[PATCH] hw/sd: Add SDHC support for SD card SPI-mode

[frank . chang]

From: Frank Chang <frank.chang@sifive.com>

In SPI-mode, SD card's OCR register: Card Capacity Status (CCS) bit
is not set to 1 correclty when the assigned SD image size is larger
than 2GB (SDHC). This will cause the SD card to be indentified as SDSC
incorrectly. CCS bit should be set to 1 if we are using SDHC.

Also, as there's no power up emulation in SPI-mode.
The OCR register: Card power up status bit bit (busy) should also
be set to 1 when reset. (busy bit is set to LOW if the card has not
finished the power up routine.)

Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
---
 hw/sd/sd.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index bb5dbff68c..9169208dbc 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -294,6 +294,18 @@ static void sd_set_ocr(SDState *sd)
 {
     /* All voltages OK */
     sd->ocr = R_OCR_VDD_VOLTAGE_WIN_HI_MASK;
+
+    if (sd->spi) {
+        /*
+         * We don't need to emulate power up sequence in SPI-mode.
+         * Thus, the card's power up status bit should be set to 1 when reset.
+         * The card's capacity status bit should also be set if SD card size
+         * is larger than 2GB for SDHC support.
+         */
+        sd->ocr = FIELD_DP32(sd->ocr, OCR, CARD_POWER_UP, 1);
+        sd->ocr = FIELD_DP32(sd->ocr, OCR, CARD_CAPACITY,
+                             sd->size > SDSC_MAX_CAPACITY);
+    }
 }
 
 static void sd_ocr_powerup(void *opaque)
@@ -560,6 +572,7 @@ static void sd_reset(DeviceState *dev)
 
     sd->state = sd_idle_state;
     sd->rca = 0x0000;
+    sd->size = size;
     sd_set_ocr(sd);
     sd_set_scr(sd);
     sd_set_cid(sd);
@@ -574,7 +587,6 @@ static void sd_reset(DeviceState *dev)
     memset(sd->function_group, 0, sizeof(sd->function_group));
     sd->erase_start = INVALID_ADDRESS;
     sd->erase_end = INVALID_ADDRESS;
-    sd->size = size;
     sd->blk_len = 0x200;
     sd->pwd_len = 0;
     sd->expecting_acmd = false;
-- 
2.31.1