Re: [PATCH 0/6] Add debug interface to kick/call on purpose

[Jason Wang]

在 2021/3/27 上午5:16, Dongli Zhang 写道:
> Hi Jason,
>
> On 3/26/21 12:24 AM, Jason Wang wrote:
> > 在 2021/3/26 下午1:44, Dongli Zhang 写道:
> > > The virtio device/driver (e.g., vhost-scsi or vhost-net) may hang due to
> > > the loss of doorbell kick, e.g.,
> > >
> > > https://urldefense.com/v3/__https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg01711.html__;!!GqivPVa7Brio!KS3pAU2cKjz4wgI4QSlE-YsJPhPG71nkE5_tGhaOf7mi_xvNxbvKkfn03rk5BNDLSEU$
> > >
> > > ... or due to the loss of IRQ, e.g., as fixed by linux kernel commit
> > > fe200ae48ef5 ("genirq: Mark polled irqs and defer the real handler").
> > >
> > > This patch introduces a new debug interface 'DeviceEvent' to DeviceClass
> > > to help narrow down if the issue is due to loss of irq/kick. So far the new
> > > interface handles only two events: 'call' and 'kick'. Any device (e.g.,
> > > virtio/vhost or VFIO) may implement the interface (e.g., via eventfd, MSI-X
> > > or legacy IRQ).
> > >
> > > The 'call' is to inject irq on purpose by admin for a specific device (e.g.,
> > > vhost-scsi) from QEMU/host to VM, while the 'kick' is to kick the doorbell
> > > on purpose by admin at QEMU/host side for a specific device.
> > >
> > >
> > > This device can be used as a workaround if call/kick is lost due to
> > > virtualization software (e.g., kernel or QEMU) issue.
> > >
> > > We may also implement the interface for VFIO PCI, e.g., to write to
> > > VFIOPCIDevice->msi_vectors[i].interrupt will be able to inject IRQ to VM
> > > on purpose. This is considered future work once the virtio part is done.
> > >
> > >
> > > Below is from live crash analysis. Initially, the queue=2 has count=15 for
> > > 'kick' eventfd_ctx. Suppose there is data in vring avail while there is no
> > > used available. We suspect this is because vhost-scsi was not notified by
> > > VM. In order to narrow down and analyze the issue, we use live crash to
> > > dump the current counter of eventfd for queue=2.
> > >
> > > crash> eventfd_ctx ffff8f67f6bbe700
> > > struct eventfd_ctx {
> > >     kref = {
> > >       refcount = {
> > >         refs = {
> > >           counter = 4
> > >         }
> > >       }
> > >     },
> > >     wqh = {
> > >       lock = {
> > >         {
> > >           rlock = {
> > >             raw_lock = {
> > >               val = {
> > >                 counter = 0
> > >               }
> > >             }
> > >           }
> > >         }
> > >       },
> > >       head = {
> > >         next = 0xffff8f841dc08e18,
> > >         prev = 0xffff8f841dc08e18
> > >       }
> > >     },
> > >     count = 15, ---> eventfd is 15 !!!
> > >     flags = 526336
> > > }
> > >
> > > Now we kick the doorbell for vhost-scsi queue=2 on purpose for diagnostic
> > > with this interface.
> > >
> > > { "execute": "x-debug-device-event",
> > >     "arguments": { "dev": "/machine/peripheral/vscsi0",
> > >                    "event": "kick", "queue": 2 } }
> > >
> > > The counter is increased to 16. Suppose the hang issue is resolved, it
> > > indicates something bad is in software that the 'kick' is lost.
> > What do you mean by "software" here? And it looks to me you're testing whether
> > event_notifier_set() is called by virtio_queue_notify() here. If so, I'm not
> > sure how much value could we gain from a dedicated debug interface like this
> > consider there're a lot of exisinting general purpose debugging method like
> > tracing or gdb. I'd say the path from virtio_queue_notify() to
> > event_notifier_set() is only a very small fraction of the process of virtqueue
> > kick which is unlikey to be buggy. Consider usually the ioeventfd will be
> > offloaded to KVM, it's more a chance that something is wrong in setuping
> > ioeventfd instead of here. Irq is even more complicated.
> Thank you very much!
>
> I am not testing whether event_notifier_set() is called by 
> virtio_queue_notify().
>
> The 'software' indicates the data processing and event notification mechanism
> involved with virtio/vhost PV driver frontend. E.g., while VM is waiting for an
> extra IRQ, vhost side did not trigger IRQ, suppose vring_need_event()
> erroneously returns false due to corrupted ring buffer status.


