[PATCH 00/22] hw/riscv: sifive_u: Add missing SPI support

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

This adds the missing SPI support to the `sifive_u` machine in the QEMU
mainline. With this series, upstream U-Boot for the SiFive HiFive Unleashed
board can boot on QEMU `sifive_u` out of the box. This allows users to
develop and test the recommended RISC-V boot flow with a real world use
case: ZSBL (in QEMU) loads U-Boot SPL from SD card or SPI flash to L2LIM,
then U-Boot SPL loads the payload from SD card or SPI flash that is a
combination of OpenSBI fw_dynamic firmware and U-Boot proper.

The m25p80 model is updated to support ISSI flash series. A bunch of
ssi-sd issues are fixed, and writing to SD card in SPI mode is supported.

reST documentation for RISC-V is added. Currently only `sifive_u`
machine is documented, but more to come.


Bin Meng (22):
  hw/block: m25p80: Add ISSI SPI flash support
  hw/block: m25p80: Add various ISSI flash information
  hw/sd: ssi-sd: Fix incorrect card response sequence
  hw/sd: sd: Support CMD59 for SPI mode
  hw/sd: sd: Drop sd_crc16()
  util: Add CRC16 (CCITT) calculation routines
  hw/sd: ssi-sd: Suffix a data block with CRC16
  hw/sd: ssi-sd: Support multiple block read (CMD18)
  hw/sd: ssi-sd: Use macros for the dummy value and tokens in the
    transfer
  hw/sd: sd: Remove duplicated codes in single/multiple block read/write
  hw/sd: sd: Allow single/multiple block write for SPI mode
  hw/sd: sd.h: Cosmetic change of using spaces
  hw/sd: Introduce receive_ready() callback
  hw/sd: ssi-sd: Support single block write
  hw/sd: ssi-sd: Support multiple block write
  hw/ssi: Add SiFive SPI controller support
  hw/riscv: sifive_u: Add QSPI0 controller and connect a flash
  hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card
  hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal value
  docs/system: Sort targets in alphabetical order
  docs/system: Add RISC-V documentation
  docs/system: riscv: Add documentation for sifive_u machine

 docs/system/riscv/sifive_u.rst | 336 +++++++++++++++++++++++++++++++++
 docs/system/target-riscv.rst   |  72 +++++++
 docs/system/targets.rst        |  20 +-
 include/hw/riscv/sifive_u.h    |   9 +-
 include/hw/sd/sd.h             |  44 ++---
 include/hw/ssi/sifive_spi.h    |  47 +++++
 include/qemu/crc-ccitt.h       |  33 ++++
 hw/block/m25p80.c              |  51 ++++-
 hw/riscv/sifive_u.c            |  91 +++++++++
 hw/sd/core.c                   |  13 ++
 hw/sd/sd.c                     |  82 +-------
 hw/sd/ssi-sd.c                 | 127 +++++++++++--
 hw/ssi/sifive_spi.c            | 290 ++++++++++++++++++++++++++++
 util/crc-ccitt.c               | 127 +++++++++++++
 hw/riscv/Kconfig               |   3 +
 hw/ssi/Kconfig                 |   4 +
 hw/ssi/meson.build             |   1 +
 util/meson.build               |   1 +
 18 files changed, 1232 insertions(+), 119 deletions(-)
 create mode 100644 docs/system/riscv/sifive_u.rst
 create mode 100644 docs/system/target-riscv.rst
 create mode 100644 include/hw/ssi/sifive_spi.h
 create mode 100644 include/qemu/crc-ccitt.h
 create mode 100644 hw/ssi/sifive_spi.c
 create mode 100644 util/crc-ccitt.c

-- 
2.25.1