Re: [PATCH v4 9/9] hw/sd: ssi-sd: Handle the rest commands with R1b response type

[Bin Meng]

Hi Philippe,

On Mon, Feb 8, 2021 at 10:08 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> On 1/28/21 7:30 AM, Bin Meng wrote:
> > From: Bin Meng <bin.meng@windriver.com>
> >
> > Besides CMD12, the following command's reponse type is R1b:
> >
> > - SET_WRITE_PROT (CMD28)
> > - CLR_WRITE_PROT (CMD29)
> > - ERASE (CMD38)
> >
> > Reuse the same s->stopping to indicate a R1b reponse is needed.
> >
> > Signed-off-by: Bin Meng <bin.meng@windriver.com>
> >
> > ---
> >
> > Changes in v4:
> > - new patch: handle the rest commands with R1b response type
> >
> >  hw/sd/ssi-sd.c | 6 ++++++
> >  1 file changed, 6 insertions(+)
> >
> > diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
> > index 907d681d19..97ee58e20c 100644
> > --- a/hw/sd/ssi-sd.c
> > +++ b/hw/sd/ssi-sd.c
> > @@ -194,6 +194,12 @@ static uint32_t ssi_sd_transfer(SSIPeripheral *dev, 
> > uint32_t val)
> >                  /* CMD13 returns a 2-byte statuse work. Other commands
> >                     only return the first byte.  */
> >                  s->arglen = (s->cmd == 13) ? 2 : 1;
> > +
> > +                /* handle R1b */
> > +                if (s->cmd == 28 || s->cmd == 29 || s->cmd == 38) {
>
> Why not also check CMD13 for completeness?
>

I am not sure I got your point. CMD13 does not respond with R1b but R2.

> Otherwise:
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>
> > +                    s->stopping = 1;
> > +                }
> > +
> >                  cardstatus = ldl_be_p(longresp);
> >                  status = 0;
> >                  if (((cardstatus >> 9) & 0xf) < 4)
> >

Regards,
Bin