So there could be several factors that may block the notification:

1) eventfd bug (ioeventfd vs irqfd)
2) wrong virtqueue state (either driver or device)
3) missing barriers (either driver or device)
4) Qemu bug (irqchip and routing)
...

Consider we want to debug virtio issue, only 2) or 3) is what we really 
cared.

So for kick you did (assume vhost is on):

virtio_device_event_kick()
    virtio_queue_notify()
        event_notifier_set()

It looks to me you're actaully testing if ioeventfd is correctly set by 
Qemu.

For call you did:

virtio_device_event_call()
    event_notifier_set()

A test of irqfd is correctly set by Qemu. So all of those are not virtio 
specific stuffs but you introduce virtio specific command to do debug 
non virtio functions.

In the case of what you mentioned for vring_need_event(), what we really 
want is to dump the virtqueue state from the guest. This might requries 
some work of extending virtio spec (e.g to dump device status like 
indices, event, wrap counters).


> This was initially proposed for vhost only and I was going to export
> ioeventfd/irqfd from vhost to admin via sysfs. Finally, I realized I would
> better implement this at QEMU.
>
> The QEMU inits the eventfd (ioeventfd and irqfd), and offloads them to
> KVM/vhost. The VM side sends requests to ring buffer and kicks the doorbell (via
> ioeventfd), while the backend vhost side sends responses back and calls the IRQ
> (via ioeventfd).
>
> Unfortunately, sometimes there is issue with virtio/vhost so that kick/call was
> missed/ignored, or even never triggered. The example mentioned in the patchset
> cover letter is with virtio-net (I assume vhost=on), where a kick to ioventfd
> was ignored, due to pci-bridge/hotplug issue.


So this is not a good example since it was a chipset bug. You need to 
use other tool to debug chipset code isn't it?


> The hotplug is with a very small window but the IO hangs permanently. I did test
> that kicking the doorbell again will help recover the IO, so that I would be
> able to conclude this was due to lost of kick.
>
> The loss of irq/doorbell is painful especially in production environment where
> we are not able to attach to QEMU via gdb. While the patchset is only for QEMU,
> Xen PV driver used to experience loss of IRQ issue as well, e.g., linux kernel
> commit 4704fe4f03a5 ("xen/events: mask events when changing their VCPU 
> binding").


So looking at the git history we can see it has little possibility that 
the missing is due to virtio/vhost itself. So the commit you mention 
here is not good as well since it's not a netfront/netbackend bug.

So for the case of event call, what you did is:

satic void virtio_device_event_call(VirtQueue *vq, bool eventfd,
                                     Error **errp)
{
#ifdef DEBUG_VIRTIO_EVENT
    printf("The 'call' event is triggered for path=%s, queue=%d, 
irqfd=%d.\n",
           object_get_canonical_path(OBJECT(vq->vdev)),
           vq->queue_index, eventfd);
#endif

    if (eventfd) {
        virtio_set_isr(vq->vdev, 0x1);
        event_notifier_set(&vq->guest_notifier);
    } else {
        virtio_irq(vq);
    }
}

This means, when eventfd is set, you bypasses the MSI mask which is very 
dangerous to make it used in the case of production environment. And if 
you check masking, it won't help a lot if the MSI is masked wrongly.


> This can help "narrow down" if the IO/networking hang is due to loss of
> IRQ/doorbell issue (or VM MSI-x is erroneously masked), especially in production
> env. This can also be used as a workaround so that VM owner will not need to
> reboot VM.


So having such extra workaround is pretty dangerous in production 
environemnt where I think we need to be conservative which means we need 
to collect information instead of generating artificial event.

And it doesn't help if the wrokaround can be triggered through 
management API.


> In addition, the VFIO will benefit from it. We will be able to test if to inject
> IRQ on purpose helps when the driver (e.g., PCI, NVMe, Ethernet) developers
> blame the hang is caused by loss of IRQ with KVM/VFIO.(It seems there is more
> chance to loose IRQ during CPU hotplug or changing IRQ affinity).
>
> > I think we could not gain much for introducing an dedicated mechanism for such a
> > corner case.
> As replied by Dave for prior RFC, the QEMU already supports hmp_ioport_write to
> trigger an ioport write on purpose.


If that applies. I would rather have a hmp_mem_write then we can test 
both MSI and doorbell. But again, they are very dangerous to be used in 
production envronment.


