (addr > (vdev->config_len - sizeof(val)))
+       return;
+
+    memcpy(vdev->config + addr, &val, sizeof(val));
+
+    if (vdev->set_config)
+       vdev->set_config(vdev, vdev->config);
+}
+
+static void virtio_config_writel(void *opaque, uint32_t addr, uint32_t data)
+{
+    VirtIODevice *vdev = opaque;
+    uint32_t val = data;
+
+    addr -= vdev->addr + VIRTIO_PCI_CONFIG;
+    if (addr > (vdev->config_len - sizeof(val)))
+       return;
+
+    memcpy(vdev->config + addr, &val, sizeof(val));
+
+    if (vdev->set_config)
+       vdev->set_config(vdev, vdev->config);
+}
+
+static void virtio_map(PCIDevice *pci_dev, int region_num,
+                      uint32_t addr, uint32_t size, int type)
+{
+    VirtIODevice *vdev = to_virtio_device(pci_dev);
+    int i;
+
+    vdev->addr = addr;
+    for (i = 0; i < 3; i++) {
+       register_ioport_write(addr, 20, 1 << i, virtio_ioport_write, vdev);
+       register_ioport_read(addr, 20, 1 << i, virtio_ioport_read, vdev);
+    }
+
+    if (vdev->config_len) {
+       register_ioport_write(addr + 20, vdev->config_len, 1,
+                             virtio_config_writeb, vdev);
+       register_ioport_write(addr + 20, vdev->config_len, 2,
+                             virtio_config_writew, vdev);
+       register_ioport_write(addr + 20, vdev->config_len, 4,
+                             virtio_config_writel, vdev);
+       register_ioport_read(addr + 20, vdev->config_len, 1,
+                            virtio_config_readb, vdev);
+       register_ioport_read(addr + 20, vdev->config_len, 2,
+                            virtio_config_readw, vdev);
+       register_ioport_read(addr + 20, vdev->config_len, 4,
+                            virtio_config_readl, vdev);
+
+       vdev->get_config(vdev, vdev->config);
+    }
+}
+
+VirtQueue *virtio_add_queue(VirtIODevice *vdev, int queue_size,
+                           void (*handle_output)(VirtIODevice *, VirtQueue *))
+{
+    int i;
+
+    for (i = 0; i < VIRTIO_PCI_QUEUE_MAX; i++) {
+       if (vdev->vq[i].vring.num == 0)
+           break;
+    }
+
+    if (i == VIRTIO_PCI_QUEUE_MAX)
+       abort();
+
+    vdev->vq[i].vring.num = queue_size;
+    vdev->vq[i].handle_output = handle_output;
+    vdev->vq[i].index = i;
+    vdev->vq[i].vdev = vdev;
+
+    return &vdev->vq[i];
+}
+
+void virtio_notify_config(VirtIODevice *vdev)
+{
+    /* make sure we have the latest config */
+    vdev->get_config(vdev, vdev->config);
+    vdev->isr = 3;
+    virtio_update_irq(vdev);
+}
+
+void virtio_notify(VirtIODevice *vdev, VirtQueue *vq)
+{
+    /* Always notify when queue is empty */
+    if (vring_avail_idx(vq) != vq->last_avail_idx &&
+       (vring_avail_flags(vq) & VRING_AVAIL_F_NO_INTERRUPT))
+       return;
+
+    vdev->isr = 1;
+    virtio_update_irq(vdev);
+}
+
+void virtio_ring_set_used_no_notify(VirtQueue *vq, int enable)
+{
+    if (enable)
+       vring_used_set_flag(vq, VRING_USED_F_NO_NOTIFY);
+    else
+       vring_used_unset_flag(vq, VRING_USED_F_NO_NOTIFY);
+}
+
+size_t virtio_ring_avail_size(VirtQueue *vq)
+{
+    return vring_avail_idx(vq) - vq->last_avail_idx;
+}
+
+int virtio_ring_inited(VirtQueue *vq)
+{
+    return (vq->vring.avail != 0);
+}
+
+VirtIODevice *virtio_init_pci(PCIBus *bus, const char *name,
+                             uint16_t vendor, uint16_t device,
+                             uint16_t subvendor, uint16_t subdevice,
+                             uint8_t class_code, uint8_t subclass_code,
+                             uint8_t pif, size_t config_size,
+                             size_t struct_size)
+{
+    VirtIODevice *vdev;
+    PCIDevice *pci_dev;
+    uint8_t *config;
+    uint32_t size;
+
+    pci_dev = pci_register_device(bus, name, struct_size,
+                                 -1, NULL, NULL);
+    vdev = to_virtio_device(pci_dev);
+
+    vdev->status = 0;
+    vdev->isr = 0;
+    vdev->queue_sel = 0;
+    vdev->vq = qemu_mallocz(sizeof(VirtQueue) * VIRTIO_PCI_QUEUE_MAX);
+
+    config = pci_dev->config;
