Re: [Qemu-devel] [PATCH] qemu-0.7.0 Solaris Host patch (Real)

[Nardmann, Heiko]

I get the following error after running

./configure --prefix=$HOME/qemu-0.7.0.install

Install prefix    /home/nardmann/qemu-0.7.0.install
BIOS directory    /home/nardmann/qemu-0.7.0.install/share/qemu
binary directory  /home/nardmann/qemu-0.7.0.install/bin
Manual directory  /home/nardmann/qemu-0.7.0.install/share/man
ELF interp prefix /usr/gnemul/qemu-%M
Source path       /home/nardmann/qemu-0.7.0
C compiler        gcc
make              gmake
install           ginstall
host CPU          sparc
host big endian   yes
target list       i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu
gprof enabled     no
static build      no
SDL support       yes
SDL static link   yes
mingw32 support   no
Adlib support     no
FMOD support      no
OSS support       no
kqemu support     no



Then running make:

for d in i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu; do \
gmake -C $d all || exit 1 ; \
        done
gmake[1]: Entering directory `/home/nardmann/qemu-0.7.0/i386-softmmu'
gcc -Wall -O2 -g -fno-strict-aliasing -m32 -ffixed-g1 -ffixed-g2 -ffixed-g3 
-ffixed-g6 -I. -I/home/nardmann/qemu-0.7.0/target-i386 
-I/home/nardmann/qemu-0.7.0 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 
-D_LARGEFILE_SOURCE -I/home/nardmann/qemu-0.7.0/fpu 
-I/home/nardmann/qemu-0.7.0/slirp -c -o vl.o /home/nardmann/qemu-0.7.0/vl.c
In file included from /home/nardmann/qemu-0.7.0/fpu/softfloat.h:394,
                 from /home/nardmann/qemu-0.7.0/target-i386/cpu.h:41,
                 from /home/nardmann/qemu-0.7.0/vl.h:73,
                 from /home/nardmann/qemu-0.7.0/vl.c:24:
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:7:18: fenv.h: No such file or 
directory
In file included from /home/nardmann/qemu-0.7.0/fpu/softfloat.h:394,
                 from /home/nardmann/qemu-0.7.0/target-i386/cpu.h:41,
                 from /home/nardmann/qemu-0.7.0/vl.h:73,
                 from /home/nardmann/qemu-0.7.0/vl.c:24:
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:53: `FE_TONEAREST' undeclared 
here (not in a function)
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:53: enumerator value for 
`float_round_nearest_even' not integer constant
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:54: `FE_DOWNWARD' undeclared 
here (not in a function)
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:54: enumerator value for 
`float_round_down' not integer constant
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:55: `FE_UPWARD' undeclared 
here (not in a function)
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:55: enumerator value for 
`float_round_up' not integer constant
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:57: `FE_TOWARDZERO' 
undeclared here (not in a function)
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:57: enumerator value for 
`float_round_to_zero' not integer constant
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h: In function `float32_abs':
/home/nardmann/qemu-0.7.0/fpu/softfloat-native.h:164: warning: implicit 
declaration of function `fabsf'
/home/nardmann/qemu-0.7.0/vl.c: In function `init_timers':
/home/nardmann/qemu-0.7.0/vl.c:986: warning: label `use_itimer' defined but 
not used
/home/nardmann/qemu-0.7.0/vl.c: In function `net_slirp_smb':
/home/nardmann/qemu-0.7.0/vl.c:1561: warning: int format, pid_t arg (arg 4)
/home/nardmann/qemu-0.7.0/vl.c: In function `create_pidfile':
/home/nardmann/qemu-0.7.0/vl.c:1759: warning: int format, pid_t arg (arg 3)
/home/nardmann/qemu-0.7.0/vl.c: At top level:
/home/nardmann/qemu-0.7.0/vl.c:914: warning: `start_rtc_timer' defined but not 
used
gmake[1]: *** [vl.o] Error 1
gmake[1]: Leaving directory `/home/nardmann/qemu-0.7.0/i386-softmmu'
make: *** [all] Error 1

Anyone with the same problem and already having a solution for it?

On Donnerstag 28 April 2005 16:24, Ben Taylor wrote:
> Please ignore the first post. A webmail annomally sent
> the message before it was cooked. :-)
>
> This patch is mostly a collation of several sets of Solaris
> host patches that have been around.  Thanks to Juergen
> and a few others for actually having done the hard work
> of debugging and making things work.
>
> What the patch does:
>
> 1) deal with the fact that bash is not /bin/sh in Solaris
> 2) Add defaults for Solaris in configure, and deal with
>    specific behaviors that Solaris doesn't support
>    (like ln -sf not overwriting the target)
> 3) add --install= option to configure.  Solaris's
>    /usr/bin/install is not what qemu expects to see.
>    Default is ginstall, but you can also use the full path
>    to /usr/ucb/install if you don't have Gnu Fileutils
>    installed. However, it's not a good ideas to put
>    /usr/ucb in front of /usr/bin:/usr/sbin.  Modified
>    the Makefiles to use $(INSTALL)
> 4) Added --with-oss= and --oss-inc= to allow the use of the
>    OSS audio driver in Solaris. It had been previosly
>    disabled.  (SDL audio tends to stutter on Solaris)
> 5) Add snippets of code in various place to make qemu
>    compile cleanly under Solaris.
>
> Two enhancements:
> 1) ability to run with user-net if you don't have
>    a DNS server on the host
> 2) some extra Samba features in vl.c, though I admit
>    to just importing them since I don't run Samba.
>
> On solaris, from above the qemu-0.7.0 directory, type
>
> gpatch -p0 < qemu-0.7.0-solaris-patch
>
> Notes: all of the work has been done on Solaris 10 or
> Solaris express, using the blastwave gcc-3.4.3 compiler
> and libSDL-1.2.8 from blastwave.  I have seen reports
> that gcc-3.4.3 in /usr/sfw/bin is broken for qemu
> building.
>
> Ben

-- 
Heiko Nardmann (Dipl.-Ing. Technische Informatik)
secunet Security Networks AG - Sicherheit in Netzwerken (www.secunet.de),
Weidenauer Str. 223-225, D-57076 Siegen
Tel. : +49 271 48950-13, Fax  : +49 271 48950-50