[PATCH 04/16] hw/block/nvme: reject io commands if only admin command set selected

[Klaus Jensen]

From: Klaus Jensen <k.jensen@samsung.com>

If the host sets CC.CSS to 111b, all commands submitted to I/O queues
should be completed with status Invalid Command Opcode.

Note that this is technically a v1.4 feature, but it does not hurt to
implement before we finally bump the reported version implemented.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
---
 include/block/nvme.h | 5 +++++
 hw/block/nvme.c      | 4 ++++
 2 files changed, 9 insertions(+)

diff --git a/include/block/nvme.h b/include/block/nvme.h
index 58647bcdad0b..7a30cf285ae0 100644
--- a/include/block/nvme.h
+++ b/include/block/nvme.h
@@ -110,6 +110,11 @@ enum NvmeCcMask {
 #define NVME_CC_IOSQES(cc) ((cc >> CC_IOSQES_SHIFT) & CC_IOSQES_MASK)
 #define NVME_CC_IOCQES(cc) ((cc >> CC_IOCQES_SHIFT) & CC_IOCQES_MASK)
 
+enum NvmeCcCss {
+    NVME_CC_CSS_NVM        = 0x0,
+    NVME_CC_CSS_ADMIN_ONLY = 0x7,
+};
+
 enum NvmeCstsShift {
     CSTS_RDY_SHIFT      = 0,
     CSTS_CFS_SHIFT      = 1,
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 758f58c88026..27af2f0b38d5 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1065,6 +1065,10 @@ static uint16_t nvme_io_cmd(NvmeCtrl *n, NvmeRequest 
*req)
     trace_pci_nvme_io_cmd(nvme_cid(req), nsid, nvme_sqid(req),
                           req->cmd.opcode, nvme_io_opc_str(req->cmd.opcode));
 
+    if (NVME_CC_CSS(n->bar.cc) == NVME_CC_CSS_ADMIN_ONLY) {
+        return NVME_INVALID_OPCODE | NVME_DNR;
+    }
+
     if (!nvme_nsid_valid(n, nsid)) {
         return NVME_INVALID_NSID | NVME_DNR;
     }
-- 
2.28.0