[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 8/8] usb-host: map LIBUSB_SPEED_SUPER_PLUS to USB_SPEED_SUPER
From: |
Gerd Hoffmann |
Subject: |
[PULL 8/8] usb-host: map LIBUSB_SPEED_SUPER_PLUS to USB_SPEED_SUPER |
Date: |
Fri, 22 Jan 2021 18:48:49 +0100 |
Handle host superspeedplus (usb 3.1+) devices like superspeed (usb 3.0)
devices. That is enough to get them handled properly by xhci. They show
up as superspeed devices inside the guest, but should be able to actually
run at higher speeds.
Reported-by: Angel Pagan <Angel.Pagan@stratus.com>
Tested-by: Angel Pagan <Angel.Pagan@stratus.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210121150832.3564097-1-kraxel@redhat.com>
---
hw/usb/host-libusb.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/hw/usb/host-libusb.c b/hw/usb/host-libusb.c
index 295d20227ad3..7dde3d12069e 100644
--- a/hw/usb/host-libusb.c
+++ b/hw/usb/host-libusb.c
@@ -179,6 +179,9 @@ static void usb_host_attach_kernel(USBHostDevice *s);
#if LIBUSB_API_VERSION >= 0x01000103
# define HAVE_STREAMS 1
#endif
+#if LIBUSB_API_VERSION >= 0x01000106
+# define HAVE_SUPER_PLUS 1
+#endif
static const char *speed_name[] = {
[LIBUSB_SPEED_UNKNOWN] = "?",
@@ -186,6 +189,9 @@ static const char *speed_name[] = {
[LIBUSB_SPEED_FULL] = "12",
[LIBUSB_SPEED_HIGH] = "480",
[LIBUSB_SPEED_SUPER] = "5000",
+#ifdef HAVE_SUPER_PLUS
+ [LIBUSB_SPEED_SUPER_PLUS] = "5000+",
+#endif
};
static const unsigned int speed_map[] = {
@@ -193,6 +199,9 @@ static const unsigned int speed_map[] = {
[LIBUSB_SPEED_FULL] = USB_SPEED_FULL,
[LIBUSB_SPEED_HIGH] = USB_SPEED_HIGH,
[LIBUSB_SPEED_SUPER] = USB_SPEED_SUPER,
+#ifdef HAVE_SUPER_PLUS
+ [LIBUSB_SPEED_SUPER_PLUS] = USB_SPEED_SUPER,
+#endif
};
static const unsigned int status_map[] = {
@@ -964,8 +973,14 @@ static int usb_host_open(USBHostDevice *s, libusb_device
*dev, int hostfd)
libusb_speed = LIBUSB_SPEED_HIGH;
break;
case 5: /* super */
+ libusb_speed = LIBUSB_SPEED_SUPER;
+ break;
case 6: /* super plus */
+#ifdef HAVE_SUPER_PLUS
+ libusb_speed = LIBUSB_SPEED_SUPER_PLUS;
+#else
libusb_speed = LIBUSB_SPEED_SUPER;
+#endif
break;
}
}
--
2.29.2
- [PULL 0/8] Usb 20210122 patches, Gerd Hoffmann, 2021/01/22
- [PULL 1/8] hw/usb/host-libusb.c: fix build with kernel < 5.0, Gerd Hoffmann, 2021/01/22
- [PULL 4/8] hw/usb/hcd-xhci: Fix extraneous format-truncation error on 32-bit hosts, Gerd Hoffmann, 2021/01/22
- [PULL 5/8] scsi/utils: Add INVALID_PARAM_VALUE sense code definition, Gerd Hoffmann, 2021/01/22
- [PULL 3/8] hw/usb: Convert to qdev_realize(), Gerd Hoffmann, 2021/01/22
- [PULL 2/8] hw/usb: Fix bad printf format specifiers, Gerd Hoffmann, 2021/01/22
- [PULL 8/8] usb-host: map LIBUSB_SPEED_SUPER_PLUS to USB_SPEED_SUPER,
Gerd Hoffmann <=
- [PULL 6/8] hw/usb/dev-uas: Report command additional adb length as unsupported, Gerd Hoffmann, 2021/01/22
- [PULL 7/8] usb: add pcap support., Gerd Hoffmann, 2021/01/22
- Re: [PULL 0/8] Usb 20210122 patches, Peter Maydell, 2021/01/23