+    config[0x00] = vendor & 0xFF;
+    config[0x01] = (vendor >> 8) & 0xFF;
+    config[0x02] = device & 0xFF;
+    config[0x03] = (device >> 8) & 0xFF;
+
+    config[0x08] = VIRTIO_PCI_ABI_VERSION;
+
+    config[0x09] = pif;
+    config[0x0a] = subclass_code;
+    config[0x0b] = class_code;
+    config[0x0e] = 0x00;
+
+    config[0x2c] = subvendor & 0xFF;
+    config[0x2d] = (subvendor >> 8) & 0xFF;
+    config[0x2e] = subdevice & 0xFF;
+    config[0x2f] = (subdevice >> 8) & 0xFF;
+
+    config[0x3d] = 1;
+
+    vdev->name = name;
+    vdev->config_len = config_size;
+    if (vdev->config_len)
+       vdev->config = qemu_mallocz(config_size);
+    else
+       vdev->config = NULL;
+
+    size = 20 + config_size;
+    if (size & (size-1))
+        size = 1 << fls(size);
+
+    pci_register_io_region(pci_dev, 0, size, PCI_ADDRESS_SPACE_IO,
+                          virtio_map);
+    qemu_register_reset(virtio_reset, vdev);
+
+    return vdev;
+}
diff --git a/hw/virtio.h b/hw/virtio.h
new file mode 100644
index 0000000..25c3b62
--- /dev/null
+++ b/hw/virtio.h
@@ -0,0 +1,89 @@
+/*
+ * Virtio Support
+ *
+ * Copyright IBM, Corp. 2007-2008
+ *
+ * Authors:
+ *  Anthony Liguori   <address@hidden>
+ *  Rusty Russell     <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef _QEMU_VIRTIO_H
+#define _QEMU_VIRTIO_H
+
+#include "hw.h"
+#include "pci.h"
+#include "iovector.h"
+
+/* from Linux's linux/virtio_config.h */
+
+/* Status byte for guest to report progress, and synchronize features. */
+/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
+#define VIRTIO_CONFIG_S_ACKNOWLEDGE    1
+/* We have found a driver for the device. */
+#define VIRTIO_CONFIG_S_DRIVER         2
+/* Driver has used its parts of the config, and is happy */
+#define VIRTIO_CONFIG_S_DRIVER_OK      4
+/* We've given up on this device. */
+#define VIRTIO_CONFIG_S_FAILED         0x80
+
+typedef struct VirtQueue VirtQueue;
+typedef struct VirtIODevice VirtIODevice;
+
+typedef struct VirtQueueElement
+{
+    unsigned int index;
+    IOVector *virt_in, *virt_out;
+    IOVector *phys_in, *phys_out;
+} VirtQueueElement;
+
+struct VirtIODevice
+{
+    PCIDevice pci_dev;
+    const char *name;
+    uint32_t addr;
+    uint16_t vendor;
+    uint16_t device;
+    uint8_t status;
+    uint8_t isr;
+    uint16_t queue_sel;
+    uint32_t features;
+    size_t config_len;
+    void *config;
+    uint32_t (*get_features)(VirtIODevice *vdev);
+    void (*set_features)(VirtIODevice *vdev, uint32_t val);
+    void (*get_config)(VirtIODevice *vdev, uint8_t *config);
+    void (*set_config)(VirtIODevice *vdev, const uint8_t *config);
+    VirtQueue *vq;
+};
+
+VirtIODevice *virtio_init_pci(PCIBus *bus, const char *name,
+                             uint16_t vendor, uint16_t device,
+                             uint16_t subvendor, uint16_t subdevice,
+                             uint8_t class_code, uint8_t subclass_code,
+                             uint8_t pif, size_t config_size,
+                             size_t struct_size);
+
+VirtQueue *virtio_add_queue(VirtIODevice *vdev, int queue_size,
+                           void (*handle_output)(VirtIODevice *,
+                                                 VirtQueue *));
+
+void virtqueue_push(VirtQueue *vq, VirtQueueElement *elem, unsigned int len);
+
+VirtQueueElement *virtqueue_pop(VirtQueue *vq);
+
+void virtio_notify(VirtIODevice *vdev, VirtQueue *vq);
+
+void virtio_ring_set_used_no_notify(VirtQueue *vq, int enable);
+
+size_t virtio_ring_avail_size(VirtQueue *vq);
+
+int virtio_ring_inited(VirtQueue *vq);
+
+void virtio_notify_config(VirtIODevice *vdev);
+
+#endif
diff --git a/qemu-common.h b/qemu-common.h
index 746dcc5..cd387b1 100644
--- a/qemu-common.h
+++ b/qemu-common.h
@@ -85,6 +85,7 @@ char *pstrcat(char *buf, int buf_size, const char *s);
 int strstart(const char *str, const char *val, const char **ptr);
 int stristart(const char *str, const char *val, const char **ptr);
 time_t mktimegm(struct tm *tm);
+int fls(int i);
 
 /* Error handling.  */