[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RFC PATCH V3 0/8] hw/block/nvme: support multi-path for ctrl/ns
|
From: |
Minwoo Im |
|
Subject: |
Re: [RFC PATCH V3 0/8] hw/block/nvme: support multi-path for ctrl/ns |
|
Date: |
Wed, 20 Jan 2021 09:44:17 +0900 |
|
User-agent: |
Mutt/1.11.4 (2019-03-13) |
On 21-01-19 19:18:16, Klaus Jensen wrote:
> On Jan 20 02:01, Minwoo Im wrote:
> > Hello,
> >
> > This patch series is third one to support multi-controller and namespace
> > sharing in multi-path. This series introduced subsystem scheme to
> > manage controller(s) and namespace(s) in the subsystem.
> >
> > This series has new patches from the V2: 'detached' parameter has been
> > added to the nvme-ns device. This will decide whether to attach the
> > namespace to controller(s) in the current subsystem or not. If it's
> > given with true, then it will be just allocated in the subsystem, but
> > not attaching to any controllers in the subsystem. Otherwise, it will
> > automatically attach to all the controllers in the subsystem. The other
> > t hing is that the last patch implemented Identify Active Namespace ID
> > List command handler apart from the Allocated Namespace ID List.
> >
> > Run with:
> > -device nvme,serial=qux,id=nvme3
> > -device nvme-ns,id=ns3,drive=drv12,nsid=3,bus=nvme3
> >
> > -device nvme-subsys,id=subsys0
> > -device nvme,serial=foo,id=nvme0,subsys=subsys0
> > -device nvme,serial=bar,id=nvme1,subsys=subsys0
> > -device nvme,serial=baz,id=nvme2,subsys=subsys0
> > -device nvme-ns,id=ns1,drive=drv10,nsid=1,subsys=subsys0,detached=true
> > -device nvme-ns,id=ns2,drive=drv11,nsid=2,bus=nvme2
> >
> > nvme-cli:
> > root@vm:~/work# nvme list -v
> >
> > NVM Express Subsystems
> >
> >
> >
> > Subsystem Subsystem-NQN
> > Controllers
> > ----------------
> > ------------------------------------------------------------------------------------------------
> > ----------------
> > nvme-subsys0 nqn.2019-08.org.qemu:qux
> > nvme0
> > nvme-subsys1 nqn.2019-08.org.qemu:subsys0
> > nvme1, nvme2, nvme3
> >
> >
> > NVM Express Controllers
> >
> >
> >
> > Device SN MN FR
> > TxPort Address Subsystem Namespaces
> > -------- -------------------- ----------------------------------------
> > -------- ------ -------------- ------------ ----------------
> > nvme0 qux QEMU NVMe Ctrl
> > 1.0 pcie 0000:00:06.0 nvme-subsys0
>
> Shouldn't nvme0n1 be listed under Namespaces for nvme0?
Oh, I missed that one from the output. As Keith mentioned, I ran the
list command again based on the latest nvme-cli.git:
Please refer the following result. I think it's okay not to send the
cover letter again :)
# nvme --version
nvme version 1.13.48.g33c6
# nvme list -v
NVM Express Subsystems
Subsystem Subsystem-NQN
Controllers
----------------
------------------------------------------------------------------------------------------------
----------------
nvme-subsys0 nqn.2019-08.org.qemu:qux
nvme0
nvme-subsys1 nqn.2019-08.org.qemu:subsys0
nvme1, nvme2, nvme3
NVM Express Controllers
Device SN MN FR
TxPort Address Subsystem Namespaces
-------- -------------------- ---------------------------------------- --------
------ -------------- ------------ ----------------
nvme0 qux QEMU NVMe Ctrl 1.0
pcie 0000:00:06.0 nvme-subsys0 nvme0n1
nvme1 foo QEMU NVMe Ctrl 1.0
pcie 0000:00:07.0 nvme-subsys1
nvme2 bar QEMU NVMe Ctrl 1.0
pcie 0000:00:08.0 nvme-subsys1
nvme3 baz QEMU NVMe Ctrl 1.0
pcie 0000:00:09.0 nvme-subsys1 nvme1c3n1
NVM Express Namespaces
Device NSID Usage Format Controllers
------------ -------- -------------------------- ----------------
----------------
nvme0n1 3 268.44 MB / 268.44 MB 512 B + 0 B nvme0
nvme1n1 2 268.44 MB / 268.44 MB 512 B + 0 B nvme3