[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] Creating a simple

From: Alessandro Corradi
Subject: [Qemu-devel] Creating a simple
Date: Mon, 12 Jun 2006 10:07:28 +0200

Hi all,

I'm trying to write a simple virtual hardware for QEMU. This hw must only return the value 0 every time I read at 0x6f8 address.
It looks like simple but I'm not sure... this is what I do...
I wrote a file in hw dir called hwfitt.c and implements hwfitt_ioport_read and *hwfitt_init functions.
In hwfitt_ioport_read must be a function that implements the hardware read control right?
I take for instance parallel.c code and I write hwfitt function call in files where parallel's function are called (pc.c vl.c  vl.h) and modified make file. I didn't implement hwupdate_update_irq as in parallel code. Is an error?
This is my hwfitt.c code. Can you support me?



#include "vl.h"

#define HW_STS_READY    0x10
#define HW_STS_BUSY    0x80

#define HW_CTR_INIT    0x01

struct HwFittState {
    uint8_t data;
    uint8_t status;
    uint8_t control;
    int irq;
    int irq_pending;
    CharDriverState *chr;
    int hw_driver;

/*static void hwupdate_update_irq(ParallelState *s)
    if (s->irq_pending)
        pic_set_irq(s->irq, 1);
        pic_set_irq(s->irq, 0);

static uint32_t hwfitt_ioport_read(void *opaque, uint32_t addr) {
    HwFittState *s = opaque;
    uint32_t ret= 0xff;
    addr &= 7;
    switch(addr) {
    case 0:
        if(s->hw_driver) {
            s->data="">         }
        ret = s->data;
    case 1:
        if(s->hw_driver) {
    case 2:
        if(s->hw_driver) {
        ret = s->control;
    printf("hwfitt: read addr=0x%02x val=0x%02x\n", addr, ret);
    return ret;

HwFittState *hwfitt_init(int base, int irq, CharDriverState *chr){
    HwFittState *s;
    s->chr = chr;
    s->hw_driver = 1;
    s->irq = irq;
    s->data = "">     s->status = HW_STS_READY;
    s->status |= HW_STS_BUSY;
    s->control = HW_CTR_INIT;
    register_ioport_read(base, 8, 1, hwfitt_ioport_read, s);
    return s;

reply via email to

[Prev in Thread] Current Thread [Next in Thread]