ok Bootdata ok (command line is initrd=initrd.img devfs=nomount ramdisk_size=9216 BOOT_IMAGE=vmlinuz text console=ttyS0,115200) Linux version 2.4.21-37.EL (address@hidden) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-52)) #1 SMP Wed Sep 28 12:59:51 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 0000000000100000 - 000000000c000000 (usable) kernel direct mapping tables upto 1000c000000 @ 8000-a000 No NUMA configuration found Faking a node at 0000000000000000-000000000c000000 Bootmem setup node 0 0000000000000000-000000000c000000 found SMP MP-table at 000fb0f0 hm, page 000fb000 reserved twice. hm, page 000fc000 reserved twice. hm, page 000fb000 reserved twice. setting up node 0 0-c000 On node 0 totalpages: 49152 zone(0): 4096 pages. zone(1): 45056 pages. zone(2): 0 pages. ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: QEMUCPU <6>Product ID: 0.1 <6>APIC at: 0xFEE00000 Processor #0 6:0 APIC version 17 Processor #1 6:0 APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Setting APIC routing to flat Kernel command line: initrd=initrd.img devfs=nomount ramdisk_size=9216 BOOT_IMAGE=vmlinuz text console=ttyS0,115200 Initializing CPU#0 time.c: Detected 1.193182 MHz PIT timer. time.c: Detected 1795.263 MHz TSC timer. Console: colour VGA+ 80x25 Calibrating delay loop... 3578.26 BogoMIPS Page-cache hash table entries: 65536 (order: 7, 512 KB) Page-pin hash table entries: 16384 (order: 4, 64 KB) Dentry cache hash table entries: 32768 (order: 7, 512 KB) Inode cache hash table entries: 16384 (order: 6, 256 KB) Buffer cache hash table entries: 16384 (order: 5, 128 KB) Memory: 179516k/196608k available (1821k kernel code, 0k reserved, 1883k data, 228k init) Mount cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2 way) CPU: L2 Cache: 512K (64 bytes/line/8 way) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. POSIX conformance testing by UNIFIX mtrr: v2.02 (20020716)) CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2 way) CPU: L2 Cache: 512K (64 bytes/line/8 way) CPU0: QEMU Virtual CPU version 0.8.0 stepping 03 per-CPU timeslice cutoff: 2560.10 usecs. task migration cache decay timeout: 10 msecs. CPU present map: 3 Booting processor 1/1 rip 6000 page 0000010001bea000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. target apic 1000000 after target chip after eip write Startup point 1. Initializing CPU#1 CPU#1 (phys ID: 1) waiting for CALLOUT Waiting for send to finish... +Sending STARTUP #2. After apic_write. target apic 1000000 after target chip after eip write Startup point 1. Waiting for send to finish... +After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). Calibrating delay loop... 734.00 BogoMIPS Stack at about 0000010001bebfd4 CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2 way) CPU: L2 Cache: 512K (64 bytes/line/8 way) Intel machine check reporting enabled on CPU#1. OK. CPU1: QEMU Virtual CPU version 0.8.0 stepping 03 CPU has booted. Before bogomips. Total of 2 processors activated (4312.26 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs Using IO-APIC 2 ...changing IO-APIC physical APIC ID to 2 ... ok. ..TIMER: vector=0x31 pin1=0 pin2=-1 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. Detected 112.204 MHz APIC timer. cpu: 0, clocks: 17952695, slice: 5984231 CPU0 cpu: 1, clocks: 17952695, slice: 5984231 CPU1 checking TSC synchronization across CPUs: BIOS BUG: CPU#0 improperly initialized, has -1490 usecs TSC skew! FIXED. BIOS BUG: CPU#1 improperly initialized, has 1490 usecs TSC skew! FIXED. time.c: Using PIT based timekeeping. Setting commenced=1, go go go Starting migration thread for cpu 0 Starting migration thread for cpu 1 ACPI: Subsystem revision 20030619 PCI: Using configuration type 1 ACPI: System description tables not found ACPI-0084: *** Error: acpi_load_tables: Could not get RSDP, AE_NOT_FOUND ACPI-0134: *** Error: acpi_load_tables: Could not load tables: AE_NOT_FOUND ACPI: Unable to load the System Description Tables PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7000] at 00:01.0 PCI BIOS passed nonexistent PCI bus 0! Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 150M PCI-DMA: Disabling IOMMU. PCI: PIIX3: Enabling Passive Release on 00:01.0 Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 12288 aio_setup: sizeof(struct page) = 104 Hugetlbfs mounted. Total HugeTLB memory allocated, 0 IA32 emulation $Id: sys_ia32.c,v 1.56 2003/04/10 10:45:37 ak Exp $ pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled ttyS0 at 0x03f8 (irq = 4) is a 16450 Real Time Clock Driver v1.10e NET4: Frame Diverter 0.46 RAMDISK driver initialized: 256 RAM disks of 9216K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX3: IDE controller at PCI slot 00:01.1 PIIX3: chipset revision 0 PIIX3: not 100% native mode: will probe irqs later PCI: Setting latency timer of device 00:01.1 to 64 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio hda: QEMU HARDDISK, ATA DISK drive hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 12582912 sectors (6442 MB) w/256KiB Cache, CHS=12483/16/63, (U)DMA ide-floppy driver 0.99.newide Partition check: hda: unknown partition table ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 1024 buckets, 16Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). [9;0][8]Greetings. CentOS install init version 9.1.6.8 starting mounting /proc filesystem... done mounting /dev/pts (unix98 pty) filesystem... done CentOS install init version 9.1.6.8 using a serial console remember, cereal is an important part of a nutritionally balanced breakfast. trying to remount root filesystem read write... done mounting /tmp as ramfs... done Unable to handle kernel paging request at virtual address 0000007fbfffc148 printing rip: 000000000040046e PML4 b8aa067 PGD b8a7067 PMD b8a6067 PTE 800000000b899065 Oops: 0007 CPU 0 Pid: 0, comm: swapper Not tainted RIP: 0033:[<000000000040046e>] RSP: 002b:0000007fbfffc150 EFLAGS: 00000202 RAX: 000000000000000d RBX: 000000000045205d RCX: 000000000040c220 RDX: 0000000000000000 RSI: 0000000000000041 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000020901 R09: 000000000001f8a1 R10: 000000000001f8a0 R11: 0000000000000246 R12: 0000007fbfffc760 R13: 0000000000000002 R14: 0000007fbfffc960 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff805e8040(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000007fbfffc148 CR3: 0000000001bd1000 CR4: 00000000000006e0 Call Trace: Process swapper (pid: 0, stackpage=ffffffff8061f000) Kernel panic: Fatal exception In idle task - not syncing