> The linux block layer also supports the below to kick the IO queue on purpose.
>
> echo "kick" > /sys/kernel/debug/block/sda/state


This might be fine for hardware device but not virtio. The device can 
choose to poll the virtqueue instead of depending of the doorbell to 
work. And for networking subsystem, we don't have such stuffs, instead 
ethtool support to dump ring and vendor specific stuffs which could be 
used for dumping virtqueue state in this case.

Thanks


> Dongli Zhang
>
> > Thanks
> >
> >
> > > crash> eventfd_ctx ffff8f67f6bbe700
> > > struct eventfd_ctx {
> > >     kref = {
> > >       refcount = {
> > >         refs = {
> > >           counter = 4
> > >         }
> > >       }
> > >     },
> > >     wqh = {
> > >       lock = {
> > >         {
> > >           rlock = {
> > >             raw_lock = {
> > >               val = {
> > >                 counter = 0
> > >               }
> > >             }
> > >           }
> > >         }
> > >       },
> > >       head = {
> > >         next = 0xffff8f841dc08e18,
> > >         prev = 0xffff8f841dc08e18
> > >       }
> > >     },
> > >     count = 16, ---> eventfd incremented to 16 !!!
> > >     flags = 526336
> > > }
> > >
> > >
> > > Original RFC link:
> > >
> > > https://urldefense.com/v3/__https://lists.nongnu.org/archive/html/qemu-devel/2021-01/msg03441.html__;!!GqivPVa7Brio!KS3pAU2cKjz4wgI4QSlE-YsJPhPG71nkE5_tGhaOf7mi_xvNxbvKkfn03rk5UvUJ86I$
> > >
> > > Changed since RFC:
> > >     - add support for more virtio/vhost pci devices
> > >     - add log (toggled by DEBUG_VIRTIO_EVENT) to virtio.c to say that this
> > >       mischeivous command had been used
> > >     - fix grammer error (s/lost/loss/)
> > >     - change version to 6.1
> > >     - fix incorrect example in qapi/qdev.json
> > >     - manage event types with enum/array, instead of hard coding
> > >
> > >
> > > Dongli Zhang (6):
> > >      qdev: introduce qapi/hmp command for kick/call event
> > >      virtio: introduce helper function for kick/call device event
> > >      virtio-blk-pci: implement device event interface for kick/call
> > >      virtio-scsi-pci: implement device event interface for kick/call
> > >      vhost-scsi-pci: implement device event interface for kick/call
> > >      virtio-net-pci: implement device event interface for kick/call
> > >
> > >    hmp-commands.hx                 | 14 ++++++++
> > >    hw/block/virtio-blk.c           |  9 +++++
> > >    hw/net/virtio-net.c             |  9 +++++
> > >    hw/scsi/vhost-scsi.c            |  6 ++++
> > >    hw/scsi/virtio-scsi.c           |  9 +++++
> > >    hw/virtio/vhost-scsi-pci.c      | 10 ++++++
> > >    hw/virtio/virtio-blk-pci.c      | 10 ++++++
> > >    hw/virtio/virtio-net-pci.c      | 10 ++++++
> > >    hw/virtio/virtio-scsi-pci.c     | 10 ++++++
> > >    hw/virtio/virtio.c              | 64 ++++++++++++++++++++++++++++++++++++
> > >    include/hw/qdev-core.h          |  9 +++++
> > >    include/hw/virtio/vhost-scsi.h  |  3 ++
> > >    include/hw/virtio/virtio-blk.h  |  2 ++
> > >    include/hw/virtio/virtio-net.h  |  3 ++
> > >    include/hw/virtio/virtio-scsi.h |  3 ++
> > >    include/hw/virtio/virtio.h      |  3 ++
> > >    include/monitor/hmp.h           |  1 +
> > >    qapi/qdev.json                  | 30 +++++++++++++++++
> > >    softmmu/qdev-monitor.c          | 56 +++++++++++++++++++++++++++++++
> > >    19 files changed, 261 insertions(+)
> > >
> > >
> > > I did tests with below cases.
> > >
> > > - virtio-blk-pci (ioeventfd on/off, iothread, live migration)
> > > - virtio-scsi-pci (ioeventfd on/off)
> > > - vhost-scsi-pci
> > > - virtio-net-pci (ioeventfd on/off, vhost)
> > >
> > > Thank you very much!
> > >
> > > Dongli Zhang